Circuits intégrés

STM32F405RGT7TR

STM32F405RGT7TR - 168MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F405RGT7TR is a high-performance 32-bit Arm Cortex-M4 microcontroller with FPU and DSP instructions, operating at up to 168 MHz, packaged in a 64-pin LQFP (T7) with 1 Mbyte of Flash and 192+4 Kbytes of SRAM. Per the ST datasheet family document for STM32F405xx/STM32F407xx, the part integrates an adaptive real-time (ART) Accelerator that enables 0-wait-state execution from Flash, delivering 210 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1). The Cortex-M4F core features a single-precision FPU, full DSP instruction set, and a memory protection unit (MPU). What is a Cortex-M4 microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The Cortex-M4 is Arm's mainstream mixed-signal MCU core, adding hardware FPU and DSP extensions on top of the Cortex-M3 architecture, targeted at applications that demand both deterministic control and real-time signal processing. In the taxonomy chain: Cortex-M4 -> ARM Cortex-M -> 32-bit RISC MCU -> microcontroller -> embedded semiconductor. Key features include three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, USB 2.0 OTG full-speed and high-speed with on-chip PHY, 10/100 Ethernet MAC, two CAN 2.0B interfaces, an SDIO for SD/MMC cards, and 17 timers plus three I2C, four USART/UART, three SPI, and two I2S peripherals. The integrated 4-byte CCM data SRAM is useful for packet storage in Ethernet stacks, while the FSMC memory controller allows external SRAM, NOR/NAND Flash, and PSRAM expansion. Operating voltage spans 1.8 V to 3.6 V. The architecture uses a multi-layer AHB/APB bus matrix with seven peripheral DMA channels supporting parallel data streams without CPU intervention. The ART Accelerator with 64-bit Flash interface and prefetch buffer delivers true 0-wait-state execution even at 168 MHz. Cryptographic options include AES 128/192/256-bit hardware acceleration on STM32F407 family SKUs; the F405 is the non-crypto variant. Low-power modes (Sleep, Stop, Standby) plus a VBAT domain for RTC and backup registers suit battery-backed designs. Typical applications include industrial motor drives (FOC control via DSP), USB peripherals and HID devices, Ethernet-connected IoT gateways, audio processing with I2S/SAI interfaces, and high-speed data acquisition with triple interleaved ADCs. Developers use STM32CubeIDE, STM32CubeMX, and the HAL/LL driver libraries for code generation and bring-up. When designing with this MCU, pay close attention to power-rail decoupling (1 uF + 100 nF near each VDD pin, plus a 4.7 uF bulk), BOOT0 strap configuration, and JTAG/SWD header placement for in-system programming. The 64-pin LQFP footprint leaves generous board space for crystal, reset, and decoupling networks while exposing most peripherals. This page synthesizes distributor pricing, same-family STM32 drop-in alternatives, design considerations from the manufacturer reference manual, and FAQ content not aggregated on a single distributor page.

USD $7,62 En stock

STM32F405VGT6

STM32F405VGT6 - 168MHz ARM Cortex-M4F MCU | STMicroelectronics

The STM32F405VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4F core with floating-point unit (FPU). It operates at up to 168 MHz, delivering 210 DMIPS and 1.25 DMIPS/MHz, making it suitable for demanding applications such as motor control, medical equipment, and industrial automation. The device integrates 1 MB of flash memory and 192 KB of SRAM, along with a rich set of peripherals including multiple 12-bit ADCs, DACs, timers, and communication interfaces. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of countless electronic devices, from automotive engine control units to consumer electronics. The STM32F405VGT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs. This family is widely used in industrial, consumer, and IoT applications due to its performance, low power consumption, and extensive ecosystem. Key features of the STM32F405VGT6 include a 168 MHz ARM Cortex-M4F core with FPU, 1 MB flash, 192 KB SRAM, and a comprehensive set of peripherals: three 12-bit ADCs (up to 24 channels), two DACs, 12 general-purpose timers, and multiple communication interfaces (USART, SPI, I2C, CAN, USB OTG, Ethernet). The device also features a memory protection unit (MPU), a true random number generator (RNG), and a cryptographic acceleration cell for AES, DES, and 3DES. These features make it a versatile choice for complex embedded applications. The STM32F405VGT6 is manufactured using a 90nm process technology, which balances performance and power efficiency. The core operates at 1.8V to 3.6V, with a wide temperature range of -40°C to +85°C (or +105°C for the VGT6 variant). The device supports various low-power modes, including Sleep, Stop, and Standby, enabling battery-powered applications. The rich peripheral set and high clock speed allow for real-time control and signal processing, making it ideal for applications such as motor control, power conversion, and audio processing. Typical applications include industrial motor control, medical monitoring devices, consumer electronics, and IoT gateways. The STM32F405VGT6 is also popular in drone flight controllers and robotics, where its processing power and peripheral integration are essential. The device is supported by ST's comprehensive development ecosystem, including the STM32CubeMX configuration tool, HAL libraries, and a wide range of development boards. When designing with the STM32F405VGT6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin should be filtered with a ferrite bead and a 1uF capacitor to reduce analog noise. The BOOT0 pin must be configured correctly for the desired boot mode, and the NRST pin should have a 100nF capacitor to ground for reliable reset. Pay attention to the maximum junction temperature (125°C) and ensure adequate thermal management for high-current applications.

USD $8,10 En stock

STM32F405VGT6J

STM32F405VGT6J - 168MHz Cortex-M4 MCU, 1MB Flash | STMicro

The STMicroelectronics STM32F405VGT6J is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU and ART Accelerator, operating at up to 168 MHz and delivering 210 DMIPS (1.25 DMIPS/MHz Dhrystone 2.1) in a 100-pin LQFP (14x14 mm) package. The integrated DSP instructions and single-precision floating-point unit enable efficient signal processing in real-time embedded applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed by ARM Ltd, typically used in embedded systems requiring deterministic real-time performance with low power consumption. The Cortex-M4 architecture sits between the Cortex-M3 (general-purpose MCU) and Cortex-M7 (highest-performance MCU) tiers, with added DSP extensions and an optional single-precision FPU. The STM32F4 family extends this hierarchy into STMicroelectronics' mainstream high-performance line, above the STM32F1 (Cortex-M3) and below the STM32F7 (Cortex-M7) and STM32H7 (Cortex-M7 dual-core). It is widely used for motor control, industrial automation, audio processing, and connected IoT devices. Key features of the STM32F405VGT6J include 1 MB of embedded Flash memory, 192 KB of SRAM, an Adaptive Real-Time (ART) Accelerator that allows 0-wait-state execution from Flash memory at the full 168 MHz, a memory protection unit (MPU), and a rich set of peripherals including USB OTG full-speed and high-speed, CAN 2.0B, SDIO, FSMC, multiple USART/UART/SPI/I2C interfaces, and a 12-bit ADC. The 1.7 V to 3.6 V wide supply voltage range supports both 1.8 V and 3.3 V I/O domains with internal LDOs and a POR/PDR/PVD power-on-reset block. Typical applications include industrial motor drives, three-phase inverters, PLCs, USB audio devices, barcode scanners, alarms, video intercoms, HVAC controllers, GPS trackers, and consumer wearables. The combination of DSP/FPU, large SRAM, USB HS, and Ethernet MAC (where present on pin-compatible F407 parts) makes this MCU well suited as a system controller. When designing with this device, ensure the 100-LQFP PCB layout dedicates adequate copper to the exposed thermal pad for heat dissipation under sustained DSP load, and place the 4.7 uF VDD bypass capacitors as close as possible to each VDD/VDDA pin. Use ST-Link/V2-1 or a SEGGER J-Link for firmware debug; the on-chip DFU bootloader over USB FS allows field firmware updates without an external programmer. This page synthesizes verified distributor pricing, pin-compatible STM32F405/407/415 drop-in alternatives, and practical design notes for high-performance Cortex-M4 designs that are not consolidated on the ST datasheet alone.

