Circuits intégrés

PIC32MX775F512LT-80I/PT

PIC32MX775F512LT-80I/PT - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX775F512LT-80I/PT is a 32-bit MIPS M4K microcontroller running up to 80 MHz with 512 KB Flash and 128 KB SRAM in a 100-pin TQFP (12x12 mm) industrial-grade package. It integrates a 10/100 Mbit Ethernet MAC, USB 2.0 OTG full-speed, two CAN 2.0b controllers, and a rich peripheral set including 16-bit parallel master port for external graphics or memory expansion. The device targets industrial 32-bit embedded designs that need multi-protocol connectivity in a single chip. A PIC32MX7xx microcontroller belongs to the MIPS32 M4K family of 32-bit RISC microcontrollers, a tier above the 8-bit PIC16/PIC18 families and below the Cortex-M class in code density. PIC32MX parts combine a 5-stage pipeline MIPS core with Microchip peripheral IP, MPLAB X IDE support, and Harmony/MLA firmware libraries. Within Microchip's PIC32 portfolio, the MX5/6/7 sub-families are differentiated by peripheral mix: MX5 lacks USB, MX6 adds USB, and MX7 adds Ethernet plus dual CAN plus parallel master port - making the MX7 the highest-integration variant of the original PIC32MX generation. Key specifications include 1.56 DMIPS/MHz core performance, hardware Multiply/Divide unit, 16-channel 10-bit ADC at up to 1 Msps, 5 compare/PWM output modules, 5 timer/counters, four UART, two SPI, and two I2C. Internal oscillator blocks reduce BOM by allowing operation without an external crystal. The device supports industrial -40C to +85C operation, and the "80" speed grade pins maximum CPU frequency at 80 MHz. Architecture depth: the PIC32MX7xx uses a Harvard-style bus with separate instruction and data paths into the Flash controller, allowing simultaneous fetch and read. The Ethernet MAC includes an MII/RMII interface that requires an external PHY (such as the Microchip LAN8720A or DP83848), and the USB OTG controller requires an external PHY or direct bus-powered device connection. The 16-bit PMP can interface to graphics controllers, external SRAM, or FPGA registers without an external bus bridge. Typical applications include industrial Ethernet-connected sensor nodes, CAN-bridged HVAC controllers, USB device or embedded-host appliances, and HMI panels driving external TFT panels via PMP. Designers use PIC32MX775F512L parts whenever full-speed Ethernet, dual CAN, and USB must coexist with deterministic interrupt response. Design tip: dedicate separate PCB layers to the Ethernet MII/USB differential pair to meet EMI/ESD targets; place the 32.768 kHz secondary oscillator crystal close to SOSC pins if using RTCC. The PT suffix indicates a 100-pin TQFP industrial-temperature variant supplied in tape and reel. This page synthesizes distributor pricing snapshots, drop-in Microchip same-family alternatives, design considerations, and pin-compatibility data not consolidated on the manufacturer datasheet or distributor product pages.

USD $7,05 En stock

PIC32MX775F512LT-80V/BG

PIC32MX775F512LT-80V/BG - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512LT-80V/BG is a 32-bit MIPS M4K microcontroller operating at up to 80 MHz, integrating 512 KB of Flash program memory and 64 KB of SRAM, housed in a 121-ball TFBGA (10x10 mm) package. The 'LT' suffix indicates tape-and-reel packaging and the 'V' temperature grade denotes -40C to +105C operation, while the '80' suffix marks the 80 MHz maximum clock. This part belongs to the PIC32MX5/6/7 family, which is purpose-built for embedded connectivity. A 32-bit microcontroller (MCU) is a single-chip computer that combines a high-performance processor core, on-chip program and data memory, and a rich peripheral set. In the system hierarchy, MCUs sit between simple microcontrollers (8/16-bit) and application processors, trading some processing power for deterministic real-time behavior and ultra-low power budgets. The MIPS M4K core in this device implements the industry-standard MIPS32 instruction set with hardware multiply/divide and single-cycle bit manipulation, making it well-suited to communications stacks that need both throughput and bit-level I/O. Key features of the PIC32MX775F512LT-80V/BG include an integrated 10/100 Mbit Ethernet MAC for wired networking, two CAN 2.0B controllers for industrial or automotive buses, USB 2.0 On-The-Go (OTG) with integrated PHY, five UART channels, three SPI and four I2C peripherals, a 16-channel 10-bit ADC with 1 Msps conversion rate, five 16-bit timers/counters and five capture/compare/PWM modules. The device operates from 2.3 V to 3.6 V with 51 general-purpose I/O pins, DMA on most peripherals, and an internal 8 MHz RC oscillator with PLL for flexible clocking. The architecture combines the Harvard-style MIPS M4K core with a multi-layer bus matrix that allows simultaneous DMA-driven peripheral activity and CPU instruction fetches. Code execution is from Flash with single-cycle access from prefetch cache, accelerating loops and interrupt routines. A dedicated DMA controller with 8 channels moves data between peripherals and memory without CPU intervention, offloading packet processing from the core in connected applications. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB HID or CDC device controllers, building automation nodes (BACnet/Modbus TCP), and POS terminals. The combination of Ethernet + dual CAN + USB-OTG on a single die is uncommon and removes the need for external bridge chips. When designing, place 100 nF decoupling on every VDD/VSS pair and a 10 uF bulk capacitor near the VCAP pin; respect the TFBGA 0.8 mm ball pitch with NSMD pads and microvia-in-pad for reliable production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Reviewers should treat specifications as authoritative from the official Microchip datasheet and confirm lead time with authorized distributors before committing to high-volume orders.

USD $11,25 En stock

PIC32MX795F512H-80V/MR

PIC32MX795F512H-80V/MR - 80MHz 32-bit MCU, 512KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC32MX795F512H-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash, 128 KB SRAM, integrated 10/100 Ethernet MAC, USB 2.0 OTG with on-chip PHY, two CAN 2.0b modules, and a 64-pin 9x9 mm VQFN package. It targets high-performance embedded connectivity applications. A PIC32MX microcontroller belongs to the 32-bit MCU family, which sits in the hierarchy: microcontroller -> microprocessor -> integrated circuit -> semiconductor. PIC32 devices combine the throughput of a 32-bit MIPS core with rich connectivity peripherals, fitting between 8/16-bit legacy MCUs and higher-end ARM Cortex-M parts on the price/performance curve. Within Microchip's portfolio, PIC32MX5/6/7 devices are the connectivity-focused sub-family. Key features include a 5-stage Harvard pipeline, 8 dedicated DMA channels for USB OTG, Ethernet, and CAN peripherals, 16-bit parallel master port (PMP) for graphics interfaces, up to 16-channel 10-bit ADC at 1 Msps, five 16-bit timers/counters, and four UART, three SPI, and two I2C serial interfaces. The device supports 2.3 V to 3.6 V single-supply operation and multiple low-power modes (Idle, Sleep, Deep Sleep) with a Fail-Safe Clock Monitor. The architecture combines a deterministic MIPS32 M4K core with a multi-channel DMA controller, allowing Ethernet, USB, and CAN traffic to move data between peripherals and RAM without CPU intervention. 16 KB of boot Flash supports secure firmware updates via USB or UART bootloader, and the dual CAN 2.0b controllers with 1024 message buffers suit industrial CAN-FD-adjacent networks. JTAG and 2-wire ICSP programming are both supported. Typical applications include industrial Ethernet gateways, CAN-bridge controllers for automotive test equipment, USB host/slave embedded devices such as data loggers and POS terminals, graphic HMI panels using PMP-driven LCDs, and HVAC controllers that require Ethernet plus dual CAN connectivity on a single chip. When designing with this part, allocate one DMA channel per active high-bandwidth peripheral and verify the 64-VQFN thermal pad is soldered with sufficient ground vias for thermal dissipation. MPLAB Harmony provides the TCP/IP, USB stack, and graphics libraries for this family. This page synthesizes distributor pricing, drop-in alternatives, and design notes from the Microchip PIC32MX5XX/6XX/7XX family datasheet, not found on a single manufacturer page.

