XC7Z035-1FFG900C - 275K Logic Cell Zynq SoC | AMD
부품 번호: XC7Z035-1FFG900C ✓ 활성XC7Z035-1FFG900C 개요
A Zynq SoC is a programmable system-on-chip that combines a hardwired Arm Cortex-A9 processing system with an FPGA fabric in the same package. This product hierarchy—Zynq SoC, FPGA and CPLD, programmable logic, integrated circuit, and semiconductor—places the XC7Z035 at the intersection of embedded software execution and hardware-accelerated logic. The integrated architecture can reduce interconnects between the processor and programmable logic compared with a separate processor and FPGA design.
Key device characteristics include dual Arm Cortex-A9 MPCore cores, 275K FPGA logic cells, a 667 MHz operating frequency, a 900-FCBGA package, and 362 I/O according to the product listing data. The processing system includes on-chip memory and interfaces for external memory, while the Kintex-7 fabric supports hardware data processing, control logic, interface bridging, and accelerator functions. The Zynq-7000 architecture supports software control through the Arm Cortex-A9 subsystem and programmable hardware through the FPGA fabric.
The 31 mm by 31 mm FCBGA-900 construction provides a large ball array for high-density connectivity. Design implementation must account for the fine package pitch, multilayer PCB requirements, high-speed routing rules, power and ground distribution, and thermal performance. Because the device combines thousands of programmable logic elements with a complex processor subsystem, bitstream generation, embedded software configuration, memory-interface design, and signal-integrity verification form one integrated engineering workflow.
Typical applications include industrial automation, networked control systems, embedded vision, communications equipment, data acquisition, and high-performance embedded processing with FPGA-assisted acceleration. The programmable logic can implement parallel data paths, protocol interfaces, preprocessing pipelines, or custom accelerators while the Arm subsystem executes operating-system-level software, control logic, and network services.
A critical implementation requirement is to follow the AMD package pinout and PCB guidelines for the FFG900 package. Use the official package pinout files and Zynq-7000 documentation to assign power, ground, configuration, memory, high-speed transceiver, and I/O balls. Validate multilayer stack-up, ball escape routing, decoupling, clocking, and thermal design before fabrication.
This product page organizes the exact XC7Z035-1FFG900C identity, verified package and logic specifications, same-family replacement options, pricing status, and application guidance. It also emphasizes the engineering checks required when replacing a commercial-temperature FCBGA-900 Zynq device without changing the PCB footprint.
드롭인 대체품: XC7Z035-1FFG900C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z035-1FFG900C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Processor Core, Logic Cells, Product Type, Speed Grade.
XC7Z035-1FFG900I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z035-2FFG900I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7Z035-L2FFG900I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7Z035-1FFG900C 최대 정격 & 전기적 특성
| Product Type | Zynq-7000 system-on-chip FPGA |
| FPGA Family | Kintex-7 |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Logic Cells | 275K logic cells |
| Programmable I/O | 362 I/O |
| 패키지 | 900-FCBGA (31 mm x 31 mm) |
| Package Pin Count | 900 balls |
| 실장 유형 | Surface mount |
| SoC Architecture | Zynq-7000 first-generation architecture |
XC7Z035-1FFG900C 900 balls 핀 구성 가이드
XC7Z035-1FFG900C(900 balls 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z035-1FFG900C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z035-1FFG900C 적합 용도: 6 애플리케이션s: Industrial Automation and Motion Control, Embedded Vision and Image Processing, Communications and Network Equipment, Data Acquisition and Signal Processing, Secure Embedded Control, Aerospace and Defense Test Equipment.
Industrial Automation and Motion Control
The XC7Z035-1FFG900C fits industrial controllers that require deterministic I/O handling alongside a capable embedded processor. Its dual Arm Cortex-A9 cores can execute control software, diagnostics, communications, and supervisory logic at 667 MHz, while the 275K-cell Kintex-7 fabric can implement timing-critical motion paths, encoder interfaces, pulse processing, or custom fieldbus logic. The 900-FCBGA package exposes 362 I/O according to the product listing, supporting dense board-level integration. Designers should partition deterministic operations into programmable logic while keeping supervisory functions in software, then validate timing against the AMD device characterization and package requirements.
추천
Embedded Vision and Image Processing
The XC7Z035-1FFG900C is suitable for embedded vision systems that need sensor capture, preprocessing, and system control in one programmable device. The Kintex-7 fabric can accelerate parallel pixel operations, thresholding, filtering, or interface conversion, while the dual Cortex-A9 subsystem handles control, image configuration, networking, and application logic. Its 275K logic cells provide substantial parallel-processing capacity without using a separate FPGA link. Board-level implementation must account for the FCBGA-900 escape-routing density, memory-interface integrity, and thermal performance under sustained logic utilization.
