XCKU5P-L1SFVB784I - Kintex UltraScale+ FPGA | AMD
MPN: XCKU5P-L1SFVB784I ✓ فعالXCKU5P-L1SFVB784I نمای کلی
A field-programmable gate array is a semiconductor device whose digital logic, memory, and I/O resources can be configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable input/output, and dedicated clocking resources on one device. The Kintex UltraScale+ family is AMD/Xilinx's FinFET-based FPGA portfolio for high-end processing, memory-interface, networking, and signal-processing designs.
The target device provides 216,960 reported blocks alongside 474,600 logic cells. Its 41,984,000-bit block RAM supports data buffering, packet handling, storage interfaces, and general-purpose on-chip memory. A total of 304 user I/O gives a board designer access to substantial parallel connectivity. The package is the surface-mount 784-FCBGA, also described by listings as a 784-BFBGA/FCBGA configuration.
The L1 suffix identifies the low-power-oriented -1 speed family rather than the highest-performance -2 grade. Its configurable core supply range is 0.698 V to 0.876 V. The -1 and -1L families are intended to balance attainable performance against static power, making the L1 option appropriate when energy efficiency matters as much as general UltraScale+ capability. Exact timing, power, transceiver, and absolute-maximum ratings must be taken from the AMD device documentation for the selected operating mode.
Typical implementation areas include industrial automation, high-speed networking, test and measurement, embedded processing, accelerator logic, and communication infrastructure. The large logic and memory resources allow multiple pipelines, protocol controllers, packet buffers, and control processors to share one programmable device. Designers can also connect high-speed memory and transceiver-based interfaces according to the pinout and bank constraints applicable to the 784-FCBGA package.
Board integration requires careful attention to ball assignment, power sequencing, decoupling, and thermal performance. Use the AMD package pinout files and UG575 when assigning PCB tracks and power domains. Place decoupling capacitors close to their designated supply balls, keep high-speed routes short and reference-controlled, and validate signal integrity and device temperature across every operating condition.
This product page combines the exact XCKU5P-L1SFVB784I identity, core resource counts, package information, confirmed same-package alternatives, and practical implementation guidance. It is intended to help engineers evaluate FPGA capacity, replacement options, thermal limits, and board-level integration without treating general Kintex UltraScale+ features as unverified device-specific guarantees.
جایگزینهای drop-in برای XCKU5P-L1SFVB784I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XCKU5P-L1SFVB784I (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Package, Logic Cells, Manufacturer, User I/O.
XCKU5P-1SFVB784I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU5P-1SFVB784E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
XCKU5P-L1SFVB784E
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XCKU5P-L1SFVB784I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Kintex UltraScale+ FPGA |
| Logic Cells | 474,600 logic cells |
| LABs/CLBs | 27,120 LABs/CLBs |
| Reported Block Count | 216,960 blocks |
| Block RAM | 41,984,000 bits |
| User I/O | 304 user I/O |
| بستهبندی | 784-FCBGA |
| Package Type | Surface-mount FCBGA |
| Core Supply Voltage Range | 0.698 V to 0.876 V |
| Junction Temperature Range | -40°C to 100°C |
| Speed Designation | L1 |
| FPGA Architecture | Kintex UltraScale+ |
| Process Technology | FinFET |
| نوع نصب | Surface Mount |
| Programmable Logic Resources | 474,600 cells |
| Datasheet Package Designation | 784-BFBGA/FCBGA |
راهنمای پیکربندی پین XCKU5P-L1SFVB784I 784-bfbga/fcbga
پیکربندی پین برای XCKU5P-L1SFVB784I (پکیج 784-bfbga/fcbga). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XCKU5P-L1SFVB784I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XCKU5P-L1SFVB784I مناسب است برای 6 کاربردs: Industrial Automation Controllers, High-Speed Network Data Paths, Test and Measurement Systems, High-Performance Embedded Processing, Aerospace and Defense Control Logic, Signal Processing and Acceleration.
Industrial Automation Controllers
The XCKU5P-L1SFVB784I fits industrial automation controllers that combine machine I/O, sequencing logic, communications, and local diagnostics in one programmable device. Its 304 user I/O provides substantial board-level connectivity, while 474,600 logic cells and 27,120 LABs/CLBs can host motion logic, interlocks, protocol controllers, and supervisory state machines. The 41,984,000 bits of block RAM are useful for buffering machine data and coordinating multiple data paths. Its -40°C to 100°C junction-temperature specification supports industrial planning, although enclosure temperature, power dissipation, and safety qualification must be evaluated separately.
پیشنهادی
High-Speed Network Data Paths
The XCKU5P-L1SFVB784I is suitable for network data-path designs that require parallel packet processing, buffering, and configurable control logic. Its 27,120 LABs/CLBs can support multiple header parsers, queues, traffic classifiers, and test functions, while 41,984,000 bits of block RAM can support fixed packet buffers and timing constraints. The 304 user I/O allows high-bandwidth fabric interfacing when board-level routing budgets permit. Engineers should use the AMD UltraScale package pinout files to determine which high-speed I/O and clock resources are available in the selected 784-FCBGA package.