USD $8,10 En stock

STM32F405VGT6TR

STM32F405VGT6TR - 168MHz ARM Cortex-M4F MCU | STMicroelectronics (Tape & Reel)

The STM32F405VGT6TR is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4F core with floating-point unit (FPU). It operates at up to 168 MHz, delivering 210 DMIPS and 1.25 DMIPS/MHz, making it suitable for demanding applications such as motor control, medical equipment, and industrial automation. The device integrates 1 MB of flash memory and 192 KB of SRAM, along with a rich set of peripherals including multiple 12-bit ADCs, DACs, timers, and communication interfaces. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of countless electronic devices, from automotive engine control units to consumer electronics. The STM32F405VGT6TR belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs. This family is widely used in industrial, consumer, and IoT applications due to its performance, low power consumption, and extensive ecosystem. Key features of the STM32F405VGT6TR include a 168 MHz ARM Cortex-M4F core with FPU, 1 MB flash, 192 KB SRAM, and a comprehensive set of peripherals: three 12-bit ADCs (up to 24 channels), two DACs, 12 general-purpose timers, and multiple communication interfaces (USART, SPI, I2C, CAN, USB OTG, Ethernet). The device also features a memory protection unit (MPU), a true random number generator (RNG), and a cryptographic acceleration cell for AES, DES, and 3DES. These features make it a versatile choice for complex embedded applications. The STM32F405VGT6TR is manufactured using a 90nm process technology, which balances performance and power efficiency. The core operates at 1.8V to 3.6V, with a wide temperature range of -40°C to +85°C (or +105°C for the VGT6 variant). The device supports various low-power modes, including Sleep, Stop, and Standby, enabling battery-powered applications. The rich peripheral set and high clock speed allow for real-time control and signal processing, making it ideal for applications such as motor control, power conversion, and audio processing. Typical applications include industrial motor control, medical monitoring devices, consumer electronics, and IoT gateways. The STM32F405VGT6TR is also popular in drone flight controllers and robotics, where its processing power and peripheral integration are essential. The device is supported by ST's comprehensive development ecosystem, including the STM32CubeMX configuration tool, HAL libraries, and a wide range of development boards. When designing with the STM32F405VGT6TR, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin should be filtered with a ferrite bead and a 1uF capacitor to reduce analog noise. The BOOT0 pin must be configured correctly for the desired boot mode, and the NRST pin should have a 100nF capacitor to ground for reliable reset. Pay attention to the maximum junction temperature (125°C) and ensure adequate thermal management for high-current applications.

USD $8,10 En stock

STM32F405VGT6V

STM32F405VGT6V - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F405VGT6V is a 32-bit ARM Cortex-M4 microcontroller operating up to 168 MHz, with 1 MB of Flash memory and a 100-LQFP 14 x 14 mm package. It combines an FPU, DSP instructions, connectivity peripherals, and extensive embedded-control resources for industrial, communications, audio, and consumer applications. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and interface controllers on one device. The STM32F4 Series belongs to the STM32 family of 32-bit embedded processors, providing higher performance and richer connectivity than basic 8-bit or 16-bit control devices. The STM32F405VGT6V uses an ARM Cortex-M4 32-bit RISC core with an FPU. Its advertised operating frequency reaches 168 MHz, while 1 MB of Flash provides room for firmware and application code. The part is identified as an STM32F4 Series microcontroller and is available in a 100-LQFP package. Connectivity and control are central to this device family. STMicroelectronics describes the STM32F405xx family as a high-performance Arm Cortex-M4 platform, and distributor records identify the STM32F405VGT6V as a 32-bit microcontroller with a 1 MB Flash configuration. Exact peripheral availability, electrical limits, memory details beyond the verified values, and package pin assignments should be confirmed in the manufacturer datasheet. Typical uses include industrial automation, motor and motion control, communications equipment, audio signal processing, and connected embedded products. The Cortex-M4F architecture supports floating-point and DSP-oriented workloads, while the 168 MHz operating frequency provides headroom for real-time control and multiple peripheral functions. For PCB design, use the 100-LQFP footprint and verify every power, ground, clock, reset, and I/O connection against the official pinout. Do not infer compatibility from the STM32F405 family name alone; exact suffix, temperature grade, memory option, and peripheral configuration must be checked. This page combines verified distributor specifications, manufacturer-family information, application guidance, pricing placeholders where necessary, and drop-in alternatives only when package and parametric compatibility can be substantiated.

Devis En stock

STM32F405VGT6W

STM32F405VGT6W - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F405VGT6W is a 32-bit ARM Cortex-M4 microcontroller with a 168 MHz maximum frequency, 1 MB of flash memory, and a 100-lead LQFP package measuring 14 x 14 mm. The device combines a Cortex-M4 processor with an integrated floating-point unit and the ART Accelerator, which supports zero-wait-state execution from flash according to the cited family documentation. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces. Within the hierarchy of embedded semiconductors, the STM32F4 family belongs to the ARM Cortex-M microcontroller class and provides real-time control capabilities for industrial, communications, audio, and consumer products. Its 32-bit architecture and DSP-oriented peripherals make it suitable for systems that need more processing capability than an 8- or 16-bit controller. The verified distributor listing identifies a 1 M x 8 flash organization, 32-bit ARM Cortex-M4 core, and 168 MHz operating frequency. The family documentation also identifies an FPU, ART Accelerator, memory protection unit, and performance of up to 210 DMIPS. The W suffix denotes the supplied temperature or product-grade variant, but the exact suffix-specific temperature and qualification details were not provided in the verified data and therefore require confirmation from the manufacturer datasheet. Typical applications include industrial automation, networked embedded controllers, audio and digital signal processing, motor control, communications equipment, and consumer products. The 1 MB flash capacity provides more program storage than many entry-level Cortex-M devices, while the Cortex-M4 DSP instruction set and FPU can reduce processing overhead in filtering, control, and signal-analysis tasks. Firmware development should account for the device's memory map, interrupt priorities, clock configuration, and peripheral pin multiplexing. A key design consideration is package-level decoupling and signal integrity. Place the required power, reset, and bypass connections according to the manufacturer hardware guidelines, and verify the exact pin assignments and exposed thermal requirements before layout. Because the supplied evidence is distributor and family-document data rather than a complete target-specific electrical table, unverified voltage, current, temperature, and peripheral values are marked for data completion rather than inferred. This page combines verified distributor pricing and availability references, family-level technical context, application guidance, and strict same-package alternative screening. It is intended to support engineering selection and sourcing while clearly separating confirmed values from parameters that still require target-specific manufacturer documentation.