추천
Communications and Network Equipment
The XC7Z035-1FFG900C can serve as the central processing element in communication equipment requiring flexible hardware and software partitioning. The Arm subsystem can manage protocol stacks, management planes, and control services, while programmable logic handles packet framing, data-rate conversion, aggregation, or custom physical-layer interfaces. Its 667 MHz processor class and 275K logic cells permit a compact architecture that avoids using a separate processor and FPGA where the Zynq interconnect offers an advantage. Designers must use the official AMD transceiver, memory, and package guidance rather than infer interface capabilities solely from the logic-cell count.
추천
Data Acquisition and Signal Processing
The XC7Z035-1FFG900C fits high-throughput data-acquisition systems because its programmable fabric can execute parallel sampling, filtering, correlation, and buffering logic while the Cortex-A9 cores manage acquisition control, calibration, storage, and communications. The 275K logic cells and 362 listed I/O permit substantial integration in a single surface-mount device. For best results, place the parallel datapath in the FPGA fabric, use the processor for configuration and supervisory tasks, and separate analog input conditioning from the digital implementation. Memory topology, clock jitter, and high-speed routing must be reviewed against the AMD data sheet.
추천
Secure Embedded Control
The XC7Z035-1FFG900C supports secure embedded-control architectures in which the Arm Cortex-A9 subsystem runs operating-system software and the programmable logic enforces hardware-level timing or interface policies. Functions such as protocol termination, cryptographic acceleration, watchdog enforcement, and safe state control can be implemented close to external interfaces, reducing dependence on software latency. This partition is useful in gateways and secure controllers where the device must combine a conventional processor environment with specialized hardware. Designers should still perform system-level threat analysis, validate boot and update procedures, and isolate critical functions according to the applicable safety and security requirements.
추천
Aerospace and Defense Test Equipment
The XC7Z035-1FFG900C can form the processing core of ruggedized test, telemetry, and electronic warfare equipment when its environmental, qualification, and operating-temperature requirements satisfy the program specification. Its dual-core Arm subsystem can manage control software and telemetry, while the Kintex-7 fabric performs parallel channel processing, waveform generation, or protocol conversion. The device must be treated as a complex mixed-signal system: power sequencing, derating, radiation or environmental requirements, and long-term component sourcing may be more important than nominal processor speed. Obtain exact ordering details and qualification records before including the C-suffix part in a controlled program.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7Z035-1FFG900C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z035-1FFG900I | XC7Z035-2FFG900I | XC7Z035-L2FFG900I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 900-FCBGA (31 mm x 31 mm) | 900-FCBGA (31 mm x 31 mm) | 900-FCBGA (31 mm x 31 mm) | 900-FCBGA (31 mm x 31 mm) |
| Processor Core | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 275K logic cells | 275K logic cells | 275K logic cells | 275K logic cells |
| Ordering Suffix | C suffix | I suffix | I suffix | L2I suffix |
| SoC Architecture | Zynq-7000 first-generation architecture | Zynq-7000 first-generation architecture | Zynq-7000 first-generation architecture | Zynq-7000 first-generation architecture |
주요 차별점
- Matches the processor speed class and logic capacity of the target (vs XC7Z035-1FFG900I)
- Provides higher processor performance in the same footprint (vs XC7Z035-L2FFG900I)
- Combines hard-processor and programmable-logic resources (vs Generic FPGA alternatives)
설계 노트
Use the official AMD FFG900 pinout and package-placement documentation before routing the PCB. A 900-ball FCBGA requires a qualified multilayer stack-up, dense via escaping, and controlled pad geometry. Confirm ball assignments, power and ground balls, configuration pins, high-speed transceiver pins, and external-memory routing directly from the device documentation; do not derive the layout from the FFG676 package.
Plan the XC7Z035 power tree from the official power-supply requirements and board-level current budget. Separate the processor and FPGA supply domains where the device documentation specifies distinct rails, provide local high-frequency decoupling at every supply ball group, and keep switching-regulator layout away from sensitive memory and transceiver routing. Review inrush, startup sequencing, and load-transient margins across the complete operating-temperature range.
Thermal design must account for both processor activity and dense FPGA utilization because power dissipation can vary substantially with workload. Use the package thermal model and board assumptions appropriate to the selected PCB stack-up, provide uninterrupted copper wherever permitted, and evaluate the enclosure with realistic airflow. Validate the hottest operating case rather than relying on typical processor activity or logic utilization figures.
Route external-memory and high-speed transceiver interfaces with the topology, impedance, and spacing rules specified by AMD. A mismatch between the PCB stack-up and device escape routing can degrade edge quality even when nominal logic timing passes. Incorporate length compensation, return-path continuity, reference-plane transitions, and package-ball effects into pre-layout and post-route simulation.
규정 준수 정보
Compliance status is unknown because no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the product data. Confirm current compliance and qualification documents for the exact ordering suffix before production release.