پیشنهادی
Test and Measurement Systems
The XCKU5P-L1SFVB784I can implement parallel acquisition, digital signal processing, pattern generation, and control in an FPGA-based test system. The 474,600 logic cells provide substantial parallelism for filters, correlators, serialization logic, and protocol engines, while the 41,984,000-bit block RAM supports sample storage and waveform buffers. Its 304 user I/O supports extensive parallel instrument connections and control channels. Board designers should separate sensitive measurement paths from power-distribution and high-speed switching currents, and should validate timing closure against the selected AMD device speed grade and operating conditions.
پیشنهادی
High-Performance Embedded Processing
The XCKU5P-L1SFVB784I supports embedded-processing architectures that need programmable hardware acceleration alongside control logic. Dedicated processing pipelines can use the 474,600 available logic cells and 27,120 LABs/CLBs, while block RAM supplies on-chip data storage for pipelines, look-up structures, and local buffers. The device's 304 user I/O permits integration with sensors, memory, external processors, and industrial peripherals. The L1 designation is relevant when power efficiency is important, but engineers should use AMD's documented timing and power tools to compare it against the standard -1 device for the exact clocking and utilization plan.
پیشنهادی
Aerospace and Defense Control Logic
The XCKU5P-L1SFVB784I can serve as the programmable element in aerospace, defense, and rugged embedded systems requiring extensive parallel logic and deterministic board-level interfaces. The 304 user I/O, 27,120 LABs/CLBs, and 41,984,000 bits of block RAM support guidance, telemetry, sensor fusion preprocessing, and redundant control functions. The -40°C to 100°C junction-temperature range is a device specification rather than an unqualified environmental approval. Program qualification, radiation-tolerance status, long-term supply conditions, and application-specific safety requirements must be confirmed separately before use in a flight or mission-critical program.
پیشنهادی
Signal Processing and Acceleration
The XCKU5P-L1SFVB784I is well suited to fixed-function signal processing implemented as parallel FPGA pipelines. The 474,600 logic cells can be divided among filters, FFT stages, correlation engines, decimators, and digital control, while 41,984,000 bits of block RAM accommodate coefficient storage, sample windows, and channel buffers. Its 304 user I/O enables parallel data input and output or serialized interfaces when supported by the selected I/O resources. The L1 power-oriented family can be attractive for thermally constrained systems, but final power dissipation depends on logic utilization, clock frequency, I/O activity, and the exact voltage selected.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XCKU5P-L1SFVB784I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XCKU5P-1SFVB784I | XCKU5P-1SFVB784E | XCKU5P-L1SFVB784E |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 784-FCBGA | 784-FCBGA | 784-FCBGA | 784-FCBGA |
| Speed Designation | L1 | -1 | -1 | L1 |
| Temperature Suffix | I | I | E | E |
تفاوتهای کلیدی
- L1 low-power-oriented speed designation with full Kintex UltraScale+ capacity (در مقابلXCKU5P-1SFVB784I)
- Identical listed resource capacity and package footprint (در مقابلXCKU5P-1SFVB784E)
- Preserves the L1 designation when changing temperature-order suffix (در مقابلXCKU5P-L1SFVB784E)
یادداشتهای طراحی
Use the AMD 784-FCBGA package pinout and land-pattern documentation before routing the board. Place the required power and ground decoupling networks directly at their assigned package balls, keep the return path beneath high-speed signals, and preserve the package's thermal-via requirements. Because the device has 304 user I/O, validate every external trace against the selected bank voltage and signal type.
The configurable core supply range is 0.698 V to 0.876 V, but the correct operating point depends on the selected AMD device mode and design constraints. Review the power architecture, regulator tolerance, sequencing requirements, decoupling, and power-current limits in the manufacturer documentation. Do not assign the same regulator settings to L1 and standard -1 variants without verifying their operating characteristics.
Estimate junction temperature from actual logic utilization, clocking, I/O activity, core voltage, and ambient temperature rather than relying only on device capacity. The specified -40°C to 100°C junction range is an absolute device boundary, not a design target. Use the package thermal data, board copper, airflow assumptions, and AMD power estimation tools to establish adequate thermal margin.
Do not treat a matching 784-FCBGA footprint as sufficient proof of interchangeability. Speed-grade, temperature-grade, voltage-mode, timing, and design-tool compatibility can still prevent a valid replacement. Confirm the exact ordering code and migrate the AMD project settings before authorizing a same-package substitute, especially when a design has timing margin close to its limit.
اطلاعات انطباق
No device-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified. The product's industrial application listing does not by itself establish AEC-Q100 qualification.