Infineon

XMC1100-T016X0064AAXUMA1 - 32MHz Cortex-M0 64KB MCU | Infineon

MPN: XMC1100-T016X0064AAXUMA1 ✗ پایان تولید
PG-TSSOP-16-8, 16 pins Package 32 MHz Speed 64 KB Memory
حداقل سفارش: 1 |

XMC1100-T016X0064AAXUMA1 نمای کلی

Infineon Technologies XMC1100-T016X0064AAXUMA1 is a 32-bit Arm Cortex-M0 microcontroller operating at 32 MHz, with 64 KB of flash memory and a 16-pin PG-TSSOP-16-8 package. It is designed for general-purpose industrial and consumer applications where an efficient 32-bit MCU, compact footprint, and embedded analog control are useful in the same device.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface circuitry into one component. The XMC1100 belongs to the XMC1000 family of Cortex-M0 microcontrollers, a low-complexity branch of 32-bit embedded processing. This family targets entry-level industrial and consumer designs and can support cost-sensitive replacements for conventional 8-bit and 16-bit microcontroller systems.

The target device combines a 32 MHz Arm Cortex-M0 core with 64 KB of flash and a six-channel ADC. Its 32-bit architecture supports efficient handling of firmware, control loops, communications, and general-purpose peripheral tasks while retaining a compact 16-pin package. The six-channel ADC provides multiple analog input paths for sensing applications, allowing several physical measurements to be handled by one microcontroller rather than requiring separate analog front-end devices.

The XMC1100 series is positioned for applications that require basic embedded control without the memory and peripheral complexity of a higher-end microcontroller. Its operating concept combines deterministic embedded execution with integrated analog acquisition and serial peripherals. The 64 KB flash configuration also leaves a defined code-storage footprint for compact control firmware, bootloader functions, and application-specific routines.

Typical uses include industrial sensor modules, compact motor-control nodes, small appliance controllers, building equipment, communication peripherals, and consumer products that need several analog inputs. The part is especially relevant where board area is constrained but a 16-pin package can still provide access to the required digital and analog signals. A suitable application should map every required signal, peripheral, power rail, and programming interface to the available TSSOP-16 footprint before design release.

The principal design consideration is pin-budget allocation. In a 16-pin package, power pins, ground connections, clocking, programming, reset, and communication signals can constrain the number of application I/O pins. Place the decoupling capacitors adjacent to their supply pins, route programming and debug access for reliable field updates, and confirm signal directions and analog limits against the manufacturer pin-description table before laying out the PCB.

This page consolidates the XMC1100 device identity, verified manufacturer documentation, package information, replacement options, and practical design guidance. It also distinguishes exact memory configurations and silicon-step options so engineers can evaluate drop-in choices without confusing a lower-memory variant or a different revision with an equivalent 64 KB AA-step device.

جایگزین‌های drop-in برای XMC1100-T016X0064AAXUMA1 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XMC1100-T016X0064AAXUMA1 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, Package, Architecture, Core, Supply Voltage.

Infineon
Flash Memory: 64 KB (64K x 8)
Package: PG-TSSOP-16-8
Architecture: 32-bit RISC
مقایسه با XMC1100-T016X0064AAXUMA1 →
Infineon
Flash Memory: 64 KB (64K x 8)
Core: ARM Cortex-M0, 32-bit RISC
Supply Voltage: 3.3 V or 5 V
مقایسه با XMC1100-T016X0064AAXUMA1 →

XMC1100T016X0064ABXUMA1

✅ جایگزین مستقیم
Infineon
📦 PG-TSSOP-16-8
ARM Cortex-M0, 32-bit RISC · 32 MHz · 64 KB (64K x 8) · 16 KB · 3.3 V or 5 V · 12-bit ADC, 8 channels · UART/USART, SPI, I2C · Multi-channel 16-bit timers with PWM output