USD $8,92 En stock

PIC32MX795F512H-80V/PT

PIC32MX795F512H-80V/PT - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX795F512H-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash and 128 KB SRAM, integrated USB 2.0 On-The-Go (with PHY), 10/100 Ethernet MAC with MII/RMII, and dual CAN 2.0b modules, housed in a 64-pin TQFP (PT) package. According to the PIC32MX5XX/6XX/7XX family datasheet, the part operates from 2.3V to 3.6V and exposes 51 usable I/O pins, making it one of the highest-integration members of the PIC32MX lineup for connected embedded designs. The '80V' suffix denotes the 80 MHz speed grade with the V industrial temperature range (-40C to +105C); 'PT' indicates the 64-pin TQFP package. An MCU (microcontroller unit) is a single silicon die that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich peripheral set. PIC32MX devices sit in Microchip's 32-bit MCU portfolio between the 16-bit PIC24/dsPIC line and the higher-performance PIC32MZ series. The MX5/6/7 sub-family targets connected applications, and the '7' suffix (MX7xx) specifically denotes the full peripheral mix including USB-OTG + Ethernet + dual CAN, distinguishing it from less-connected MX5/MX6 variants that omit Ethernet or CAN. Key features include 8 dedicated DMA channels (for USB-OTG, Ethernet, and CAN), a 16-bit Parallel Master Port (PMP) for graphics interfaces, two I2C, two SPI, and five UART modules, plus a 16-channel 10-bit ADC at up to 1 Msps. The 5-stage pipelined Harvard architecture delivers the 105 DMIPS throughput. A fail-safe clock monitor and multiple power-management modes (Sleep, Idle, Deep Sleep) suit power-constrained designs. Typical applications include industrial Ethernet gateways, CAN-bus industrial nodes (CANopen/DeviceNet), USB-OTG device and host peripherals, graphic HMI panels, point-of-sale terminals, and IoT edge nodes. The integrated Ethernet MAC plus USB-OTG removes external PHY bridges in many designs. Designers should plan power decoupling (10uF bulk + 0.1uF near each VDD pin), keep 50 ohm single-ended impedance on MII/RMII traces, and configure unused pins as outputs or inputs with pull-downs to minimize Sleep-mode current. This page consolidates distributor pricing, same-brand drop-in alternatives within the PIC32MX family, and practical design notes not aggregated in the manufacturer datasheet.

USD $6,95 En stock

PIC32MX795F512HT-80V/MR

PIC32MX795F512HT-80V/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX795F512HT-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB of Flash and 128 KB of SRAM, integrated USB 2.0 On-The-Go, 10/100 Ethernet MAC, and dual CAN 2.0b controllers, housed in a 64-pin VQFN (9x9 mm) package. Tape-and-reel packaged, the device operates from 2.3 V to 3.6 V and is qualified for -40 °C to +105 °C industrial temperature range. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals on one die. The PIC32MX family uses the MIPS32 M4K core with a 5-stage Harvard pipeline, making it part of the broader microcontroller taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> high-performance connectivity MCU. These connectivity-focused MCUs sit between general-purpose microcontrollers and application processors, optimized for embedded networking and industrial protocols. Key features include 51 general-purpose I/O, 8 dedicated DMA channels servicing USB OTG, Ethernet, and CAN, a 16-bit parallel master port for external graphics or memory, two I2C, two SPI, six UART, and a 10-bit 1 Msps ADC with up to 16 channels. The device also integrates a real-time clock and comparator, and runs Microchip's MPLAB Harmony firmware framework, enabling drivers, middleware, and USB/Ethernet stacks. Architecturally, the M4K core delivers 1.56 DMIPS/MHz, Harvard bus with separate instruction and data paths, and hardware multiply/divide. The Ethernet MAC supports both MII and RMII PHYs, while USB-OTG with integrated PHY removes external transceiver cost. Dual CAN modules with 1024 buffers each suit industrial fieldbus designs. Compared to Cortex-M3/M4 alternatives, the PIC32MX offers stronger connectivity integration but draws more power. Typical applications include industrial Ethernet gateways, CAN-to-Ethernet bridges, USB device/host peripherals, building automation controllers, and embedded web servers. The integrated connectivity reduces BOM cost versus discrete MCU plus external controllers, while MPLAB Harmony accelerates time to market. When designing with this part, prioritize PCB layout for the 64-pin VQFN: use 0.5 mm pitch fan-out, thermal pad with 9+ thermal vias, and follow Microchip's decoupling guidance. Validate USB and Ethernet signal integrity with the reference schematics in the PIC32MX5/6/7XX family datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and embedded engineers a single reference for part selection.

USD $6,21 En stock

PIC32MX795F512HT-80V/PT

PIC32MX795F512HT-80V/PT - 80MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MX795F512HT-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 512 KB of Flash and 128 KB of SRAM, housed in a 64-pin TQFP (PT) package. The 'T' suffix indicates tape-and-reel packaging and the 'V' suffix indicates the -40C to +105C extended industrial temperature grade, while the '80V' marking identifies the 80 MHz core speed and 2.3V to 3.6V operating voltage window. This part is the connectivity-rich flagship of the PIC32MX5/6/7 family, integrating USB 2.0 On-The-Go with PHY, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b controllers, and eight dedicated DMA channels for USB, Ethernet, and CAN peripherals. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash program memory, SRAM data memory, and integrated peripherals such as timers, ADCs, communication controllers, and I/O. PIC32MX MCUs use the MIPS32 M4K Harvard architecture with a 5-stage pipeline, delivering up to 105 DMIPS at 80 MHz. Compared to 8-bit or 16-bit MCUs, a 32-bit core gives substantially more headroom for protocol stacks (TCP/IP, USB, CANopen) and DSP-style math, while remaining simple enough to program in bare-metal or RTOS environments with Microchip's MPLAB Harmony framework. Key features include 512 KB Flash (512K x 8) plus 12 KB auxiliary boot Flash, 128 KB SRAM, 16-channel 10-bit 1 Msps ADC, 51 user I/O pins, five 16-bit timers/counters, two I2C, two SPI, two UART, an external memory bus (PMP/EBI), and parallel master port. The on-chip 80 MHz internal oscillator with PLL and Fail-Safe Clock Monitor supports low-power Sleep, Idle, and Deep Sleep modes while keeping peripherals operating. Typical applications include industrial Ethernet gateways, CAN-to-Ethernet bridges, USB-OTG peripherals (HID, CDC, MSD, audio), embedded web servers, and automotive infotainment nodes. The combination of integrated USB PHY and Ethernet MAC eliminates external transceiver chips on cost-sensitive designs, reducing BOM count and PCB area. When designing with this part, take care to supply 3.3V regulated rails because the core tolerates only 2.3 V to 3.6 V. Provide 100 nF decoupling on each VDD pin and a 10 uF bulk cap on AVDD. The 'H' before -80V/PT denotes the high-pin-count variant (64 pins); pin-compatible 100-pin PF variants exist if you later need more I/O.

