Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC32MZ2048ECG144T-I/PH - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECG144T-I/PH

PIC32MZ2048ECG144T-I/PH - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECG144T-I/PH is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller delivering up to 200 MHz CPU performance with 2 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package with 0.4 mm terminal pitch. The device integrates an Ethernet MAC, USB 2.0 high-speed PHY/OTG, and a rich set of connectivity peripherals including multiple CAN, UART, SPI, and I2C interfaces. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals on a single die. Within the semiconductor taxonomy, an MCU belongs to the broader category of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC32MZ EF/EG/EC family specifically targets high-performance embedded applications requiring substantial code space, deterministic real-time response, and rich connectivity — sitting between lower-end PIC32MX parts and dedicated application processors. The 'EC' suffix denotes the Ethernet-enabled connectivity sub-family. Key features of the PIC32MZ2048ECG144T-I/PH include 200 MHz/330 DMIPS core performance with a MIPS16e code-compression mode, hardware multiplier/divider, a 12-bit 18 MSPS ADC with up to 42 analog inputs, 8 channels of programmable DMA plus 12 dedicated DMA channels, Peripheral Pin Select (PPS) for flexible function remapping, and an integrated 10/100 Ethernet MAC with MII/RMII interfaces. The part supports an industrial temperature range of -40 C to +85 C. Architecturally, the PIC32MZ2048ECG144 uses a 5-stage pipelined MIPS32 microAptiv M-class core with single-cycle hardware multiply and a tightly-coupled prefetch cache, allowing many instructions to execute in a single clock cycle. Its multi-vector interrupt controller, configurable priority levels, and hardware DMA offload reduce CPU overhead, making the device well-suited for deterministic real-time tasks running alongside Ethernet, USB, and graphics stacks. Typical applications include industrial Ethernet gateways and Modbus/TCP nodes, USB-hosted HMI panels, IoT edge controllers with TLS-secure cloud connectivity, motor-control front-ends, and multi-protocol bridge devices. The wide operating temperature range also supports factory-floor and outdoor equipment. When designing with this part, note that the 144-pin TQFP has a fine 0.4 mm pitch, requiring reflow-capable PCB processes; the PPS feature lets engineers remap most digital peripherals onto alternate pins, but each remap must be configured before the corresponding peripheral is enabled. Always reference the device-specific data sheet for supply, decoupling, and trace-layout requirements. This page synthesizes distributor pricing, drop-in pin-compatible variants, and practical design guidance not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECG144T-I/PL - 200MHz MIPS32 2MB Flash MCU | Microchip
PIC32MZ2048ECG144T-I/PL

PIC32MZ2048ECG144T-I/PL - 200MHz MIPS32 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048ECG144T-I/PL is a high-performance 32-bit microcontroller from the PIC32MZ EC family, integrating a MIPS32 microAptiv core running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-pin LQFP package (20x20 mm). It is supplied in tape-and-reel packaging as indicated by the 'T' suffix, and is rated for the industrial -40C to +85C temperature range with the 'I' suffix. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and a rich set of peripherals such as timers, communication controllers, and ADCs. A 32-bit MCU executes 32-bit instructions per cycle, enabling far higher computational throughput than 8-bit or 16-bit predecessors. Within the embedded hierarchy, PIC32MZ MCUs sit at the top of the Microchip PIC32 line, positioned between general-purpose Cortex-M4/M7 devices and higher-end Cortex-A application processors. Key features of the PIC32MZ2048ECG144T-I/PL include an integrated 10/100 Ethernet MAC, a USB 2.0 High-Speed controller with on-chip PHY, a hardware crypto engine, and a 12-bit ADC running up to 18 Msps. The device also exposes multiple I/O peripherals: six UART/SPI/I2C modules, parallel PMP, and CAN, allowing rich connectivity without external glue logic. Up to 120 GPIO pins are available on the 144-LQFP variant, enabling extensive parallel interfaces for displays, FPGAs, and external memory. Architecturally, the part combines a 5-stage MIPS32 microAptiv core, dual-bank Flash with live-update support, a tightly-coupled prefetch module to hide Flash latency, and a multi-channel DMA engine. The Ethernet MAC with associated MII/RMII interface and the integrated USB 2.0 HS PHY simplify connected designs, while the FPU accelerates DSP-style floating-point math. The part targets applications needing deterministic real-time response combined with rich wired connectivity. Typical applications include industrial Ethernet gateways, EtherCAT/CAN-based motor control nodes, multi-protocol bridges (USB-to-Ethernet, USB-to-CAN), connected HMI controllers, and graphics-enabled human-machine interfaces. The wide peripheral mix also suits point-of-sale terminals, building-automation controllers, and remote telemetry units. When designing with this MCU, allocate careful board space for the 144-LQFP 0.4 mm pitch footprint and ensure adequate decoupling on every VDD/VSS pair per the datasheet. Trace routing for the Ethernet MII/RMII and USB DP/DN pairs must meet 90-ohm differential impedance to pass compliance testing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to support engineers evaluating the PIC32MZ2048ECG144T-I/PL for new designs.