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XMC1100-T016F0064-AB

✅ جایگزین مستقیم
📦 PG-TSSOP-16-8
AB silicon step replaces AA step; core remains 32 MHz and flash remains 64 KB, with no stated memory or frequency difference

📋 جایگزین مرجع (خارج از کاتالوگ)

XMC1100T016F0064ABXUMA1

✅ جایگزین مستقیم
Infineon
📦 PG-TSSOP-16-8
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 32 MHz · 64 KB (64K x 8) · 16 KB · 32-bit RISC · XMC1000 · XMC1100-T016F0064-AB

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XMC1100-T016F0016AAXUMA1

✅ جایگزین مستقیم
📦 PG-TSSOP-16-8
Flash decreases from 64 KB to 16 KB, a 75% reduction; core frequency remains 32 MHz and the TSSOP-16 footprint is retained

📋 جایگزین مرجع (خارج از کاتالوگ)

XMC1100-T016F0064AAXUMA1

✅ جایگزین مستقیم
📦 PG-TSSOP-16-8
Uses the F configuration rather than the X configuration while retaining the 32 MHz Cortex-M0 core and 64 KB flash in the same TSSOP-16 package

📋 جایگزین مرجع (خارج از کاتالوگ)

XMC1100-T016X0064AAXUMA1 حداکثر مقادیر مجاز و مشخصات الکتریکی

Processor Core Arm Cortex-M0
CPU Frequency 32 MHz
Architecture 32-bit
Core Count 1 core
Flash Memory 64 KB
Flash Organization 64K x 8 bits
ADC Channel Count 6 channels
بسته‌بندی PG-TSSOP-16-8, 16 pins
نوع نصب Surface mount

راهنمای پیکربندی پین XMC1100-T016X0064AAXUMA1 pg-tssop-16-8, 16 pins

پیکربندی پین برای XMC1100-T016X0064AAXUMA1 (پکیج pg-tssop-16-8, 16 pins). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج pg-tssop-16-8, 16 pins برای XMC1100-T016X0064AAXUMA1

داده پین‌آوت تفصیلی موجود نیست برای XMC1100-T016X0064AAXUMA1.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XMC1100-T016X0064AAXUMA1 مناسب است برای 6 کاربردs: Industrial Sensor Module, Compact Motor Control Node, Building Equipment Controller, Small Appliance Controller, Communication Peripheral, Consumer Control Product.

🏭

Industrial Sensor Module

The XMC1100-T016X0064AAXUMA1 fits compact industrial sensor modules because it combines a 32-bit Cortex-M0 core, 64 KB of flash, and a six-channel ADC in a 16-pin package. The ADC can acquire multiple analog sensor signals while local firmware performs filtering, thresholding, compensation, and digital communication. Placing the MCU close to the sensors reduces wiring complexity and helps keep the analog path compact. The design must allocate pins carefully because the TSSOP-16 package also requires power, ground, programming, and clock functions. Verify the analog input limits and pin assignments in the manufacturer datasheet, and provide local filtering close to each sensor input to preserve signal quality.

⚡

Compact Motor Control Node

The XMC1100-T016X0064AAXUMA1 is appropriate for a small motor-control or actuator node that benefits from 32-bit processing without requiring a larger microcontroller package. Its 32 MHz Cortex-M0 core can execute position, speed, or duty-cycle control routines, while the six-channel ADC can monitor command inputs or analog feedback conditions. The 64 KB flash accommodates local control firmware and calibration logic. Because the device has only 16 pins, external drivers may be required for power switching, level translation, or high-current output. Keep high-current or fast-switching paths away from sensitive analog inputs, and confirm timer outputs and alternate-function mappings against the pin-description table.