USD $7,10 En stock

PIC32MX795F512L-80I/BG

PIC32MX795F512L-80I/BG - 80MHz MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX795F512L-80I/BG is a high-performance 32-bit MIPS M4K microcontroller running at 80 MHz with 1.56 DMIPS/MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM, housed in a 121-pin TFBGA (10x10 mm) package. It is part of the PIC32MX5/6/7 family and delivers up to 1.56 DMIPS/MHz of processing performance while consuming modest power, making it suitable for connected embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory (Flash), data memory (RAM), and a rich set of programmable peripherals including timers, communication interfaces, and analog blocks. The PIC32MX5/6/7 family sits within Microchip's broader PIC32 product line, which falls under the MIPS-based MCU architecture and ultimately into the embedded microcontroller category of semiconductors used for system control and connectivity. Key features of the PIC32MX795F512L-80I/BG include 16-channel 10-bit ADC, six UART modules, two CAN controllers, an integrated 10/100 Mbit Ethernet MAC, USB OTG/Host/Device, five I2C and four SPI peripherals, eight DMA channels, five 16-bit timers/capture/compare, and 85 general-purpose I/O pins. The supply voltage range is 2.3 V to 3.6 V (typical 2.5 V / 3.3 V operation), and the operating temperature spans -40°C to +85°C for the industrial "I" grade variant. Architecturally, the PIC32MX795F512L-80I/BG combines a 32-bit MIPS M4K core with separate Flash and SRAM buses, a Prefetch Cache Controller for accelerated Flash execution, and a peripheral bus that connects communication, analog, and timer blocks. Compared with earlier PIC24/dsPIC devices, the PIC32 provides higher performance, deterministic interrupt latency, and rich connectivity peripherals — all critical for networked and USB-attached designs. Typical applications include industrial Ethernet gateways, USB peripheral controllers, CAN-based automotive body and industrial nodes, embedded web servers, and connected consumer devices. The integrated Ethernet MAC combined with USB OTG and CAN makes it especially compelling for industrial automation, building automation, and IoT edge nodes. When designing with this MCU, allocate sufficient decoupling (0.1 µF + bulk caps) near each VDD/VSS pair and follow Microchip's recommended PCB layout guidelines for TFBGA packages — including via-in-pad or dog-bone fan-outs — to maintain signal integrity for high-speed Ethernet and USB signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with an at-a-glance engineering summary for sourcing and second-sourcing decisions.

USD $9,10 En stock

PIC32MX795F512L-80I/PF

PIC32MX795F512L-80I/PF - 80MHz 32-bit MCU, USB, CAN, Ethernet | Microchip

The Microchip Technology PIC32MX795F512L-80I/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS), integrating 512 KB of Flash and 128 KB of SRAM in a 100-pin TQFP (14x14) package. It combines a 10/100 Mbit Ethernet MAC, USB 2.0 On-The-Go, two CAN 2.0b controllers, eight DMA channels, and up to 51 general-purpose I/O pins, targeting high-performance embedded connectivity applications. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication interfaces) on a single silicon die. The PIC32 family belongs to the broader category of embedded RISC microcontrollers, scaling from low-power 8-bit PIC MCUs up to high-performance MIPS-based parts like this one. They sit in the power-management and processing hierarchy alongside microprocessors, DSPs, and ASICs as a programmable, software-defined hardware platform. Key features include five 16-bit timers plus two 32-bit timers, dual 4-channel hardware compare/PWM units, an 8-channel 10-bit ADC capable of 1 Msps, two I2C, two SPI, and four UART interfaces. The integrated Ethernet MAC supports MII/RMII PHY interfaces, while the USB OTG controller supports Host, Device, and On-The-Go operation. The part also includes a parallel master port (PMP) for graphics and external memory interfacing. The device is supported by the MPLAB X IDE, MPLAB Harmony integrated software framework, and the XC32 compiler. JTAG and two-wire ICSP interfaces allow in-system programming and debugging. Code protection and a unique device ID aid in anti-cloning and traceability. Memory-mapped peripherals and a 32-bit wide Flash controller sustain high code-fetch throughput for the M4K core. Typical applications include industrial Ethernet gateways, automotive CAN/USB hubs, building automation controllers, graphic LCD HMI panels, USB device peripherals, and embedded web servers. Designers favor it when deterministic interrupt latency, real-time connectivity, and generous program memory are all required on a single chip. A key design consideration is power budgeting: at 80 MHz across 3.3 V with active peripherals, the part can consume significant current, so decoupling must use a 10 uF bulk plus 100 nF high-frequency caps near each power pin. Designers should also implement firmware-based Ethernet PHY configuration and follow Microchip TCP/IP stack examples in MPLAB Harmony. This page synthesizes distributor pricing, same-brand drop-in variants, and practical design notes not consolidated in the standalone manufacturer datasheet.

USD $9,95 En stock

PIC32MX795F512L-80I/PT

PIC32MX795F512L-80I/PT - 80MHz MIPS MCU 512KB Flash USB/Ethernet/CAN | Microchip

The Microchip Technology PIC32MX795F512L-80I/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz (105 DMIPS), integrating 512 KB of Flash program memory and 128 KB of SRAM, with on-chip USB 2.0 OTG (integrated PHY), 10/100 Ethernet MAC (MII/RMII), and dual CAN 2.0b controllers, in a 100-pin TQFP (PT) package with 85 GPIO pins and an industrial -40C to +85C operating range. A 32-bit microcontroller (MCU) is a programmable logic device that executes instructions from on-chip Flash memory, providing significantly higher throughput than 8-bit or 16-bit MCUs while integrating peripherals (timers, ADC, communication controllers) and memory on a single die. In the broader taxonomy, the PIC32MX family sits under Microchip's PIC32 (PIC) umbrella as a MIPS-based high-performance line aimed at embedded connectivity, bridging the gap between legacy PIC16/PIC24 devices and the higher-end PIC32MZ ARM-class portfolio. The '795' designator indicates the premium feature set: full USB OTG, Ethernet MAC, dual CAN, and maximum Flash/RAM density within the MX5/MX6/MX7 family. Key features include 8 dedicated DMA channels for peripheral offload, a 5-stage Harvard pipeline, 16-channel 10-bit ADC at 1 MSps, five 16-bit timers/counters, two comparators, two I2C, two SPI, and up to six UART interfaces. The integrated USB OTG PHY eliminates external PHY components, while the Ethernet MAC supports both MII and RMII for PHY flexibility. The 100-pin TQFP package has mature PCB layout libraries available from Microchip and third parties. Architecturally, the device uses a Harvard memory architecture with separate instruction and data buses, hardware multiply/divide, and a prefetch cache to sustain throughput. The 8-channel dedicated DMA engine enables zero-CPU-overhead data movement between peripherals and RAM, critical for high-bandwidth Ethernet and USB stacks. The peripheral bus matrix allows concurrent DMA-driven traffic on USB, Ethernet, and CAN while the core executes user tasks, supporting deterministic multi-protocol industrial buses. Typical applications include industrial Ethernet gateways, CAN-based automotive body controllers, USB-OTG device/host peripherals, embedded web servers, and PIC32 Bluetooth/USB bridging. The part is also a fit for PLC communication modules and Ethernet/IP nodes where deterministic connectivity matters. When designing with this part, ensure decoupling follows Microchip's 100-pin TQFP reference design (typically 100 nF + 10 uF bulk on each VDD rail), reserve an ICSP header for MPLAB ICD programming, and verify that the chosen Ethernet PHY's MII/RMII voltage matches the MCU's 3.3V I/O. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MX7xx family (same 100-pin TQFP footprint), and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to a working BOM.