Devis Contact
PIC32MZ2048ECH064-I/MR - 200MHz MIPS MCU 2MB Flash 64-VQFN | Microchip
PIC32MZ2048ECH064-I/MR

PIC32MZ2048ECH064-I/MR - 200MHz MIPS MCU 2MB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MZ2048ECH064-I/MR is a 32-bit MIPS32 microAptiv PIC microcontroller running at up to 200 MHz, integrating 2 MB of Flash and 512 KB of SRAM into a 64-pin VQFN (9x9 mm) MR-package. It belongs to the PIC32MZ Embedded Connectivity (EC) family and ships with on-chip 10/100 Ethernet MAC, USB 2.0 High-Speed PHY, CAN 2.0b, and a crypto engine, making it a single-chip solution for connected industrial designs. Operating from 2.3V to 3.6V across an industrial -40C to +85C temperature range, the device combines high-speed connectivity with deterministic real-time control. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash, RAM, peripherals and interfaces optimized for embedded control. Within the broader taxonomy, PIC32MZ sits inside the MCU category, in the high-performance MIPS32 segment, and is part of Microchip's PIC32 family - a hierarchy that resolves to "semiconductor device -> integrated circuit -> microcontroller -> 32-bit MCU -> MIPS microAptiv PIC32MZ EC". The EC sub-family targets Ethernet-connected embedded nodes that also need rich analog and motor-control peripherals. Key features include a 200 MHz core with 415 DMIPS performance, 2 MB Flash, 512 KB SRAM (with 160 KB ECC-capable data Flash option), a 12-bit 1.2 MSPS ADC with up to 48 analog inputs, nine 16-bit timers/counters, nine compare/PWM outputs, six UART, four SPI, five I2C, and a parallel master port. The dedicated crypto engine supports AES, 3DES, SHA, MD5, HMAC and RNG primitives, offloading secure-channel processing from the CPU. Hardware DSP instructions accelerate FFT and FIR blocks typical of motor-control and audio front-ends. Architecturally, the PIC32MZ EC uses a Harvard-style pipeline with tightly coupled prefetch modules and a 4-way set-associative Flash cache, which keeps the 2 MB program array from throttling the 200 MHz core. The MR-package variant exposes the full 53-pin digital I/O set (including eight pins shared with analog inputs), with trace ports and the full JTAG boundary-scan chain for production test. Typical applications include industrial Ethernet gateways, factory-automation controllers, motor-drive front-ends, multi-axis PWM motion control, USB device/host bridges, and CAN-connected automotive body/ECU nodes. The integrated Ethernet plus crypto engine is a particularly strong fit for secure remote telemetry and fieldbus bridges. Designers should budget for a 4-layer PCB with continuous ground beneath the exposed die-attach pad, and follow Microchip's decoupling guidance: 0.1 uF plus 10 uF ceramic within 5 mm of every VDD/VSS pair. The internal regulator needs a 10 uF bulk on the VCAP pin to remain stable at full 200 MHz operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path from selection to prototype on the PIC32MZ EC family.