🏠

Building Equipment Controller

The XMC1100-T016X0064AAXUMA1 can serve as the controller in a compact building-equipment module such as a sensor, actuator, or local supervisory node. The 32-bit Cortex-M0 core supports event handling and communication firmware, while 64 KB of flash provides space for application logic and field-update functions. The six-channel ADC is useful when the equipment exposes several analog measurements through a common connector. A practical design should isolate field-wired inputs from the microcontroller through appropriate protection, maintain predictable grounding between sensor and power domains, and account for temperature and supply variations. Confirm electrical limits, reset behavior, and communication assignments from the Infineon manufacturer datasheet before production release.

🔧

Small Appliance Controller

The XMC1100-T016X0064AAXUMA1 suits small appliance controllers where a compact package, local flash, and analog measurement capability are needed. A 32 MHz Cortex-M0 core can handle motor timing, button logic, sensor evaluation, and communication tasks in one device, while the six-channel ADC supports temperature, level, or feedback measurements. The 64 KB flash configuration allows a more capable application program than the 16 KB XMC1100 option. Designers should identify which loads require external transistors or drivers and keep switching nodes away from analog traces. Use the manufacturer pin table to validate functions after routing, and review startup, reset, and brownout requirements for appliance mains-related modules.

🌐

Communication Peripheral

The XMC1100-T016X0064AAXUMA1 can be used in a small communication peripheral or protocol adapter where local framing, configuration, and status handling are required. Its 32-bit Cortex-M0 architecture provides a straightforward execution environment for packet processing, while 64 KB of flash supports protocol firmware and a bootloader. The six-channel ADC can also monitor a supply rail or external analog condition when the design requires telemetry. Serial-interface pins, programming access, and supply pins must be prioritized when selecting the package because alternate-function multiplexing can limit available I/O. Confirm the supported interface set and electrical characteristics in the manufacturer datasheet, and provide a stable clock and decoupling arrangement for reliable communication timing.

📱

Consumer Control Product

The XMC1100-T016X0064AAXUMA1 is suitable for compact consumer products that need programmable control, local storage, and limited analog sensing. The XMC1000 family targets general-purpose consumer as well as industrial applications, and this ordering option provides 64 KB of flash in a small TSSOP-16 package. Typical products include accessory controllers, compact timers, and simple condition-monitoring products. The implementation should minimize external components where practical, but decoupling and signal conditioning remain necessary for stable operation. Confirm package pin directions and exposed alternate functions, provide accessible programming or recovery provisions for production, and verify EMC behavior in the final enclosure because cable or connector transitions can disturb sensitive ADC measurements.