USD $7,55 En stock

PIC32MX795F512L-80I/TL

PIC32MX795F512L-80I/TL - 80MHz 32-bit MCU, 512KB Flash, USB/CAN/ENET

The Microchip Technology PIC32MX795F512L-80I/TL is a high-performance 32-bit microcontroller from the PIC32MX5/6/7 family, integrating a MIPS32 M4K core running at up to 80 MHz, 512 KB of Flash program memory, and 128 KB of SRAM, all in a 124-pin VTLA (9x9 mm) surface-mount package. The device is purpose-built for embedded connectivity, combining a 10/100 Mbit Ethernet MAC, two CAN 2.0b controllers, USB 2.0 On-The-Go (OTG) with Host and Device support, plus rich serial peripherals including 6 UARTs, 5 I2C and 4 SPI channels, and 85 general-purpose I/Os. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, working RAM, and a wide range of peripherals on one die. PIC32MX MCUs sit in the broader taxonomy of microcontroller -> embedded controller -> system-on-chip -> semiconductor. Compared with 8-bit or 16-bit MCUs, 32-bit devices deliver substantially more compute per MHz, larger linear address spaces, and richer connectivity peripherals, which makes them suitable for networked and graphical products that previously required an external processor. Key features include a 16-channel 10-bit ADC, five 16-bit timers, an internal 8 MHz and 32 kHz oscillator pair, an integrated Real-Time Clock Calendar (RTCC), and a Charge Time Measurement Unit (CTMU). The 80 MHz core, 1.56 DMIPS/MHz pipeline and hardware Multiply/Divide yield 124 DMIPS, allowing deterministic handling of Ethernet stacks, USB stacks, and CAN applications concurrently. 512 KB self-programmable Flash with EEPROM emulation supports in-field firmware upgrades. Typical applications include industrial Ethernet nodes, CAN-based automotive body and motor-control gateways, USB device and embedded-host products, and connected appliances. The combination of Ethernet plus CAN and USB in a single device eliminates external bridge ICs, reducing PCB area and BOM cost. Designers should observe the maximum 80 MHz system clock across the -40C to +85C industrial temperature range and provide adequate decoupling. JTAG and two-wire ICSP interfaces are supported for MPLAB X IDE development with MPLAB Harmony and XC32 toolchains. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design considerations that are not gathered in a single place on the manufacturer datasheet, providing a single reference for engineers evaluating the PIC32MX795F512L-80I/TL for new designs.

USD $7,80 En stock

PIC32MX795F512L-80V/PF

PIC32MX795F512L-80V/PF - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX795F512L-80V/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz with 512 KB of Flash and 128 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates a 10/100 Mbps Ethernet MAC, USB 2.0 On-The-Go, two CAN 2.0b controllers, six UART, five I2C, four SPI ports, and a 16-channel 10-bit ADC, targeting connected-embedded designs. A 32-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and peripherals built on a single CMOS die. The PIC32MX5/6/7 family belongs to the broader hierarchy MCU -> microcontroller -> embedded processor -> semiconductor IC. Compared with 8-bit and 16-bit MCUs, 32-bit parts deliver higher Dhrystone MIPS, larger linear address space, and richer peripheral integration, enabling TCP/IP stacks, USB device/host/OTG roles, and CAN-based industrial networking on a single chip. Key features of this part include 80 MHz core / 105 DMIPS performance, 512 KB Flash with 12 KB auxiliary boot Flash, 128 KB SRAM, full-speed USB-OTG with dedicated DMA, dual CAN 2.0b modules, 10/100 Ethernet MAC with MII/RMII interface, 51 GPIO, a 16-channel 10-bit 1 Msps ADC, five timer/counters, parallel master port, and JTAG/ICSP debug. The 2.3 V-3.6 V single supply and industrial -40C to +105C V-temp range (suffix V) suit industrial and automotive-adjacent environments. The device is built on a 5-stage pipelined MIPS32 M4K core with single-cycle multiply, hardware divide, and a multi-vector interrupt controller with eight priority levels and Fail-Safe Clock Monitor. Programmable prefetch cache and dual-panel Flash accelerate code execution. The 100-pin TQFP footprint is pin-compatible with most PIC24 and dsPIC DSC devices, simplifying migration and PCB reuse across the family. Typical applications include industrial Ethernet gateways and PLCs, USB HID/CDC and CAN-to-Ethernet bridges, graphical HMI and POS terminals, building-automation controllers (BACnet, Modbus TCP), and serial-protocol concentrators that aggregate UART, SPI, and I2C field devices onto Ethernet or USB. When designing with this MCU, allocate I/O carefully - the 100-pin TQFP exposes five 5 V-tolerant ports and a JTAG pinout that shares pins with trace; plan the JTAG/TRACE mux early. Add a 32.768 kHz crystal plus load capacitors for the RTCC if RTC functionality is required, and observe the strict USB-OTG Vbus / D+/D- trace-length matching for USB certification. This page consolidates distributor inventory, drop-in same-package alternatives, and design notes not collected in the manufacturer datasheet, giving engineers an actionable selection starting point.

USD $9,95 En stock

PIC32MX795F512LT-80I/BG

PIC32MX795F512LT-80I/BG - 80MHz 32-bit MCU 512KB Flash 121-TFBGA | Microchip

The Microchip Technology PIC32MX795F512LT-80I/BG is a 32-bit MIPS M4K microcontroller running at 80MHz with 1.56 DMIPS/MHz performance, featuring 512KB of Flash program memory and 128KB of SRAM, housed in a 121-pin TFBGA (10x10mm) package. It integrates a 10/100 Mbit Ethernet MAC, USB On-The-Go (OTG), and two CAN 2.0b modules, making it one of the most connectivity-rich members of the PIC32MX5/6/7 family. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals into one package. The PIC32 family uses the MIPS M4K 32-bit RISC core, an industry-standard Harvard architecture enabling predictable real-time behavior with deterministic interrupt latency. Within the broader taxonomy, this part sits in the hierarchy: PIC32MX MCU -> 32-bit MIPS microcontroller -> embedded MPU/MCU family -> semiconductor. Its 80MHz core and rich connectivity peripherals target embedded connectivity-based applications. Key features include 512KB Flash (512K x 8) for program storage, 128KB SRAM for data, 8 channels of dedicated DMA for peripheral offload, an integrated 10/100 Ethernet MAC, USB OTG with PHY interface, and dual CAN 2.0b controllers. Operating from 2.3V to 3.6V, the device provides 51 I/O pins and supports industrial-grade temperature ranges (-40C to +85C industrial), making it suitable for harsh environments. Architecture depth: The PIC32MX795F512L uses the MIPS32 M4K core with hardware multiply/divide, 5-stage pipeline, and tightly coupled peripherals accessible via separate peripheral buses. The 'T' suffix denotes tape-and-reel packaging, 'L' denotes industrial temperature grade, '80' denotes 80MHz, and 'I' after 80 indicates industrial temp. The 121-TFBGA package is a fine-pitch BGA optimized for compact designs requiring maximum connectivity. Typical applications include industrial Ethernet gateways, USB-enabled embedded devices, CAN-bus automotive ECUs, building automation controllers, and networked sensor hubs. The combination of Ethernet, USB OTG, and dual CAN makes this part particularly suited for industrial protocol converters and IoT edge gateways. When designing with this device, pay close attention to BGA PCB layout requirements - fine-pitch BGA demands microvia stackups, controlled impedance routing for Ethernet and USB, and thermal management for the bottom-side thermal pad. Use MPLAB Harmony framework to accelerate peripheral driver development.