Devis En stock

STM32F405VGT7

STM32F405VGT7 - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STMicroelectronics STM32F405VGT7 is an ARM Cortex-M4 32-bit microcontroller operating up to 168 MHz, with 1 MB of Flash memory and a 100-LQFP 14 x 14 mm package. The verified distributor description also identifies the part as a 3.3 V STM32F4-series MCU with advanced connectivity and encryption features. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The STM32F4 family belongs to the embedded-processing hierarchy: ARM Cortex-M4 core, 32-bit microcontroller, embedded controller, and semiconductor. This classification places the device between simple fixed-function controllers and higher-level application processors, making it suitable for real-time control, communications, data acquisition, and signal-processing systems. The STM32F405VGT7 combines a 1 M x 8 Flash configuration with a maximum clock frequency of 168 MHz. The Cortex-M4 core includes floating-point and DSP capabilities according to the verified STM32F405 family data. The device is associated with USB OTG high-speed and full-speed, Ethernet, 17 timers, three ADCs, 15 communication interfaces, and camera support, as stated in the verified datasheet summary. These peripherals enable consolidated control functions without requiring several discrete interface devices. Its 100-LQFP package provides a large pin count compared with smaller MCU packages, supporting broad access to GPIO and mixed-signal resources. The verified data specifies a 14 x 14 mm package, but individual pin names, electrical limits, memory sizes beyond the stated Flash value, and absolute maximum ratings were not provided and therefore require manufacturer-document confirmation before PCB release. Typical applications include industrial automation, communications equipment, USB and Ethernet-connected embedded systems, motor and motion control, instrumentation, and camera-enabled embedded products. The 168 MHz Cortex-M4 core is useful for control loops and signal-processing workloads, while the listed USB, Ethernet, timer, and ADC resources support connected measurement and automation designs. Design should preserve the STM32F4 power, clock, decoupling, and decoupling-pin requirements from the manufacturer datasheet. Firmware migration to another STM32F4 device must verify package pin assignment, clock tree, peripheral availability, memory map, startup code, and board-level connectivity. This page synthesizes verified distributor data and explicitly marks specifications that were not available instead of estimating them.

Devis En stock

STM32F405ZGT6

STM32F405ZGT6 - ARM Cortex-M4F MCU 168MHz 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F405ZGT6 is a high-performance ARM Cortex-M4F based microcontroller with floating-point unit (FPU) operating at up to 168 MHz. It features 1 MB of Flash memory and 192 KB of SRAM, making it suitable for complex real-time applications. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body and 0.5 mm pitch, providing ample I/O for connectivity and control. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F405ZGT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. These devices are widely used in industrial control, consumer electronics, and IoT applications due to their balance of performance, power efficiency, and peripheral integration. Key features include a 168 MHz CPU with DSP instructions and FPU, 1 MB Flash, 192 KB SRAM, and a comprehensive set of peripherals: three 12-bit ADCs, two DACs, multiple timers, USART, SPI, I2C, USB OTG FS/HS, Ethernet MAC, and camera interface. The device supports a supply voltage range of 1.8V to 3.6V and operates over -40°C to +85°C. It includes a memory protection unit (MPU), embedded trace macrocell (ETM), and a wide range of communication interfaces. The STM32F405ZGT6 is built on a 90nm process technology, offering high performance with low power consumption. The ART Accelerator™ enables zero-wait-state execution from Flash, maximizing throughput. The FPU accelerates mathematical computations, which is critical for digital signal processing and motor control algorithms. The device also features a true random number generator (RNG) and a cryptographic acceleration cell for secure applications. Typical applications include industrial motor control, medical equipment, consumer electronics, IoT gateways, and audio processing. The rich peripheral set and high clock speed make it ideal for applications requiring real-time responsiveness and complex algorithms. For example, in motor control, the advanced timers generate PWM signals with dead-time insertion, while the ADCs sample current and voltage feedback for closed-loop control. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors close to each VDD pin and a bulk capacitor. The VDDA pin must be connected to a clean analog supply, and VREF+ should be filtered to achieve accurate ADC conversions. The BOOT0 pin configuration determines the boot source, and NRST requires a pull-up resistor and capacitor for reliable reset.

USD $8,10 En stock

STM32F405ZGT6J

STM32F405ZGT6J - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F405ZGT6J is a 32-bit Arm Cortex-M4 microcontroller with up to 168 MHz operating frequency, 1 MB of Flash memory, and a 144-LQFP package. It belongs to the STM32F4 series and combines a single-precision floating-point unit, DSP instructions, advanced connectivity, and extensive peripheral integration for demanding embedded-control designs. The verified product data identifies 2.5 V and 3.3 V supply options, while detailed electrical limits must be taken from the manufacturer datasheet. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication peripherals, timers, analog functions, and power-management blocks. The Cortex-M4 core uses the Arm RISC architecture and provides deterministic instruction execution suitable for real-time control. STM32F405 devices extend this architecture with floating-point and DSP capabilities, making them more suitable than basic Cortex-M devices for signal processing, communications, audio, and motor-control workloads. Key verified attributes include an Arm Cortex-M4 32-bit RISC core, operation up to 168 MHz, 1 MB Flash storage, and a 144-LQFP package. The family documentation also identifies a single-precision FPU and a full set of DSP instructions. These resources allow developers to combine control-loop processing with higher-level connectivity and data-handling functions without requiring a separate processor for every task. The J suffix in the MPN is retained exactly as supplied; package, temperature, and ordering-code details should be confirmed against the ST product page before production release. Typical applications include industrial automation, communications equipment, audio and digital signal processing, embedded networking, motor control, and connected industrial equipment. The STM32F4 family is especially relevant when a design needs more performance and memory than a small general-purpose MCU while retaining a broad peripheral ecosystem. Firmware development can use the STM32 toolchain and ecosystem, but exact debugger, library, and board compatibility must be verified for the selected development platform. A key design consideration is package and pin planning. The 144-LQFP footprint provides many external I/O options but requires careful escape routing, decoupling, ground-plane management, and signal-integrity review. Do not infer every peripheral, electrical limit, pin function, or operating-temperature grade from distributor summaries; consult the official STMicroelectronics datasheet and product page for the complete device-specific specification. This page distinguishes verified headline parameters from values that require confirmation and does not invent missing technical data.