خلاصه محصولات پیشنهادی

XMC1100-T016F0064-AB Same-package 64 KB XMC1100 family option استفاده‌شده در: Industrial Sensor Module STM8S103F2P6TR Compact embedded-control alternative for non-Arm designs استفاده‌شده در: Industrial Sensor Module XMC1100T016X0064ABXUMA1 Infineon استفاده‌شده در: Compact Motor Control Node STM32G031C8T6TR Alternative microcontroller family for designs requiring expanded resources استفاده‌شده در: Compact Motor Control Node XMC1100-T016F0064AAXUMA1 Same-family 64 KB control option استفاده‌شده در: Building Equipment Controller EFM32ZG110F4-B-QFN24R Silicon Labs استفاده‌شده در: Building Equipment Controller XMC1100-T016F0016AAXUMA1 Lower-flash option for simple control firmware استفاده‌شده در: Small Appliance Controller STM8S105C4T6TR STMicroelectronics استفاده‌شده در: Small Appliance Controller XMC1100T016F0064ABXUMA1 Infineon استفاده‌شده در: Communication Peripheral MC9S08SH16CWL NXP Semiconductors استفاده‌شده در: Communication Peripheral XMC1100-T016X0064AAXUMA1 Infineon استفاده‌شده در: Consumer Control Product ATMEGA8U2-AUR Microchip Technology استفاده‌شده در: Consumer Control Product
What are the key specifications of XMC1100-T016X0064AAXUMA1 that engineers should know?
The XMC1100-T016X0064AAXUMA1 is a 32 MHz, 32-bit Arm Cortex-M0 microcontroller with 64 KB of flash, a six-channel ADC, and a 16-pin PG-TSSOP-16-8 package. According to the Infineon XMC1100 datasheet, the device is a general-purpose member of the XMC1000 family designed for industrial and consumer embedded applications. Its compact package, 32-bit core, and integrated analog conversion make it useful for compact control and sensing systems.
What is the XMC1100-T016X0064AAXUMA1 used for?
The XMC1100-T016X0064AAXUMA1 is used for compact embedded control, analog sensing, motor-control nodes, appliance controllers, and low-cost industrial systems. The Infineon manufacturer datasheet identifies the XMC1100 as a general-purpose Cortex-M0 device, while its 64 KB flash and six-channel ADC support local firmware and multi-sensor acquisition. It is suitable when a 16-pin surface-mount MCU provides sufficient control and communication resources.
Where can I download the XMC1100 datasheet PDF?
The official XMC1100 datasheet PDF is available from the Infineon document link on this page. The document describes the XMC1100 series ordering information, electrical characteristics, physical characteristics, and features that apply to the XMC1000 family. Engineers should also consult the AA-step reference manual for detailed register-level behavior before finalizing firmware and peripheral configuration.
Where can I find the XMC1100-T016X0064AAXUMA1 pinout?
The XMC1100-T016X0064AAXUMA1 pinout is documented in the pin-description table of the Infineon XMC1100 manufacturer datasheet. The device uses a 16-pin PG-TSSOP-16-8 package, but signal assignments, analog inputs, power pins, ground pins, and alternate functions must be read from that table rather than inferred from the package alone. The same table should be used when assigning PCB nets and checking programming access.
What is the difference between XMC1100-T016X0064AAXUMA1 and XMC1100-T016F0064AAXUMA1?
Both devices use the XMC1100-T016 16-pin configuration and an Arm Cortex-M0 core, but their flash capacities differ. The target XMC1100-T016X0064AAXUMA1 has 64 KB of flash, while XMC1100-T016F0016AAXUMA1 has 16 KB, a 75% reduction. The lower-memory device can therefore be considered only when existing firmware fits within 16 KB and all pin functions remain unchanged.
Can XMC1100T016X0064ABXUMA1 replace XMC1100-T016X0064AAXUMA1?
The XMC1100T016X0064ABXUMA1 can be a candidate drop-in replacement because it retains the 32 MHz Cortex-M0 core, 64 KB flash, and PG-TSSOP-16-8 package. The principal difference is the AB silicon step rather than memory size or package. Confirm the ordering-code definitions, pin table, electrical limits, firmware support, and application qualification before using it as a like-for-like substitution.
When should I choose XMC1100-T016X0064AAXUMA1 over a lower-memory XMC1100 variant?