USD $8,65 En stock

PIC32MX795F512LT-80I/PT

PIC32MX795F512LT-80I/PT - 80MHz 32-bit MCU 512KB Flash 100-TQFP | Microchip

The Microchip PIC32MX795F512LT-80I/PT is a 32-bit MIPS32 M4K microcontroller running at 80 MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It is part of the PIC32MX5/6/7 family and combines high-performance CPU throughput with on-chip 10/100 Ethernet MAC, USB On-The-Go, and dual CAN 2.0b controllers, targeting connected embedded designs. A 32-bit microcontroller is an integrated circuit that combines a microprocessor core, program and data memory, and a rich set of peripherals (timers, communication controllers, ADC) onto a single die. Microcontrollers sit at the top of the embedded computing hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC32MX family uses the MIPS32 instruction set, providing deterministic interrupt latency and broad C-language tool support through MPLAB XC32 and MPLAB Harmony frameworks. Key features of the PIC32MX795F512LT-80I/PT include 16 KB of instruction cache, prefetch module, 8-channel DMA, up to 85 general-purpose I/O pins, six UART modules, five I2C and four SPI peripherals, a 16-channel 10-bit ADC, five 16-bit timers/counters, and an internal 8 MHz / 32 kHz oscillator pair with PLL multiplication to 80 MHz. The device operates from 2.3 V to 3.6 V, suitable for battery-backed and USB-powered nodes. Architecturally, the M4K core delivers 1.56 DMIPS/MHz and supports both MIPS16e code compression and microMIPS mode, halving Flash footprint for compact applications. The integrated Ethernet MAC, USB-OTG PHY interface, and dual CAN modules remove the need for external connectivity ICs in industrial gateways, automotive body controllers, and audio streaming devices. Typical applications include industrial Ethernet nodes, USB peripherals, CAN-based automotive ECUs, IoT gateways, and audio streaming appliances. The wide peripheral mix also suits medical data loggers and graphical HMI panels using an external display controller. When designing with this device, allocate sufficient PCB area for the 12x12 mm TQFP footprint and follow Microchip's 100-pin TQFP PIM hardware checklist to preserve signal integrity on USB and Ethernet differential pairs. Use the MPLAB Harmony configurator for clock tree setup and pin assignment to avoid manual register mistakes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including parametric proximity scores and cross-brand pin-compatible replacements verified against the Microchip PIC32MX5/6/7 family datasheet.

USD $6,53 En stock

PIC32MX795F512LT-80I/TL

PIC32MX795F512LT-80I/TL - 32-Bit 80MHz MCU 512KB | Microchip

The Microchip Technology PIC32MX795F512LT-80I/TL is a 32-bit MIPS32 M4K core microcontroller running at 80 MHz with 512 KB of Flash program memory, 128 KB of SRAM, and an integrated 10/100 Ethernet MAC, housed in a 124-pin VTLA (TL) package. It delivers 1.56 DMIPS/MHz performance and integrates USB OTG, two CAN 2.0B controllers, and six UART/SPI/I2C serial channels for connectivity-rich embedded designs. A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory, data memory, and configurable peripherals. The PIC32MX795F512L sits in the 32-bit MCU class, above 8-bit and 16-bit devices, and below application processors such as the Cortex-A family. Within the Microchip PIC32MX5/6/7 series, it is the connectivity flagship, adding Ethernet MAC and dual CAN to the MIPS32 M4K pipeline. Key differentiators include the integrated 10/100 Ethernet MAC with dedicated DMA, USB 2.0 full-speed OTG with an on-chip transceiver, dual CAN 2.0B modules, and 16-channel 10-bit ADC sampling at 1 Msps. The 512 KB Flash and 128 KB SRAM support RTOS-based applications and TCP/IP stacks without external memory. The M4K core uses a 5-stage pipeline with a single-cycle 32x16 MAC, delivering 1.56 DMIPS/MHz. The peripheral pin select (PPS) feature remaps digital I/O to reduce PCB routing constraints, while the 8-channel DMA controller offloads data movement from the CPU. Typical applications include industrial Ethernet gateways, CAN-to-Ethernet protocol bridges, motor control with field-oriented control, USB device/host instrumentation, and building automation controllers. The 2.3 V to 3.6 V operating range and -40C to +85C industrial temperature grade suit factory-floor environments. When designing with this device, place the 0.1 uF decoupling capacitors within 5 mm of each VDD pin and keep the Ethernet differential pairs at 100 ohm impedance. The VTLA package requires a reflow profile matched to its exposed pad for reliable thermal and electrical grounding. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

USD $6,53 En stock

PIC32MX795F512LT-80V/BG

PIC32MX795F512LT-80V/BG - 80MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip PIC32MX795F512LT-80V/BG is a 32-bit MIPS M4K microcontroller operating at 80 MHz (105 DMIPS) with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 121-pin TFBGA (10x10 mm) package. The "LT" tape-and-reel suffix and "BG" package suffix designate a lead-free TFBGA variant specified for the -40C to +105C industrial/automotive temperature grade ("V"), while "L" indicates low-power. This PIC32MX5/6/7 family device integrates USB 2.0 On-The-Go with PHY, a 10/100 Ethernet MAC with MII/RMII, dual CAN 2.0b controllers, five I2C, four UART, four SPI, eight DMA channels, and a 16-bit parallel master port. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a configurable set of peripherals into one IC. 32-bit MCUs sit above 8-bit/16-bit microcontrollers in the embedded hierarchy and are typically used in applications that require higher computational throughput, larger address spaces, or richer connectivity. PIC32 belongs to the MIPS-based M4K family and runs the same instruction set as larger MIPS processors, which eases code portability. Key features include 105 DMIPS core performance at 80 MHz, an instruction cache and prefetch module to hide Flash latency, hardware multiply/divide, and a 5-stage pipeline. The integrated Ethernet MAC, dual CAN, and USB-OTG controller make this device a connectivity-oriented silicon aimed at industrial networking, automotive gateways, and embedded web-server nodes. MPLAB Harmony framework support provides TCP/IP stacks (TCP, UDP, HTTP, SNMP), USB middleware, and graphics libraries out of the box. Typical applications include industrial Ethernet-enabled PLCs, automotive body and gateway controllers, USB device/host/OTG peripherals, CAN-based distributed control systems, and graphical HMI terminals with parallel-port TFT driving. The 121-pin TFBGA is the largest package in the family, exposing the parallel master port for external bus interfacing. When designing with this part, ensure the VCAP pin has a low-ESR 10 uF ceramic to ground for internal core regulator stability, route analog and digital grounds separately, and consult the PIC32MX5XX/6XX/7XX family datasheet for errata. The 121-TFBGA requires PCB design rules for fine-pitch BGA (0.8 mm pitch typical) including via-in-pad or dog-bone fanouts. This page synthesizes distributor pricing, TFBGA-package drop-in alternatives from the same Microchip family, and practical design notes not found on a single distributor product page.