Devis En stock

STM32F405ZGT6V

STM32F405ZGT6V - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F405ZGT6V is a 32-bit Arm Cortex-M4 microcontroller with single-precision floating-point and DSP instructions, operating up to 168 MHz, with 1 MB of Flash memory, in a 144-LQFP 20 x 20 mm package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces. The STM32F4 family belongs to the embedded-control hierarchy: Arm Cortex-M4 processor → STM32 microcontroller → embedded processing system. Its DSP and floating-point capabilities make it suitable for real-time control, data acquisition, communications, and signal-processing tasks. Key verified attributes include an Arm Cortex-M4 32-bit RISC core, up to 168 MHz operating frequency, 1 MB of Flash memory, and a 144-LQFP package measuring 20 x 20 mm. The Cortex-M4 core also supports single-precision data-processing instructions and memory protection according to the manufacturer datasheet. The target part belongs to the STM32F405xx family, whose processing performance and integrated feature set target high-performance embedded applications. Its exact RAM capacity, supply-voltage range, peripheral configuration, temperature grade, and electrical limits are not supplied in the verified excerpts and are therefore not asserted here. Typical design uses include industrial automation, communication equipment, audio and digital signal processing, motor or power-control systems, and connected embedded products. The STM32F405ZGT6V is also relevant when a design benefits from a high-pin-count package and more peripheral connectivity than smaller STM32 variants. When designing around this MCU, verify the complete pin assignment, alternate-function mapping, power requirements, decoupling requirements, clock tree, and memory configuration against the official STM32F405xx/STM32F407xx datasheet. Do not infer unverified electrical limits or substitute a different package variant without checking its footprint. This page combines verified manufacturer and distributor information with practical selection, sourcing, and design guidance; it also clearly identifies parameters that require confirmation from the full datasheet.

USD $5,77 En stock

STM32F405ZGT6W

STM32F405ZGT6W - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F405ZGT6W is a 32-bit Arm Cortex-M4 microcontroller operating up to 168 MHz, with 1 MB of Flash memory and a 144-pin LQFP 20 x 20 mm package. It combines a single-precision floating-point unit, DSP instructions, advanced connectivity, and extensive peripheral integration for embedded control applications. The W suffix identifies the specified temperature and grade option, while G denotes the 1 MB Flash configuration and Z the 144-pin package. A microcontroller is a programmable system-on-chip used to acquire sensor data, execute control algorithms, manage communications, and supervise power and peripheral functions. The STM32F4 series belongs to the broader embedded MCU hierarchy and uses the Arm Cortex-M4 processor architecture. That architecture is appropriate for real-time embedded workloads because it combines efficient instruction execution, hardware floating-point support, deterministic interrupt handling, and a broad software ecosystem. Key verified features include a 32-bit Cortex-M4 core, operation up to 168 MHz, and 1 MB of Flash organized as 1M x 8. The core supports Arm single-precision data-processing instructions and DSP instructions, while the FPU accelerates suitable control and signal-processing workloads. Distributor listings identify the device as an advanced-connectivity STM32 family member with encryption capability, although detailed peripheral counts and electrical limits require consultation of the complete manufacturer datasheet. The STM32F405ZGT6W is positioned for industrial embedded systems, connected control equipment, audio and communication modules, human-interface systems, and real-time signal-processing controllers. Its 1 MB Flash capacity accommodates larger embedded applications than base STM32 devices with smaller memory, while the 144-pin package exposes a broad selection of GPIO and peripheral connections. Package pin assignment, alternate functions, clock limits, and peripheral availability must be checked against the exact pin and variant tables before PCB release. For power and layout planning, designers should follow the manufacturer recommendations for decoupling, clock routing, analog grounding, high-speed signals, and unused pins. The large LQFP package is easier to inspect and solder than a fine-pitch BGA, but its 144 leads still demand careful fanout, ground-plane continuity, and assembly planning. The exact operating-voltage range, temperature range, GPIO current, flash endurance, package dimensions, and lifecycle state are not supplied in the verified excerpts and are therefore recorded as data-needed rather than inferred. This page combines manufacturer identification, distributor availability, verified core and memory specifications, procurement context, and engineering-oriented selection guidance. It also distinguishes true same-footprint drop-in alternatives from parts that may only be broadly similar, helping procurement and engineering teams make a safer decision for STM32F405ZGT6W designs.

USD $6,97 En stock

STM32F405ZGT7

STM32F405ZGT7 - 168MHz Cortex-M4 1MB Flash MCU | ST

STMicroelectronics STM32F405ZGT7 is an ARM Cortex-M4 32-bit RISC microcontroller operating up to 168 MHz, with an ART Accelerator, DSP instructions, and a single-precision floating-point unit, housed in an LQFP-144 package. The device provides 1 MB of Flash memory and is positioned for high-performance embedded control applications requiring substantial processing performance and peripheral integration. A microcontroller is a programmable semiconductor system containing a CPU core, memory, peripherals, and interface circuitry. STM32F4 devices belong to the Arm Cortex-M microcontroller hierarchy and combine real-time control capability with digital signal processing and floating-point acceleration. The STM32F405ZGT7 is therefore useful when a design needs more general-purpose processing than a small low-power MCU while retaining integrated embedded control. The Cortex-M4 core supports single-precision FPU and DSP instructions, while the ART Accelerator enables zero-wait-state execution from Flash. The verified manufacturer material identifies the family as operating up to 168 MHz and the DigiKey listing identifies this exact device as a 32-bit, 168 MHz, 1 MB Flash microcontroller in a 144-LQFP package. These features make it suitable for motor-control firmware, industrial automation, communications gateways, and connected embedded equipment. The STM32F405 family is associated with high-performance STM32F4 designs and includes extensive peripheral connectivity, but individual peripheral availability, voltage limits, memory-map details, and electrical operating conditions should be checked in the official datasheet for the exact ordering code. The LQFP-144 package also requires a PCB footprint with adequate fan-out, routing space, and assembly capability. For design selection, prioritize the verified 168 MHz operating frequency, 1 MB Flash configuration, and LQFP-144 footprint. Firmware compatibility depends on the selected peripheral set, clock configuration, package pin assignment, and validation against the complete STM32F405xx/STM32F407xx datasheet. This page combines verified distributor and manufacturer information with engineering guidance. Pricing, inventory, lifecycle status, package details, and replacement decisions should be reconfirmed against current distributor and manufacturer records before production release.