Devis Contact
PIC32MZ2048ECH064-I/PT - 200MHz 2MB Flash 64-TQFP MCU | Microchip
PIC32MZ2048ECH064-I/PT

PIC32MZ2048ECH064-I/PT - 200MHz 2MB Flash 64-TQFP MCU | Microchip

The Microchip PIC32MZ2048ECH064-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 2 MB of Flash program memory and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MZ Embedded Connectivity (EC) family and integrates HS USB, Ethernet MAC, CAN, and a rich analog/digital peripheral set, targeting connected embedded applications that demand both performance and connectivity. A 32-bit microcontroller (MCU) is a microprocessor-oriented integrated circuit that combines a high-performance CPU core, Flash program memory, SRAM data memory, and a wide range of on-chip peripherals such as ADCs, timers, communication interfaces, and DMA controllers on a single die. Within the broader taxonomy, PIC32MZ devices sit under MIPS M-Class microcontrollers -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The EC sub-family specifically adds high-bandwidth connectivity peripherals (HS USB, Ethernet, CAN) targeting industrial, IoT, and graphics/HMI use cases where wired connectivity is required. Key features of the PIC32MZ2048ECH064-I/PT include 200 MHz core clock (with 252 MHz MIPS performance per DMIPS scaling), 2 MB dual-panel Flash supporting live update, 512 KB SRAM, integrated 10/100 Ethernet MAC with MII/RMII interface, HS USB 2.0 host/device/OTG, two CAN modules, multiple UART/SPI/I2C channels, a 12-bit ADC with up to 48 channels, and a hardware crypto engine. The device operates from 2.3V to 3.6V and supports an industrial -40C to +85C temperature range. Architecturally, the PIC32MZ2048ECH064 uses the MIPS32 M-Class core with a 5-stage pipeline, hardware multiply/divide, DSP extensions, and a tightly coupled prefetch module that masks Flash latency at high clock rates. The 2 MB dual-panel Flash allows field firmware upgrades without halting the application, while 512 KB SRAM supports data buffering for graphics, audio, or networking stacks. Memory is accessed through a multi-beat eXternal Bus Interface (EBI) and a high-bandwidth RAM-on-chip bus to keep peripheral DMA fed. Typical applications include industrial Ethernet gateways and PLCs, IoT edge nodes with TLS-secured cloud links, USB host/device peripherals, automotive infotainment subsystems, HMI panels with integrated graphics acceleration, and CAN-based motor control nodes. The wide connectivity set plus 2 MB Flash make it well-suited to applications running full TCP/IP stacks plus application code on a single chip. When designing with this part, note that the 64-pin TQFP exposes only a subset of the 120+ pins available on larger variants - design the pinout early and verify Ethernet PHY, USB connector, and CAN transceiver wiring against the device's signal map. Decoupling follows the datasheet: 0.1 uF and 4.7 uF ceramic capacitors as close as possible to each power pin. This page synthesizes the manufacturer datasheet (PIC32MZ EC Family Data Sheet, document 60001191G), distributor pricing from LCSC and Mouser, and a curated set of drop-in alternatives plus practical design notes not consolidated in the datasheet alone.

USD $7,15 En stock
PIC32MZ2048ECH064T-I/MR - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECH064T-I/MR

PIC32MZ2048ECH064T-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECH064T-I/MR is a high-performance 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at 200 MHz, with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates an Ethernet MAC and CAN 2.0B controller, delivering industrial connectivity alongside deterministic real-time performance. The "T" suffix designates tape-and-reel packaging, while the "I" denotes an industrial temperature range of -40C to +85C. What is a PIC32MZ ECH microcontroller? The PIC32MZ ECH family is a high-end extension of Microchip's MIPS-based PIC32 line, built on the microAptiv core with a 5-stage pipeline, DSP extensions, and a double-precision FPU. Compared with the lower-cost PIC32MX and PIC32MZ EF variants, the ECH parts add a larger 2 MB Flash, dedicated Ethernet and CAN peripherals, a High-Speed USB 2.0 OTG controller, and a richer analog subsystem, targeting connected industrial, automotive, and IoT gateway designs. Key features of this part include a 32-bit MIPS32 core with 200 MHz / 330 DMIPS performance, 2 MB on-chip Flash (2M x 8), 512 KB SRAM, 12-bit ADC with up to 5 MSPS, two analog comparators, six digital filters, and a temperature sensor with +-2C accuracy. Communication interfaces include Ethernet MAC, CAN 2.0B, USB 2.0 OTG (High Speed), SPI, I2C, and UART. The 64-pin VQFN package provides an exposed thermal pad for better thermal dissipation in space-constrained layouts. Typical applications include industrial Ethernet gateways, motor control inverters, automotive infotainment controllers, PLC communication modules, and connected IoT edge nodes. Designers choose this device when deterministic Ethernet or CAN connectivity, generous Flash for protocol stacks, and industrial-grade temperature operation are required in a single chip. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECH100-I/PT - 200MHz 32-bit MCU, 2MB Flash | Microchip
PIC32MZ2048ECH100-I/PT