Choose the XMC1100-T016X0064AAXUMA1 when firmware and working data require more memory than a 16 KB XMC1100 configuration can provide. Its 64 KB flash is four times the capacity of the 16 KB XMC1100-T016F0016AAXUMA1. The target retains the same 16-pin device family, so it is preferable when 64 KB of code storage is valuable but a larger package or faster processor is unnecessary.
Is XMC1100-T016X0064AAXUMA1 suitable for an industrial sensor module?
The XMC1100-T016X0064AAXUMA1 is suitable for an industrial sensor module when the design requires a 32-bit Cortex-M0 core, 64 KB of flash, and multiple analog inputs. Its six-channel ADC is useful for sensor aggregation, while the 16-pin package supports compact assemblies. The Infineon manufacturer datasheet supports its use in general-purpose industrial applications, subject to environmental and electrical limits.
What can replace XMC1100-T016X0064AAXUMA1?
The closest verified replacements are same-package XMC1100 devices with the same 32 MHz Cortex-M0 architecture and 64 KB flash, including the AB-step ordering variants. A lower-memory 16 KB XMC1100 part is only suitable if firmware fits and the package pins match. No cross-brand drop-in equivalent is established here, so changing manufacturers requires a complete pin, clock, peripheral, and firmware review.
What is the best Infineon equivalent for XMC1100-T016X0064AAXUMA1?
The best Infineon equivalent is a 64 KB XMC1100-T016 variant using the same PG-TSSOP-16-8 footprint and operating at 32 MHz. XMC1100T016X0064ABXUMA1 is the closest option because it changes the silicon step while retaining the stated core, frequency, memory, and package. Confirm device-step-specific behavior and product status before approving it for new production.
How much current does the XMC1100-T016X0064AAXUMA1 consume?
The operating and sleep currents for XMC1100-T016X0064AAXUMA1 must be taken from the electrical-characteristics tables in the Infineon manufacturer datasheet because the device has several clock, peripheral, and low-power operating states. Design the supply around the worst-case active current, I/O loading, ADC use, and temperature rather than a single nominal current value. The 32 MHz core frequency is confirmed, but current figures were not established.
Does the XMC1100-T016X0064AAXUMA1 support automotive AEC-Q100 qualification?
The XMC1100-T016X0064AAXUMA1 should not be treated as AEC-Q100 qualified unless Infineon explicitly identifies that exact ordering code as qualified. The device is positioned for general-purpose industrial and consumer applications, and the manufacturer datasheet is the controlling document for qualification and environmental claims. For an automotive design, request the exact automotive ordering option and its qualification documentation rather than relying on the family name.
Where can I buy XMC1100-T016X0064AAXUMA1 online?
Use the Request a Quote form on this page to request the XMC1100-T016X0064AAXUMA1 with the required package, quantity, date code, and delivery expectations. The form routes the request through XAIPART's component-sourcing workflow without embedding a static price that may become stale. Include the target TSSOP-16 footprint and any required production or automotive qualification details.
What is the lead time for XMC1100-T016X0064AAXUMA1?
The current lead time for XMC1100-T016X0064AAXUMA1 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, production status, date-code requirements, and regional inventory, so a quantity-specific response is more useful than a generic estimate. State the requested delivery quantity and required shipment date when submitting the request.
Is XMC1100-T016X0064AAXUMA1 in stock?
Current stock for XMC1100-T016X0064AAXUMA1 should be confirmed through the Request a Quote form on this page. Include the required order quantity and target date so the sourcing team can return a quantity-specific availability response. The existence of an active manufacturer page does not by itself confirm current inventory, allocation, or shipment readiness.