USD $16,00 En stock

STM32F407IEH6

STM32F407IEH6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F407IEH6 is a 32-bit Arm Cortex-M4 microcontroller with FPU and DSP support, operating up to 168 MHz and packaged in a 176-ball-plus-25-ball UFBGA measuring 10 mm by 10 mm. It provides 512 KB of Flash memory and 192 KB of SRAM for firmware, control logic, communications, and real-time signal processing. The MCU also integrates an Ethernet MAC and camera interface according to the verified product references. A microcontroller is a programmable semiconductor system that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32F4 MCU family belongs to the embedded-microcontroller hierarchy, where an Arm Cortex-M4 RISC core executes real-time control algorithms. Its hardware peripherals offload tasks that would otherwise burden the CPU, making the platform suitable for connected industrial, communications, audio, and embedded control products. Key features include the 168 MHz maximum core frequency, single-cycle multiplication, DSP instructions, an FPU, and the ART Accelerator for zero-wait-state Flash execution. The verified references also identify a memory protection unit and up to 210 DMIPS, or 1.25 DMIPS/MHz with Dhrystone 2.1. These features support responsive control loops and arithmetic-intensive firmware while preserving deterministic peripheral access. The STM32F407IEH6 belongs to the STM32F407 high-performance family. Its integrated Ethernet MAC supports network-connected equipment, while the camera interface suits embedded imaging and vision systems. The combination of large embedded memory and a high-speed CPU is also valuable for audio processing, industrial gateways, and multifunction control boards that need fewer external components. Typical uses include industrial automation, Ethernet gateways, camera-based inspection, audio controllers, communications equipment, and real-time embedded systems. Firmware portability requires checking peripheral assignments, pin multiplexing, startup support, clock configuration, and memory-map compatibility whenever moving between STM32 variants. The manufacturer product page and datasheet should govern final design decisions. When designing the PCB, follow the manufacturer's land pattern, ball assignment, decoupling, and routing guidance. Keep high-speed clocks and communication signals short, provide clean references for analog interfaces, and validate power sequencing before production. Because the exact pin list, electrical limits, and package drawing are not included in the supplied search extract, consult the official STM32F407IEH6 documentation before layout release. This page consolidates the verified distributor identity, memory and processor specifications, procurement links, family context, and practical replacement considerations. It adds engineering guidance beyond a basic distributor listing while clearly separating verified values from documentation that must still be checked during design qualification.

Devis En stock

STM32F407IEH6TR

STM32F407IEH6TR - 168MHz Cortex-M4 512KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F407IEH6TR is a 32-bit Arm Cortex-M4 microcontroller with FPU and DSP support, operating up to 168 MHz and packaged in a 176-ball-plus-25-ball UFBGA measuring 10 mm by 10 mm. It provides 512 KB of Flash memory and 192 KB of SRAM for firmware, control logic, communications, and real-time signal processing. The MCU also integrates an Ethernet MAC and camera interface according to the verified product references. A microcontroller is a programmable semiconductor system that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32F4 MCU family belongs to the embedded-microcontroller hierarchy, where an Arm Cortex-M4 RISC core executes real-time control algorithms. Its hardware peripherals offload tasks that would otherwise burden the CPU, making the platform suitable for connected industrial, communications, audio, and embedded control products. Key features include the 168 MHz maximum core frequency, single-cycle multiplication, DSP instructions, an FPU, and the ART Accelerator for zero-wait-state Flash execution. The verified references also identify a memory protection unit and up to 210 DMIPS, or 1.25 DMIPS/MHz with Dhrystone 2.1. These features support responsive control loops and arithmetic-intensive firmware while preserving deterministic peripheral access. The STM32F407IEH6TR belongs to the STM32F407 high-performance family. Its integrated Ethernet MAC supports network-connected equipment, while the camera interface suits embedded imaging and vision systems. The combination of large embedded memory and a high-speed CPU is also valuable for audio processing, industrial gateways, and multifunction control boards that need fewer external components. Typical uses include industrial automation, Ethernet gateways, camera-based inspection, audio controllers, communications equipment, and real-time embedded systems. Firmware portability requires checking peripheral assignments, pin multiplexing, startup support, clock configuration, and memory-map compatibility whenever moving between STM32 variants. The manufacturer product page and datasheet should govern final design decisions. When designing the PCB, follow the manufacturer's land pattern, ball assignment, decoupling, and routing guidance. Keep high-speed clocks and communication signals short, provide clean references for analog interfaces, and validate power sequencing before production. Because the exact pin list, electrical limits, and package drawing are not included in the supplied search extract, consult the official STM32F407IEH6TR documentation before layout release. This page consolidates the verified distributor identity, memory and processor specifications, procurement links, family context, and practical replacement considerations. It adds engineering guidance beyond a basic distributor listing while clearly separating verified values from documentation that must still be checked during design qualification.

Devis En stock

STM32F407IEH7

STM32F407IEH7 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F407IEH7 is an Arm Cortex-M4 32-bit microcontroller with a 168 MHz maximum operating frequency, 512 KB of Flash memory, and a 176+25 UFBGA package measuring 10 mm by 10 mm. The device belongs to the STM32F4 high-performance microcontroller family and combines a floating-point unit, DSP-oriented processing, extensive connectivity, and analog peripherals for demanding embedded systems. A microcontroller is a compact computer integrated onto one semiconductor package. It executes firmware from embedded Flash memory, reads inputs, controls outputs, and manages communications and timing functions. The STM32F4 family is positioned above basic general-purpose MCUs because its Cortex-M4 core, high clock rate, memory, and peripheral set support more computationally intensive control, communications, audio, and data-acquisition systems. Key verified features include an Arm Cortex-M4 CPU with FPU, operation up to 168 MHz, 512 KB Flash, and support for USB, Ethernet, camera interfaces, and multiple communication peripherals. One secondary datasheet result lists up to 1 MB Flash and 192+4 KB RAM for the broader STM32F407 family, but those values are not treated as target-MPN specifications without device-specific confirmation. The result identifies the STM32F407IEH7 as a 32-bit MCU with 512 KB Flash and a 176+25 UFBGA package. Architecturally, the Cortex-M4 core uses a 32-bit RISC instruction set and includes DSP and floating-point capabilities. The verified STM32F407IE family page confirms the Cortex-M4 core and 168 MHz maximum frequency. This combination supports control-loop work, protocol handling, signal processing, and embedded applications requiring substantially more performance than an entry-level Cortex-M microcontroller. Typical applications include industrial automation, networked control equipment, USB-connected peripherals, Ethernet-enabled embedded systems, motor and motion control, sensor acquisition, and camera or image-oriented designs. The device is particularly suitable when a design requires substantial processing capability and a broad peripheral set in a compact surface-mount package. The key design consideration is package and firmware verification. The target is supplied in a 176+25 UFBGA configuration, so the PCB footprint, exposed-ball assignments, pin multiplexing, and decoupling network must be checked against the exact STMicroelectronics package documentation before layout is released. This page distinguishes the target MPN from related STM32F405, STM32F407, and STM32F417 variants rather than assuming that all family members are interchangeable. This product data consolidates the verified manufacturer identification, distributor specifications, package information, interface references, and source links into an engineering-oriented resource. It is designed to support preliminary component selection while leaving unverified electrical, thermal, pin-level, and lifecycle details explicitly marked for further datasheet confirmation.