USD $7,59 En stock

PIC32MX795F512LT-80V/PF

PIC32MX795F512LT-80V/PF - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip PIC32MX795F512LT-80V/PF is a 32-bit MIPS32 M4K microcontroller operating at up to 80MHz with 512KB Flash and 128KB SRAM in a 100-pin TQFP (14x14) package. It integrates 10/100 Mbit Ethernet MAC, USB 2.0 OTG, two CAN modules, six UART, five I2C, and four SPI interfaces, targeting embedded connectivity applications with industrial-grade -40C to +105C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, ADCs, and communication interfaces. The PIC32 family from Microchip sits in the 32-bit MCU hierarchy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MX family, and is widely used in industrial control, IoT gateways, and USB-connected embedded products where deterministic real-time performance and a broad peripheral mix are required. Key specifications include 512KB program Flash (plus 12KB auxiliary Flash), 128KB SRAM, a 5-channel DMA controller, sixteen 10-bit ADC inputs with up to 1Msps conversion, and a parallel master port for external bus expansion. The device supports 2.3V to 3.6V single-supply operation and includes a Fail-Safe Clock Monitor with multiple power management modes (Idle, Sleep, Deep Sleep) to optimize energy consumption in always-on designs. Architecturally, the PIC32MX795F512L uses the MIPS32 M4K core with single-cycle hardware multiply/divide, a 5-stage pipeline, and tightly-coupled peripherals serviced through an 8-channel DMA engine. USB 2.0 Full-Speed OTG with integrated PHY, 10/100 Ethernet MAC, and dual CAN 2.0B controllers make this part well suited for protocol-rich industrial nodes. The 100-pin TQFP exposes 85 user I/O lines with flexible remappable peripheral pins via Peripheral Pin Select (PPS). Typical applications include industrial Ethernet gateways, CAN-bus motor controllers, USB HID/CDC device controllers, building automation nodes, and graphics HMI panels using the parallel master port. The wide peripheral mix replaces multi-chip discrete designs in cost-sensitive industrial products. When designing with this part, attention must be paid to the VCAP pin: a low-ESR 10uF ceramic capacitor (per datasheet) must be placed within 0.25 inch of the pin for the internal 1.8V regulator stability. Decouple every VDD/VSS pair with 0.1uF plus bulk capacitance, and route the 80MHz crystal traces as short and symmetric as possible to avoid EMI and startup failures.

USD $6,90 En stock

PIC32MX210F016B-I/SP

PIC32MXMX210F016B-I/SP - 40MHz 32-bit MCU 16KB Flash 28-SPDIP | Microchip

The Microchip PIC32MX210F016B-I/SP is a 32-bit MIPS M4K microcontroller running at 40 MHz (66 DMIPS), integrating 16 KB of Flash, 4 KB of SRAM, and a USB 2.0 full-speed device controller in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. Active current consumption is below 0.5 mA/MHz, making it suitable for USB-connected embedded products that require both computational headroom and modest power draw. What is a PIC32MX? The PIC32MX family from Microchip Technology extends the PIC architecture to a 32-bit MIPS M4K core while preserving the legacy PIC toolchain and peripheral ecosystem. PIC32MX devices occupy the segment between 8-bit PIC16/PIC18 MCUs and the higher-performance PIC32MZ/PIC32MM lines, targeting USB, graphics, and audio bridging designs where deterministic interrupt latency and large address space matter. They function as mid-range application processors, sitting within the broader hierarchy: microcontroller -> 32-bit MCU -> MIPS M4K core -> PIC32 family. Key features include two I2S/SPI modules for codec and serial audio interfaces, Peripheral Pin Select (PPS) remapping for flexible I/O assignment, a Parallel Master Port (PMP) for graphics or external memory, a 10-bit ADC with up to 13 channels, five 16-bit timers, two comparators, and a Charge Time Measurement Unit (CTMU) that simplifies mTouch capacitive touch button and slider implementation. The on-chip USB 2.0 full-speed device transceiver (12 Mbps) eliminates the need for an external PHY and integrates dedicated DMA channels. Architecturally, the device combines a 5-stage pipelined MIPS32 M4K core with single-cycle hardware multiply, separate 16 KB instruction Flash and 4 KB data RAM, and a dedicated DMA controller with four channels. The USB SIE (Serial Interface Engine) is paired with an internal 96 MHz PLL and on-chip voltage regulator, allowing the part to operate from a single 2.3 V to 3.6 V supply. Typical applications include USB human-interface devices (HID), USB-to-UART bridges, low-cost audio docks using I2S, capacitive touch user interfaces (CTMU), small graphical displays via PMP, and consumer/industrial control nodes requiring on-board USB device connectivity. Through-hole SPDIP packaging also makes it convenient for hobbyist, education, and prototyping builds. When designing with this part, note that the SPDIP variant exposes a reduced pin subset (no USB D+/D- on some 28-pin variants; verify before PCB layout) - the 28-SPDIP does include USB functionality on dedicated pins. Decoupling requires 0.1 µF on each VDD plus bulk capacitance near the VCAP pin. This page synthesizes distributor pricing, drop-in alternatives in the same 28-SPDIP footprint, and practical design notes not consolidated on the manufacturer datasheet.

USD $2,10 En stock

PIC32MX230F064B-I/SP

PIC32MXMX230F064B-I/SP - 32-bit MCU, 64KB Flash, 40MHz, 28-SPDIP | Microchip Technology

The Microchip Technology PIC32MX230F064B-I/SP is a 32-bit RISC microcontroller from the PIC32MX1/2/5 family, featuring a MIPS32 M4K core running at up to 40 MHz with 66 DMIPS performance. It integrates 64 KB of Flash program memory and 16 KB of SRAM, all housed in a 28-pin SPDIP (Skinny Plastic Dual In-line Package) operating from a 2.3V to 3.6V supply. Typical active current consumption is below 0.5 mA/MHz, enabling low-power embedded designs. The -I industrial temperature grade supports -40C to +85C ambient operation, with on-chip temperature measurement and 1 ns high-resolution timer capture. What is a PIC32MX microcontroller? The PIC32MX is a family of 32-bit microcontrollers from Microchip based on the MIPS32 M4K architecture. It is a member of the broader microcontroller (MCU) category within microcontrollers and microprocessors, which itself falls under digital integrated circuits and semiconductors. The PIC32MX family bridges 8-bit PIC microcontrollers and 32-bit ARM Cortex-M devices, offering deterministic MIPS performance, generous on-chip memory, and rich peripherals including USB, I2S, PMP graphics interface, and Peripheral Pin Select (PPS) for flexible signal routing. Key differentiating features of the PIC32MX230F064B-I/SP include Peripheral Pin Select (PPS) for remappable digital I/O, two I2S/SPI modules for codec and serial communication, a Parallel Master Port (PMP) for graphics and external memory interfacing, mTouch capacitive touch support, and a 1 ns resolution Input Capture module for high-precision time measurement. The 28-SPDIP package is pin-through-hole, ideal for prototyping, hobbyist designs, and legacy equipment requiring a DIP footprint. Technically, the device offers five 16-bit general-purpose timers, a 10-bit ADC with up to 1 Msps conversion rate, and CIP (Core Independent Peripherals) that offload tasks from the CPU. The instruction set is a superset of the 16-bit PIC24/dsPIC instruction set, providing familiar development for legacy PIC developers while delivering 32-bit throughput. Typical applications for this MCU include low-cost 32-bit control boards, capacitive touch user interfaces, audio playback with I2S codecs, USB device peripherals, and prototyping on breadboards where the DIP package simplifies rework. It is also well suited for industrial sensor aggregation and small graphics interfaces using the PMP. When designing with the PIC32MX230F064B-I/SP, ensure your programmer/debugger (such as MPLAB PICkit 4 or ICD 4) supports the PGECx/PGEDx ICSP pins on the 28-SPDIP. For high-frequency or noise-sensitive analog designs, route VDD/VSS pairs with decoupling close to the pins and consider the brown-out reset thresholds for battery-powered designs. This page synthesizes distributor pricing, drop-in PIC32MX family alternatives, and design notes not found in the manufacturer datasheet alone, helping engineers shorten selection time and avoid common prototype pitfalls.