داده‌های مرجع مهندسی برای XMC1100-T016X0064AAXUMA1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose XMC1100-T016X0064AAXUMA1 when a design needs the exact AA-step XMC1100 configuration with a 32 MHz Arm Cortex-M0 core, 64 KB of flash, a six-channel ADC, and a 16-pin PG-TSSOP-16-8 footprint. Select XMC1100T016X0064ABXUMA1, XMC1100T016F0064ABXUMA1, or XMC1100-T016F0064-AB when the same memory and package are required but an AB silicon step is acceptable after checking device-specific behavior and qualification. Consider XMC1100-T016F0016AAXUMA1 only when 16 KB of flash is enough, because its flash capacity is 75% lower than the target. XMC1100-T016F0064AAXUMA1 is the closest configuration match for same-step boards, provided its ordering-code features are compatible. No cross-brand drop-in replacement is established because clock, peripheral, pin-multiplexing, and software differences make a package-only substitution unsafe.

مقایسه با جایگزین‌ها

پارامتر این محصول XMC1100T016X0064ABXUMA1 XMC1100-T016F0064-AB XMC1100T016F0064ABXUMA1 XMC1100-T016F0016AAXUMA1 XMC1100-T016F0064AAXUMA1
Package PG-TSSOP-16-8, 16 pins PG-TSSOP-16-8, 16 pins PG-TSSOP-16-8, 16 pins PG-TSSOP-16-8, 16 pins PG-TSSOP-16-8, 16 pins PG-TSSOP-16-8, 16 pins
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Processor Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 16 KB 64 KB
Architecture 32-bit single-core 32-bit Cortex-M0 32-bit Cortex-M0 32-bit Cortex-M0 32-bit Cortex-M0 32-bit Cortex-M0
Silicon Step AA step AB step AB step AB step AA step AA step
Ordering Configuration T016X0064AAXUMA1 T016X0064ABXUMA1 T016F0064-AB T016F0064ABXUMA1 T016F0016AAXUMA1 T016F0064AAXUMA1
Special Features General-purpose XMC1100 with 64 KB flash General-purpose XMC1100 with 64 KB flash General-purpose XMC1100 with 64 KB flash General-purpose XMC1100 with 64 KB flash General-purpose XMC1100 with 16 KB flash General-purpose XMC1100 with 64 KB flash

تفاوت‌های کلیدی

  • Full 64 KB flash in the same 16-pin footprint (در مقابلXMC1100-T016F0016AAXUMA1)
  • Direct AA-step family configuration (در مقابلXMC1100T016X0064ABXUMA1)
  • Six-channel analog acquisition in a compact package (در مقابلXMC1100-T016F0016AAXUMA1)

یادداشت‌های طراحی

Allocate the 16 pins before committing to the schematic. Power, ground, reset, programming access, clocking, communications, and six-channel ADC demand can leave fewer application I/O pins than the package count suggests. Cross-check alternate functions in the manufacturer pin-description table, keep debug or programming access reachable for production, and verify that every selected alternate function does not conflict with an ADC or communication channel.

Place the required supply decoupling capacitors as close as practical to the corresponding device pins, with the shortest possible supply and ground paths. Use the manufacturer datasheet to determine the exact capacitor values, tolerances, voltage ratings, and power-up sequence. Do not infer a single capacitor value from generic MCU practice, because the datasheet may distinguish core, analog, and external supply requirements.

Keep analog sensor inputs away from switching nodes, high-current outputs, and clock traces. Route the ADC input path directly to the MCU pin through the intended analog network, avoid sharing narrow return paths with noisy loads, and provide a quiet ground reference where the application permits. The six-channel ADC makes input multiplexing and pin assignment important, so verify each analog channel against its alternate-function limitations.

Do not treat an ordering-code variant as interchangeable solely because it uses the same package. Confirm memory capacity, silicon step, temperature rating, qualification status, and orderable package code for every replacement. In particular, XMC1100-T016F0016AAXUMA1 has 16 KB rather than 64 KB of flash, while AB-step options require a review of device-specific documentation and firmware support.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Exact compliance declarations and automotive qualification must be confirmed for the specific ordering code with Infineon. General family positioning does not establish qualification for XMC1100-T016X0064AAXUMA1.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

xmc1100 boot kit xmc1100 datasheet xmc1100 reference manual xmc1100 for arduino xmc1100 infineon xmc1100 xmc2go xmc1100 board xmc1100 pinout XMC1100-T016X0064AAXUMA1 datasheet XMC1100-T016X0064AAXUMA1 pinout XMC1100-T016X0064AAXUMA1 equivalent XMC1100-T016X0064AAXUMA1 replacement

قطعات و اصطلاحات مرتبط

Infineon Technologies XMC1100-T016X0064AAXUMA1 XMC1100T016X0064ABXUMA1 XMC1100-T016F0064-AB XMC1100T016F0064ABXUMA1 XMC1100-T016F0016AAXUMA1 XMC1100-T016F0064AAXUMA1 XMC1100 XMC1000 Arm Cortex-M0 microcontroller MCU embedded processor system-on-chip industrial microcontroller consumer microcontroller 32-bit architecture 64 KB flash memory six-channel ADC analog-to-digital converter PG-TSSOP-16-8 TSSOP-16 surface-mount package XMC2GO Arduino general-purpose control industrial sensor module
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