Devis En stock

STM32F407IET6

STM32F407IET6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F407IET6 is a 32-bit ARM Cortex-M4 microcontroller with FPU operating up to 168 MHz, 512 KB of Flash memory, and 192 KB of SRAM, housed in a 176-pin LQFP package measuring 24 x 24 mm. It belongs to the STM32F4 high-performance microcontroller family and combines real-time control, communications, and connectivity in one device. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and communication interfaces into a single package. STM32F4 devices provide higher processing performance than basic Cortex-M microcontrollers while retaining low-power embedded-control characteristics. The STM32F407IET6 is therefore positioned between simple microcontrollers and more complex application processors for industrial, communications, audio, and embedded-control designs. The verified data identifies an ARM Cortex-M4 core with FPU, operation up to 168 MHz, 512 KB of Flash, and 192 KB of SRAM. The device also belongs to the STM32F4 series and supports communication and peripheral functions referenced in the retrieved family information. Its 32-bit architecture and floating-point capability suit real-time control loops, signal processing, network-connected equipment, and human-interface systems. The 176-LQFP package provides a large pin count compared with small-outline MCUs, supporting a broader selection of alternate-function, power, ground, debug, and communications connections. Its 24 x 24 mm body is physically larger than compact 48-pin or 64-pin devices, so PCB land patterns and assembly tooling must be designed for the 176-pin package rather than a smaller STM32 variant. Typical applications include industrial automation, Ethernet-connected control systems, USB or serial communications equipment, audio and signal-processing systems, and embedded gateways. The 168 MHz Cortex-M4 core provides more compute headroom than lower-frequency general-purpose MCUs, while the 192 KB SRAM allows larger buffers than basic devices. Designers should still verify clock tree, power, pin multiplexing, memory, and peripheral requirements against the relevant STM32F407 datasheet before layout. This page combines verified distributor and manufacturer-search data, explicit data-gap markers, application guidance, and replacement criteria. It does not infer unverified electrical limits, pin assignments, pricing tiers, or lifecycle claims from generic STM32 family descriptions.

Devis En stock

STM32F407IGH6

STM32F407IGH6 - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F407IGH6 is an ARM Cortex-M4 32-bit microcontroller with a maximum operating frequency of 168 MHz, 1 MB of Flash memory, and up to 192 KB of SRAM in a 176-ball UFBGA package. The STM32F407 family combines real-time signal-processing capability with extensive connectivity and peripheral integration for embedded control designs. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32F4 series belongs to the MCU hierarchy and uses the ARM Cortex-M4 core with floating-point and DSP capabilities. Its architecture is suited to industrial, communications, consumer, and embedded-control systems where deterministic control and multiple peripheral functions are required. Key verified features include an ARM Cortex-M4 processor, 168 MHz maximum frequency, 1 MB Flash, and 192 KB SRAM. The manufacturer family information also identifies an FPU, ART Accelerator, memory protection unit, DSP instructions, and up to 210 DMIPS. These features support responsive control loops, signal processing, and code execution from Flash memory. The STM32F407IGH6 is designed for applications requiring a high-performance 32-bit MCU and substantial embedded memory. Its integrated MCU architecture can consolidate control logic and peripheral functions while reducing the number of discrete components in a design. Exact peripheral counts, voltage limits, temperature ranges, and package pin assignments should be confirmed against the manufacturer datasheet for the selected variant. Typical applications include industrial automation, communications equipment, audio and signal-processing systems, motor-control platforms, and connected embedded devices. The 1 MB Flash capacity provides room for larger firmware, while the 192 KB SRAM supports buffering and real-time workloads. The 168 MHz operating frequency provides additional processing headroom for multitasking and control algorithms. When designing a board around the STM32F407IGH6, verify power sequencing, decoupling, clock configuration, exposed-pad or thermal requirements, and the exact UFBGA land pattern before layout release. Because this is a high-pin-count ball-grid package, careful BGA routing, via-in-pad strategy, and assembly process selection are important. Do not infer pin compatibility from the family name alone; use the manufacturer pinout and package drawing. This page summarizes verified distributor and manufacturer information, including the Cortex-M4 core, 168 MHz frequency, 1 MB Flash, 192 KB SRAM, UFBGA package information, pricing references, and application guidance. It is intended to support component identification, engineering selection, and informed sourcing of the STM32F407IGH6.

Devis En stock

STM32F407IGH6J

STM32F407IGH6J - 168MHz Cortex-M4 MCU, 1MB Flash UFBGA-176 | STMicroelectronics

The STMicroelectronics STM32F407IGH6J is a high-performance ARM Cortex-M4 microcontroller with FPU, delivering 210 DMIPS at 168 MHz, packaged in a 176+25 ball UFBGA (10x10 mm). The device integrates 1 MB of Flash memory and 192 KB of SRAM, with 4 KB of backup SRAM, and includes an ART Accelerator that enables 0-wait-state execution from Flash at full CPU speed. The 'J' suffix denotes the lead-free, industrial temperature grade (-40C to +85C) variant. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for embedded applications that require deterministic real-time performance, DSP capabilities, and energy efficiency. Within ST's portfolio, the M4 sits between the Cortex-M3 (general-purpose MCU) and Cortex-M7 (higher-performance DSP+MCU); it adds a single-precision floating-point unit and DSP instructions while retaining the low interrupt latency and ease of programming of the M3. STM32F4 devices sit in the 'high-performance' tier of the STM32 family, above F1/F0/F3 'mainstream' parts and below F7/H7 'very-high-performance' parts. Key features include a 168 MHz CPU with FPU, 1 MB Flash, 192 KB SRAM (plus 4 KB backup SRAM), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB OTG HS and FS, 10/100 Ethernet MAC, CAN 2.0B, SDIO, FSMC, Crypto/hash processor, and IEEE 1588v2 hardware MAC. The ART Accelerator, combined with a multi-AHB bus matrix, sustains 168 MHz execution even with simultaneous peripheral DMA traffic. Typical applications include industrial motor drives, PLCs, industrial networking gateways, USB/Ethernet-connected HMIs, and audio processing. The hardware FPU makes it well-suited to digital signal filtering and control loops. Multiple 12-bit ADCs and rich communication peripherals (UART/SPI/I2C/CAN/USB/Ethernet) make it a versatile 'system on a chip' for connected industrial nodes. Ensure PCB layout places the UFBGA-176 decoupling capacitors as close to the package balls as possible, since the fine-pitch BGA package requires 4-6 layer PCBs with microvias. For Ethernet applications, the integrated MAC requires an external PHY and 49.9 ohm 1% termination resistors on each differential pair. Always confirm the 'J' industrial temperature range matches your thermal envelope, as commercial ('6') and extended-industrial ('7') variants differ.