PIC32MZ2048ECH100-I/PT - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2048ECH100-I/PT is a 32-bit MIPS microAptiv core microcontroller running at 200 MHz delivering 330 DMIPS, packaged in a 100-pin TQFP (12x12 mm) for embedded connectivity applications. It integrates 2 MB of flash, 512 KB of SRAM, a 10-bit 500 KSPS 40-channel ADC, dual-panel flash for live update, and a memory management unit for embedded OS execution. What is a PIC32MZ microcontroller? PIC32MZ is Microchip's highest-performance MIPS-based MCU family. The microAptiv core is a DSP-enhanced 32-bit Harvard architecture with single-cycle MAC, saturating and fractional math, and four 64-bit accumulators. microMIPS mode provides up to 35% code compression. It sits in the hierarchy: MIPS32 -> 32-bit MCU -> embedded connectivity MCU -> PIC32MZ family -> system-on-chip class. Key features include four SPI/I2S interfaces for audio, USB, dual CAN, six UARTs, and SQI for high-speed serial flash. The memory management unit supports full RTOS execution. The 10-bit 500 KSPS ADC with 40 channels enables sensor-rich designs. Hardware crypto accelerators and a true random number generator support secure connectivity. Typical applications include industrial automation controllers, automotive infotainment, graphical HMI panels, IoT gateways, and audio processing. The 200 MHz performance and large memory enable on-chip graphics rendering, multi-protocol bridging, and protocol stacks like TCP/IP and USB. Design consideration: route a clean 3.3V analog supply to AVdd pins, isolate from digital Vdd, and decouple with 0.1uF and 10uF capacitors. The TQFP-100 package has a thermal resistance around 50 C/W - adequate for industrial -40C to +85C operation at moderate loads. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ ECH family, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECH124T-I/TL - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2048ECH124T-I/TL

PIC32MZ2048ECH124T-I/TL - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECH124T-I/TL is a high-performance 32-bit MIPS32 microAptiv single-core microcontroller operating at 200 MHz, integrating 2 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. It belongs to the PIC32MZ ECH connectivity sub-series with integrated Hi-Speed USB, Ethernet MAC, CAN-FD and crypto accelerators. The part supports an industrial temperature range of -40C to +85C and is supplied in tape-and-reel packaging. As of 2026-10-04, LCSC lists the unit price starting at $14.20 with stock availability, and DigiKey advertises same-day shipping. A 32-bit microcontroller (MCU) is an embedded processing IC that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, ADC/DAC modules, and I/O. The PIC32 family from Microchip extends the legacy PIC architecture into the MIPS32 domain, occupying the high-performance mid-product tier above PIC24/dsPIC and below specialized application processors. Within the PIC32MZ family, the ECH sub-series adds dedicated connectivity peripherals and a Crypto Engine (CE), positioning it for networked embedded designs that also require hardware-accelerated AES, DES, SHA and true random number generation. Key features of the PIC32MZ2048ECH124T-I/TL include a 200 MHz MIPS32 microAptiv core with 1.56 DMIPS/MHz, a 2 MB (2M x 8) Flash array, 512 KB SRAM, an integrated Floating-Point Unit (FPU) and a dedicated Crypto Engine. The device provides Hi-Speed USB 2.0 On-The-Go, two CAN 2.0b/FlexCAN modules (with optional CAN-FD), 10/100 Ethernet MAC with RMII/MII interface, multiple SPI/I2C/UART peripherals, a 12-bit ADC up to 500 ksps, and a Parallel Master Port (PMP) for external bus connectivity. The PIC32MZ ECH series uses a 5-stage pipelined microAptiv core with hardware multiply/divide, a Memory Protection Unit (MPU) and dual Flash banks for live firmware updates. The 2 MB on-chip Flash is paired with a 128 KB boot Flash and supports an execute-in-place (XIP) cache that boosts effective throughput when running code from external memories via the PMP. Typical applications include industrial Human-Machine Interfaces (HMI), Motor Control, Point-of-Sale (POS) terminals, IoT edge gateways, Graphical Touchscreen Controllers, and Connectivity Bridges (USB-to-Ethernet, USB-to-CAN-FD). The wide peripheral integration makes the part well suited to designs that previously required an MCU plus a discrete communications controller. Designers should plan the PCB layout for the 9 mm x 9 mm VTLA package with attention to the exposed thermal pad for improved thermal performance, route the 50 MHz Ethernet RMII signals with controlled impedance, and ensure decoupling capacitance is placed within a few millimeters of each power pin pair. Internal pull-ups on the I/O bank reduce BOM cost. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone, providing procurement and engineering teams with a single authoritative reference for sourcing the PIC32MZ2048ECH124T-I/TL.