USD $2,28 En stock

PIC32MX775F512LT-80V/PT

PIC32MXMX775F512LT-80V/PT - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512LT-80V/PT is a 32-bit MIPS M4K microcontroller running at 80MHz, featuring 512KB Flash and 64KB RAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates 10-bit ADC, USB-OTG, dual CAN, Ethernet MAC, six UART, five I2C, and four SPI interfaces, making it suitable for connected embedded designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. The PIC32MX family uses the industry-standard MIPS M4K core, placing it in the broader 32-bit MCU taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MX series. Compared to 8/16-bit MCUs, the 32-bit architecture enables higher computational throughput, larger address space, and richer peripheral integration for connected and multimedia applications. Key features include 512KB Flash (256K x 8 instructions), 64KB SRAM, 80MHz core clock, 1.56 DMIPS/MHz performance, 10/100 Ethernet MAC, USB 2.0 Full-Speed OTG, two CAN 2.0B controllers, six UART modules, five I2C and four SPI ports, 16-channel 10-bit ADC, and up to 85 GPIO pins depending on package variant. The 100-pin TQFP package provides a generous pin count for multimedia and connectivity designs. The architecture combines the MIPS M4K core with Microchip's peripheral library and MPLAB Harmony framework, enabling code reuse across PIC32 families. Hardware cryptographic accelerators, DMA, and a parallel master port extend capability for industrial and consumer applications requiring deterministic real-time response. Typical applications include industrial automation controllers, Ethernet-enabled sensor hubs, automotive body controllers, USB peripherals, and embedded HMI/gateway products. The dual CAN interfaces make it particularly suitable for vehicle network bridge nodes, while Ethernet MAC enables networked factory equipment. When designing with this device, ensure the MCLR reset circuit and decoupling capacitors match reference schematics; insufficient decoupling can cause instability at 80MHz. The 'V' suffix indicates the -40C to +105C industrial temperature grade, suitable for harsh environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with actionable procurement and substitution guidance for the PIC32MX775F512LT-80V/PT.

USD $5,45 En stock

PIC32MZ0512EFE064-E/MR

PIC32MZ0512EFE064-E/MR - 32-bit 180MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE064-E/MR is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running at up to 180 MHz, featuring 512 KB of Flash and 128 KB of SRAM, housed in a 64-pin QFN (9x9) package. As part of the PIC32MZ EF family, it integrates an FPU, HS USB, Ethernet MAC, CAN, SQI, and advanced analog peripherals targeting connectivity-rich industrial, automotive (AEC-Q100), IoT, graphics HMI, and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set. The PIC32MZ EF family occupies the high-performance tier of Microchip's MIPS-based 32-bit lineup, sitting above PIC32MX (80-120 MHz) parts and below the higher-frequency PIC32MZ EF parts rated at 200/252 MHz. Within the system hierarchy, the MCU serves as the central processing element between sensor inputs (analog/digital) and actuator or communication outputs, replacing discrete logic and external memory blocks. Key features of the PIC32MZ0512EFE064-E/MR include a 200 MHz capable MIPS32 M-Class core (de-rated to 180 MHz for the 'E' automotive grade), 512 KB Flash with live-update support, 128 KB SRAM, hardware FPU for IEEE-754 single-precision math, integrated 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 High-Speed (480 Mbps) OTG with on-chip transceiver, dual CAN 2.0B controllers, SQI (Serial Quad Interface) for high-speed external memory, and a 12-bit 1 MSPS ADC with up to 48 channels. It also exposes multiple UART, SPI, I2C, I2S, and PMP interfaces for graphics and audio peripherals. Architecturally, the device pairs a 5-stage MIPS32 pipeline with tightly coupled instruction and data caches, a configurable prefetch module, and a dedicated crypto/fast-math engine (the 'F' in E-F-E-064 indicates the presence of the FPU + crypto accelerator). The automotive-grade 'E' temperature suffix specifies -40C to +125C operation, distinguishing it from the industrial 'I' variant at -40C to +85C with 200 MHz capability. Typical applications include industrial IoT gateways (leveraging Ethernet + WiFi co-processor interfaces), automotive body and infotainment ECUs (AEC-Q100 qualified), HMI panels with TFT displays (using PMP + SQI external memory), motor-control drives (CAN + PWM + ADC), and audio processing nodes (I2S + DMA). The 64-QFN 9x9 mm footprint supports compact board designs requiring high pin density. When designing with this MCU, ensure the 180 MHz operation is respected under AEC-Q100 thermal conditions and that the SQI bus is used for any large graphics framebuffers. The integrated Ethernet MAC requires an external PHY, and the HS USB PHY is on-chip, simplifying USB host/device designs. This page synthesizes distributor pricing, verified drop-in alternatives within the same 64-QFN footprint, and practical design notes not found in the manufacturer datasheet.

USD $6,86 En stock

PIC32MZ0512EFE064-E/PT

PIC32MZ0512EFE064-E/PT - 32-bit 200MHz MCU 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE064-E/PT is a high-performance 32-bit microcontroller from the PIC32MZ EF family, built around the MIPS32 M-Class Warrior core with integrated floating-point unit (FPU). It operates at up to 200 MHz delivering 330 DMIPS, integrates 512 KB of Flash and 128 KB of SRAM (Mouser listing), and is housed in a 64-pin TQFP package (10x10 mm). The device is qualified to the automotive AEC-Q100 standard with an extended operating temperature range of -40C to +125C, making it suitable for harsh-environment embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. Within the broader taxonomy, 32-bit MCUs sit above 8-bit and 16-bit MCUs in performance, below microprocessors (MPUs) that lack integrated peripherals, and within the semiconductor hierarchy they belong to the microcontroller family of integrated circuits. The PIC32MZ EF family specifically targets connectivity-rich applications, combining DSP extensions, dual-panel live-update Flash, and high-speed communication peripherals. Key features of the PIC32MZ0512EFE064-E/PT include four 64-bit accumulators and single-cycle MAC operations that accelerate DSP routines, IEEE 754-compliant hardware floating-point, dual-panel Flash supporting live firmware updates without downtime, and 24 channels of 12-bit ADC with dedicated DMA. Connectivity is delivered through HS USB, Ethernet, CAN, multiple UART/SPI/I2C ports, and dedicated audio/graphics peripherals (per Microchip datasheet). The 64-pin TQFP footprint enables easy hand-soldering and prototype rework compared to fine-pitch QFN alternatives. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways with Ethernet/USB, motor control drive boards, and graphics-driven human-machine interfaces. The AEC-Q100 qualification broadens deployment into under-hood and other automotive-grade designs where temperature swing and reliability demands exceed consumer-grade thresholds. When designing with this device, allocate sufficient decoupling (typically 100 nF + bulk capacitors per rail pair) and follow Microchip's trace-routing guidance for the Ethernet and USB differential pairs to maintain signal-integrity compliance. The Harmony software framework and MPLAB development environment accelerate peripheral configuration and code generation.