USD $9,95 En stock

STM32F407IGH6TR

STM32F407IGH6TR - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F407IGH6TR is an ARM Cortex-M4 32-bit microcontroller with a maximum operating frequency of 168 MHz, 1 MB of Flash memory, and up to 192 KB of SRAM in a 176-ball UFBGA package. The STM32F407 family combines real-time signal-processing capability with extensive connectivity and peripheral integration for embedded control designs. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32F4 series belongs to the MCU hierarchy and uses the ARM Cortex-M4 core with floating-point and DSP capabilities. Its architecture is suited to industrial, communications, consumer, and embedded-control systems where deterministic control and multiple peripheral functions are required. Key verified features include an ARM Cortex-M4 processor, 168 MHz maximum frequency, 1 MB Flash, and 192 KB SRAM. The manufacturer family information also identifies an FPU, ART Accelerator, memory protection unit, DSP instructions, and up to 210 DMIPS. These features support responsive control loops, signal processing, and code execution from Flash memory. The STM32F407IGH6TR is designed for applications requiring a high-performance 32-bit MCU and substantial embedded memory. Its integrated MCU architecture can consolidate control logic and peripheral functions while reducing the number of discrete components in a design. Exact peripheral counts, voltage limits, temperature ranges, and package pin assignments should be confirmed against the manufacturer datasheet for the selected variant. Typical applications include industrial automation, communications equipment, audio and signal-processing systems, motor-control platforms, and connected embedded devices. The 1 MB Flash capacity provides room for larger firmware, while the 192 KB SRAM supports buffering and real-time workloads. The 168 MHz operating frequency provides additional processing headroom for multitasking and control algorithms. When designing a board around the STM32F407IGH6TR, verify power sequencing, decoupling, clock configuration, exposed-pad or thermal requirements, and the exact UFBGA land pattern before layout release. Because this is a high-pin-count ball-grid package, careful BGA routing, via-in-pad strategy, and assembly process selection are important. Do not infer pin compatibility from the family name alone; use the manufacturer pinout and package drawing. This page summarizes verified distributor and manufacturer information, including the Cortex-M4 core, 168 MHz frequency, 1 MB Flash, 192 KB SRAM, UFBGA package information, pricing references, and application guidance. It is intended to support component identification, engineering selection, and informed sourcing of the STM32F407IGH6TR.

USD $9,80 En stock

STM32F407IGH7

STM32F407IGH7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407IGH7 is a 32-bit Arm Cortex-M4 microcontroller with a 168 MHz maximum CPU frequency, 1 MB of Flash memory, and a 176-ball plus 25-ball UFBGA package measuring 10 mm by 10 mm. It combines the Cortex-M4 processor with floating-point capability, extensive connectivity, and substantial embedded memory for demanding control and communications systems. The verified distributor listing identifies the device as an STM32F4-series MCU with a 1 M x 8 Flash organization. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the embedded-computing hierarchy, this device combines an Arm Cortex-M4 core, STM32F4 performance peripherals, embedded Flash and RAM, and industrial connectivity functions. Its 168 MHz operating point supports real-time control workloads, while the integrated networking and communications peripherals reduce the need for external interface devices. Key verified features include the 32-bit Arm Cortex-M4 core, operation up to 168 MHz, 1 MB Flash, and the stated 210 DMIPS performance class in the retrieved family documentation. The family description also identifies an adaptive real-time accelerator, a memory protection unit, DSP capability, three ADCs, 17 timers, USB, Ethernet, and multiple communication interfaces. These features position the part for networked gateways, industrial equipment, motor-control systems, data acquisition, and embedded audio applications. The device uses a compact 176+25 UFBGA package, making board-layout and assembly planning more demanding than a leaded package. Its dense ball array requires careful PCB escape routing, controlled power distribution, and inspection during manufacture. Verify the exact pin allocation, exposed-ball functions, electrical limits, and package drawing from the manufacturer datasheet before layout or a replacement decision. Typical designs use the MCU as the central controller for Ethernet-connected equipment, sensor aggregation, motor control, USB peripherals, camera or image-related control, and industrial automation. The 168 MHz core is useful when the control loop or communications workload exceeds the requirements of a simpler microcontroller, while the 1 MB Flash capacity provides room for application code and data. Interface count and memory availability should still be checked against the exact ordering code. A key design consideration is that a pin-compatible-looking alternative is not automatically a drop-in replacement. Confirm the BGA ball map, power pins, peripheral mapping, clock configuration, memory organization, and package drawing. Also account for software compatibility, peripheral differences, and any changes in electrical characteristics. This page consolidates verified distributor specifications, a strict data-authenticity assessment, practical application guidance, and drop-in alternative qualification. The exact electrical limits, pin map, lifecycle details, pricing tiers, and regulatory declarations are explicitly marked when the supplied evidence does not establish them.

Devis En stock

STM32F407IGT6

STM32F407IGT6 - 168MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F407IGT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, 1MB of Flash, and 192KB of SRAM, housed in a 176-pin LQFP package. It operates at a maximum 168MHz clock with 210 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) performance and integrates DSP instructions plus a single-precision floating-point unit. The device includes an Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash, plus a memory protection unit (MPU). An LQFP, or Low-Profile Quad Flat Pack, is a surface-mount IC package with gull-wing leads on all four sides, optimized for high pin density. Microcontrollers (MCUs) like the STM32F407IGT6 belong to the embedded controller family within the broader semiconductor taxonomy: MCU -> microcontroller -> embedded processor -> integrated circuit. These devices combine a CPU core, memory, and peripherals on a single die, enabling standalone embedded systems in industrial, consumer, and automotive products. Key features of the STM32F407IGT6 include three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, 17 timers, USB OTG HS and FS, an Ethernet MAC with IEEE 1588 support, a CAN 2.0B controller, an SDMMC interface for SD cards, FSMC for external memory, a hardware crypto/hash block, and a camera interface. Up to 140 GPIO pins are exposed across the LQFP-176 footprint. Operating voltage range is 1.8V-3.6V with -40C to +85C industrial temperature range. The Cortex-M4 core with FPU accelerates single-precision math, while the ART Accelerator eliminates Flash wait-states so CPU-bound code runs at full speed. The integrated crypto/hash accelerators (AES, Triple DES, SHA, HMAC) and true random-number generator (TRNG) support secure connectivity without external ICs. The Ethernet MAC with IEEE 1588 hardware timestamping enables industrial-grade real-time networking. Typical applications include industrial motor control, PLCs and industrial gateways, building automation, medical instrumentation, point-of-sale terminals, multi-axis CNC, UAV flight controllers, and graphics-rich HMIs. The combination of high performance, large memory, and rich peripherals makes the STM32F407IGT6 a frequent choice for designs that outgrow Cortex-M3 resources. When designing with this MCU, plan the clock tree carefully because the 168MHz SYSCLK requires careful PLL configuration, and ensure your debugger supports the SWD/JTAG interface. Use the STM32CubeMX tool and the HAL/LL libraries to accelerate firmware bring-up. The 176-pin LQFP is large; routing 140+ GPIOs and the Ethernet/USB differential pairs will dominate PCB area. Plan PCB layers and stackup accordingly. This page synthesizes current distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams evaluate the STM32F407IGT6 for new designs and second-source decisions.