Devis Contact
PIC32MZ2048ECH144T-I/PL - 200MHz 32-bit MCU 2MB Flash LQFP-144
PIC32MZ2048ECH144T-I/PL

PIC32MZ2048ECH144T-I/PL - 200MHz 32-bit MCU 2MB Flash LQFP-144

The Microchip Technology PIC32MZ2048ECH144T-I/PL is a high-performance MIPS32 microAptiv PIC32MZ 32-bit microcontroller running at 200 MHz with 2 MB Flash and 512 KB RAM, housed in a 144-pin LQFP (20x20 mm) package. It integrates 120 I/O lines, 10/100 Ethernet MAC, CAN, USB, and a 12-bit ADC at up to 1.2 Msps, making it a single-chip solution for connected embedded designs. What is a microcontroller (MCU)? A microcontroller is a single-chip computer that integrates a CPU core, memory, and I/O peripherals on one die. The PIC32MZ EC family builds on the MIPS microAptiv core, positioning itself between entry-level 8/16-bit MCUs and higher-end Cortex-M parts. Within the hierarchy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded connectivity MCU. The EC sub-family adds Ethernet, CAN, and Hi-Speed USB without a floating-point unit, distinguishing it from the EF variant which adds FPU and DSP. Key features include 2 MB of Flash program memory, 512 KB of SRAM, a 200 MHz core with 1.65 DMIPS/MHz, hardware crypto engines (AES, DES/3DES, MD5/KS-SHA-1/SHA-256), and a high-speed 12-bit 18-channel ADC. The device also integrates SQI (Serial Quad Interface) for off-chip Flash, eight UARTs, three SPI, four I2C, and dedicated 10/100 Ethernet MAC + CAN 2.0B controllers. Operating voltage is 2.3 V to 3.6 V across the -40C to +85C industrial range, with low-power sleep modes and on-board FRC oscillators that reduce external component count. Typical applications include industrial IoT gateways, automotive telematics, building automation controllers, machine-to-machine (M2M) edge nodes, and networked sensor hubs that require Ethernet plus CAN connectivity. The high core speed suits HMI panels and motor-control reference designs using Microchip's MPLAB Harmony framework, while the large Flash and RAM enable over-the-air (OTA) firmware update stacks. When designing with this part, ensure the 144-LQFP layout reserves adequate copper area for thermal dissipation and uses a 4-layer PCB stack-up to keep the 200 MHz core and Ethernet signals within EMI budgets. Decouple AVDD and VDD domains separately with at least 0.1 uF and 10 uF ceramic capacitors placed within 5 mm of each power pin. Tape-and-reel (T) and tray (no T) variants share identical silicon; the suffix only differs in packing format.