USD $6,95 En stock

PIC32MZ0512EFE064T-I/MR

PIC32MZ0512EFE064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE064T-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, packaged in a 64-pin QFN (9x9 mm) and supplied on tape and reel. It features a 200 MHz MIPS Warrior M-class core delivering up to 330 DMIPS, an integrated IEEE 754 floating-point unit (FPU), and four 64-bit accumulators with single-cycle MAC, saturating, and fractional math support. The device integrates 512 KB of Flash with dual-panel Live-Update support plus 128 KB of SRAM, plus high-speed connectivity peripherals including USB 2.0 High-Speed, 10/100 Ethernet MAC, and multiple UART/SPI/I2C channels for networked embedded designs. A 32-bit MCU is a microprocessor whose internal data paths, registers, and arithmetic units are 32 bits wide, allowing single-instruction processing of larger data words than 8-bit or 16-bit controllers. Within the broader taxonomy of microcontrollers, this device sits under the sub-class of Cortex-M/MIPS M-class application processors, which target high-performance connected embedded applications rather than ultra-low-power sensing nodes. The PIC32MZ EF family is engineered for industrial, automotive, IoT, graphics/HMI, and motor control segments where DSP-class arithmetic, large code footprint, and rich wired connectivity are required simultaneously. The PIC32MZ0512EFE064T-I/MR combines a 12-bit 18 Msps ADC, a graphics controller for TFT displays, audio interfaces (I2S/AC97), multiple general-purpose 32-bit timers, an 8-channel hardware crypto engine (not present in this 'EFE' variant), and an interrupt controller with five priority levels. The floating-point unit accelerates single- and double-precision math, dramatically speeding signal processing routines, FFTs, and control loops versus integer-only cores. The part is rated for an industrial -40C to +85C temperature range and is qualified for demanding environments including factory automation and automotive body/chassis applications. Typical applications include industrial IoT gateways with on-board Ethernet, HMI panels with TFT-LCD graphics, motor control (BLDC and PMSM), audio processing peripherals with USB streaming, and connected sensors requiring high-speed connectivity. The Live-Update dual-panel Flash enables in-field firmware upgrades without downtime, a critical feature for deployed industrial assets. When designing with this device, allocate adequate PCB copper area under the exposed pad of the QFN package for thermal dissipation and ground return, route the 50 MHz Ethernet reference clock with controlled impedance, and provide bulk decoupling on every supply rail as recommended in the device datasheet's power-supply section. This page synthesizes distributor pricing, drop-in Microchip alternatives, application guidance, and design notes not found in the manufacturer datasheet, helping procurement and design engineers make informed decisions.

USD $6,25 En stock

PIC32MZ0512EFE100-E/GJX

PIC32MZ0512EFE100-E/GJX - 200MHz 512KB Flash MCU TFBGA-100 | Microchip

The Microchip PIC32MZ0512EFE100-E/GJX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, running up to 200 MHz with 330 DMIPS performance and 512 KB of Flash memory plus 128 KB of SRAM. Housed in a 100-ball Thin Fine-Pitch Ball Grid Array (TFBGA) measuring 7x7 mm, this MCU is built around the MIPS32 M-Class Warrior core with an integrated IEEE 754-compliant single-precision Floating Point Unit (FPU), DSP-enhanced instructions, four 64-bit accumulators, single-cycle MAC, and saturating/fractional math support. The "-E" suffix indicates an extended operating temperature range of -40C to +125C, suiting industrial and automotive-grade embedded designs. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals on a single die. The PIC32MZ EF family specifically targets connectivity-intensive applications, integrating High-Speed USB, 10/100 Ethernet MAC, CAN (where configured), multiple UART/SPI/I2C interfaces, 12-bit ADC, analog comparators, and graphics/audio peripherals. As a hypernym hierarchy, PIC32MZ EF sits under: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. These MCUs are typically deployed in industrial HMI, motor control, IoT gateways, and automotive infotainment subsystems. Key features include dual-panel Flash for live firmware updates without downtime, a 200 MHz core with hardware multiply/divide and DSP extensions, a Crypto engine (Note: this -E variant ships with No Crypto, per the family variant table), up to 16-channel 12-bit ADC at 1 Msps, and a wide peripheral mix designed for graphics TFT driving and audio processing. The FPU offloads floating-point operations, enabling faster sensor fusion and DSP workloads. The integrated Ethernet MAC and HS-USB PHY interface streamline connected-product designs by reducing external component count and BOM cost. Architecturally, the device pairs a high-throughput 200 MHz core with multi-channel DMA, dedicated motor-control PWM, and a peripheral bus matrix that minimizes contention. The 100-ball TFBGA package is the smallest footprint option in the family, freeing board area for radios, sensors, or display drivers. The FPU accelerates control loops in motor drive and power-conversion applications, while the dual-panel Flash eliminates application downtime during firmware upgrades - a critical feature for industrial IoT nodes requiring continuous operation. Typical applications include industrial HMI panels, IoT edge gateways with Ethernet, BLDC and PMSM motor drives, automotive body and infotainment subsystems, medical patient monitoring, and connected consumer graphics products. The 7x7 mm TFBGA package is preferred when PCB real estate is at a premium and the design tolerates BGA assembly. When designing with this part, plan BGA fanout and via-in-pad PCB fabrication carefully. The -E temperature grade enables under-hood automotive and outdoor industrial use, but thermal derating still applies; ensure junction temperature stays within the 125C maximum with proper PCB copper spreading. Program/debug via the standard 4-wire ICSP interface using any PGECx/PGEDx pin pair, and leverage MPLAB Harmony 3 for peripheral drivers and middleware. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found in the manufacturer datasheet alone.

USD $9,52 En stock

PIC32MZ0512EFE100-E/PT

PIC32MZ0512EFE100-E/PT - 32-bit 180MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-E/PT is a high-performance 32-bit MIPS M-Class microcontroller running at 180 MHz with 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. It is the extended-temperature ("-E") variant of the PIC32MZ EF family, designed for industrial and automotive-grade connectivity applications, and is supplied in tray packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of peripherals on one silicon die. The PIC32 architecture belongs to the wider taxonomy of microcontrollers -> microprocessors -> semiconductors -> integrated circuits. The PIC32MZ EF family specifically combines a MIPS Warrior M-class CPU with a hardware floating-point unit (FPU), enabling single-cycle MAC, dual-panel Flash for live update support, and DSP-enhanced arithmetic with IEEE 754 compliance. Key features include 200 MHz/330 DMIPS core performance, 512 KB Flash with 160 KB dedicated boot Flash, 128 KB SRAM, a 12-bit ADC with up to 40 analog channels, 9 USB, Hi-Speed USB, Ethernet MAC, SQI (Serial Quad Interface), and dedicated DMA channels. The extended-temperature grade (-40C to +125C) makes it suitable for harsh industrial and automotive environments, while the integrated crypto engine, RNG, and FPU accelerate connected and graphics applications. Architecturally, the PIC32MZ EF uses a superscalar pipeline with dual-issue capability, branch prediction, and tightly-coupled peripherals routed through multiple DMA channels. Dual-panel Flash allows safe firmware live updates in the field. The high pin count (100) exposes rich connectivity including HS-USB, Ethernet, CAN, SQI for external QSPI Flash, and 12-bit ADC, enabling single-MCU designs for HMI, motor control, and IoT gateways. Typical applications include industrial IoT gateways, automotive HMI, motor control inverters, graphics displays, audio processing, and connected embedded systems. The wide peripheral mix makes it ideal as a host MCU for Ethernet-connected sensors and as a gateway between industrial fieldbuses and cloud services. When designing with this part, plan trace impedance for the HS-USB and Ethernet differential pairs, decouple VDD/VUSB per datasheet reference designs, and select boot Flash strategy (live update vs single panel) early, as this affects linker scripts and application architecture. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7,92 En stock

Sous-catégories

Produits (32725)