USD $8,40 En stock

STM32F407IGT7

STM32F407IGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F407IGT7 is a 32-bit ARM Cortex-M4 microcontroller with a floating-point unit and DSP capability, operating up to 168 MHz with 1 MB of Flash memory in a 176-pin LQFP package. It combines an ART Accelerator, memory protection features, extensive connectivity, analog conversion, timers, and camera support in one microcontroller platform. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interfaces into a single device. The STM32F4 family belongs to the embedded-processing hierarchy: Cortex-M4 MCU, 32-bit microcontroller, embedded processor, and semiconductor. This device is designed for systems that require real-time control, data acquisition, communications, and moderate processing throughput without using a separate microprocessor. The Cortex-M4 core provides 210 DMIPS in the cited STM32F407IGT7XXX material, while the ART Accelerator enables adaptive execution from Flash memory. The device includes up to 1 MB of Flash, 192 KB plus 4 KB of RAM, USB OTG HS/FS, Ethernet, 17 timers, three ADCs, and 15 communication interfaces according to the supplied datasheet search results. The package is a 176-LQFP measuring 24 mm by 24 mm. Typical applications include industrial automation, Ethernet-connected control equipment, USB peripherals, audio and communications systems, camera-based products, and embedded control platforms. The combination of high clock speed, DSP instructions, floating-point hardware, multiple timers, and flexible serial interfaces supports motor-control, industrial networking, sensor acquisition, and human-interface applications. A key design consideration is selecting the correct clock, power, decoupling, and peripheral configuration for the target PCB. The exact pinout and many electrical limits must be checked against the manufacturer datasheet before layout or firmware deployment. Do not infer missing electrical values from related STM32 variants. This product page consolidates verified distributor specifications, package information, sourcing links, and application-oriented guidance. It also distinguishes true drop-in replacement evidence from merely similar MCUs, helping engineers make package, pinout, memory, and firmware decisions with fewer assumptions.

Devis En stock

STM32F407VET6

STM32F407VET6 - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST

The STMicroelectronics STM32F407VET6 is a high-performance ARM Cortex-M4 32-bit RISC microcontroller operating at up to 168 MHz with single-precision FPU and DSP instructions, integrating 512 KB on-chip program Flash and 192 KB SRAM in a 100-pin LQFP (14x14 mm) surface-mount package. What is a microcontroller? A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile working memory (SRAM), and programmable peripherals to govern specific operations in embedded systems. The STM32F407VET6 belongs to the STM32F4 series built on the ARM Cortex-M4 core with FPU, positioned within the broader hierarchy of 32-bit MCUs - microcontroller in the embedded semiconductor taxonomy used in supply chains. Key features include an on-chip 10/100 Ethernet MAC with IEEE 1588v2, USB 2.0 OTG Full-Speed and High-Speed with PHY, a digital camera interface (DCMI), three 12-bit ADCs with up to 24 channels and 2.4 MSPS, dual 12-bit DACs, an SDIO interface, FSMC for external memory, a crypto/hash peripheral, and a rich set of timers, USART, SPI, I2C, and CAN interfaces. The supply range is 1.8V to 3.6V with operation from -40C to +85C. Technically, the STM32F407VET6 uses a Harvard bus architecture with separate instruction and data buses enabling simultaneous fetch and access, an ART Accelerator with 128-bit Flash prefetch eliminating wait states from Flash, a memory protection unit (MPU), and a nested vectored interrupt controller (NVIC) supporting deterministic real-time behavior. The single-precision FPU accelerates math-intensive firmware for control loops and DSP. Typical applications include industrial motor control and PLCs, networked IoT gateways using the on-chip Ethernet MAC, USB device and host designs, and machine-vision or imaging systems using the DCMI camera interface. Design tip: decouple every VDD pin with 100 nF ceramics plus bulk capacitance, route VDDA/VSSA on a clean analog plane to minimize ADC noise, and place the HSE crystal as close as possible with proper guard rings for stable clocking. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, including LQFP-100 same-footprint cross references and companion MPNs for reference designs.

USD $3,61 En stock

STM32F407VET6TR

STM32F407VET6TR - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST (Tape & Reel)

The STMicroelectronics STM32F407VET6TR is a high-performance ARM Cortex-M4 32-bit RISC microcontroller operating at up to 168 MHz with single-precision FPU and DSP instructions, integrating 512 KB on-chip program Flash and 192 KB SRAM in a 100-pin LQFP (14x14 mm) surface-mount package. What is a microcontroller? A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile working memory (SRAM), and programmable peripherals to govern specific operations in embedded systems. The STM32F407VET6TR belongs to the STM32F4 series built on the ARM Cortex-M4 core with FPU, positioned within the broader hierarchy of 32-bit MCUs - microcontroller in the embedded semiconductor taxonomy used in supply chains. Key features include an on-chip 10/100 Ethernet MAC with IEEE 1588v2, USB 2.0 OTG Full-Speed and High-Speed with PHY, a digital camera interface (DCMI), three 12-bit ADCs with up to 24 channels and 2.4 MSPS, dual 12-bit DACs, an SDIO interface, FSMC for external memory, a crypto/hash peripheral, and a rich set of timers, USART, SPI, I2C, and CAN interfaces. The supply range is 1.8V to 3.6V with operation from -40C to +85C. Technically, the STM32F407VET6TR uses a Harvard bus architecture with separate instruction and data buses enabling simultaneous fetch and access, an ART Accelerator with 128-bit Flash prefetch eliminating wait states from Flash, a memory protection unit (MPU), and a nested vectored interrupt controller (NVIC) supporting deterministic real-time behavior. The single-precision FPU accelerates math-intensive firmware for control loops and DSP. Typical applications include industrial motor control and PLCs, networked IoT gateways using the on-chip Ethernet MAC, USB device and host designs, and machine-vision or imaging systems using the DCMI camera interface. Design tip: decouple every VDD pin with 100 nF ceramics plus bulk capacitance, route VDDA/VSSA on a clean analog plane to minimize ADC noise, and place the HSE crystal as close as possible with proper guard rings for stable clocking. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, including LQFP-100 same-footprint cross references and companion MPNs for reference designs.

USD $3,45 En stock

Sous-catégories

Produits (32725)

STM32F405RGT7TR - 168MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics

STM32F405VGT6 - 168MHz ARM Cortex-M4F MCU | STMicroelectronics

STM32F405VGT6J - 168MHz Cortex-M4 MCU, 1MB Flash | STMicro

STM32F405VGT6TR - 168MHz ARM Cortex-M4F MCU | STMicroelectronics (Tape & Reel)

STM32F405VGT6V - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405VGT6W - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405VGT7 - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405ZGT6 - ARM Cortex-M4F MCU 168MHz 1MB Flash | STMicroelectronics

STM32F405ZGT6J - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405ZGT6V - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405ZGT6W - 168MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32F405ZGT7 - 168MHz Cortex-M4 1MB Flash MCU | ST

STM32F407IEH6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

STM32F407IEH6TR - 168MHz Cortex-M4 512KB MCU | STMicroelectronics (Tape & Reel)

STM32F407IEH7 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

STM32F407IET6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

STM32F407IGH6 - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics

STM32F407IGH6J - 168MHz Cortex-M4 MCU, 1MB Flash UFBGA-176 | STMicroelectronics

STM32F407IGH6TR - 168MHz 1MB Cortex-M4 MCU | STMicroelectronics (Tape & Reel)

STM32F407IGH7 - 168MHz Cortex-M4 MCU | STMicroelectronics

STM32F407IGT6 - 168MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics

STM32F407IGT7 - 168MHz Cortex-M4 MCU | STMicroelectronics

STM32F407VET6 - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST

STM32F407VET6TR - 168MHz Cortex-M4 MCU 512KB Flash LQFP-100 | ST (Tape & Reel)