Devis Contact
PIC32MZ2048ECM064T-I/MR - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM064T-I/MR

PIC32MZ2048ECM064T-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048ECM064T-I/MR is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM in a 64-pin QFN (9x9 mm) package. It belongs to the PIC32MZ Embedded Connectivity (EC) family and integrates 10/100 Ethernet MAC, Crypto engine, and CAN peripherals. The device supports an operating voltage range of 2.3V to 3.6V and an industrial temperature range of -40C to +25C. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, volatile and non-volatile memory, and a rich set of peripherals (timers, communication interfaces, ADCs) on a single die. PIC32MZ EC devices sit at the top of Microchip's MIPS-based MCU portfolio, positioned between traditional PIC microcontrollers and high-performance ARM Cortex-M parts. The microAptiv core delivers 252 DMIPS throughput, deterministic interrupt response, and DSP extensions, while remaining code-compatible with legacy PIC32MX firmware. Key features include 53 I/O lines, USB 2.0 high-speed OTG, six UART, three SPI/I2S, four I2C ports, a 12-bit ADC with up to 5 Msps, six PWM outputs, and dedicated crypto blocks supporting AES, DES, SHA, and RNG. The integrated 10/100 Ethernet MAC with RMII/MII interface enables connected industrial applications without an external PHY controller on the bus side. Cache architecture includes 16 KB I-cache and 4 KB D-cache for deterministic code execution from external memory regions. Typical applications include industrial automation controllers, IoT gateways with Ethernet connectivity, secure point-of-sale terminals, automotive infotainment subsystems, and graphics HMI panels. The integrated crypto engine makes it particularly suitable for TLS/DTLS-accelerated connected devices. The wide Flash/RAM headroom (2 MB / 512 KB) supports full embedded web servers, OTA firmware update partitions, and rich graphics libraries. When designing with this device, ensure the 64-pin QFN (MR package) has a proper thermal pad soldered to a 0.5 mm pitch land pattern. Programming/debugging uses the 4-wire JTAG or 2-wire ICSP interface. The -I/MR suffix denotes industrial temperature range and tape-and-reel packaging; for the tray version use PIC32MZ2048ECM064-I/MR (non-T suffix). This page synthesizes distributor pricing, drop-in same-brand alternatives from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECM064T-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP
PIC32MZ2048ECM064T-I/PT

PIC32MZ2048ECM064T-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP

The Microchip Technology PIC32MZ2048ECM064T-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC32MZ microcontroller integrating 2 MB Flash and 512 KB SRAM, running at up to 200 MHz core clock, and housed in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MZ EC family with on-chip 10/100 Ethernet MAC, HS USB 2.0, CAN 2.0b, dedicated crypto accelerator, and a 12-bit 18-channel ADC, targeting connected-embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and ADCs. PIC32MZ EC parts sit in the high-tier of the PIC32 family (32-bit MIPS architecture -> microcontroller -> microcontroller with FPU & DSP -> embedded connectivity MCU -> semiconductor IC). They serve as the main system controller in products that previously required an MPU plus external peripherals. The PIC32MZ2048ECM064 key features include a 32-bit MIPS32 microAptiv core with DSP extensions and single-precision FPU, 200 MHz / 330 DMIPS performance, 2 MB Flash with ECC, 512 KB SRAM, a 12-bit 18-channel 1.2 MSPS ADC, two I²S/SPI for audio, a 10/100 Ethernet MAC, HS USB 2.0 OTG, two CAN 2.0b controllers, an AES/Triple-DES/SHA hardware crypto engine, and 51 dedicated I/O. The 64-pin TQFP package supports industrial -40C to +85C operation. Architecturally, the PIC32MZ EC family uses a 5-stage pipeline MIPS32 microAptiv core with tightly-coupled prefetch module and 16 KB instruction cache backed by the 2 MB Flash, enabling deterministic interrupt latency under heavy peripheral traffic. The crypto accelerator offloads TLS session handshakes, while the dual CAN-FD-ready controllers let two independent CAN 2.0b buses run concurrently for industrial or automotive gateway duties. Typical applications include industrial Ethernet gateways, building-automation controllers, secure POS terminals, medical patient monitors, automotive telematics/CAN nodes, audio bridges, and IoT edge nodes. The device excels in connected embedded designs requiring both deterministic real-time response and high-throughput crypto, networking, or DSP signal processing. When designing with this part, provide separate AVDD/AVSS analog supply pins with LC filtering, route the 50 MHz reference clock with controlled-impedance traces, and reserve space for an external Ethernet PHY plus magnetics. The crypto engine and 2 MB Flash are tuned to TLS 1.2 handshakes - if your design needs TLS 1.3 offload, a more recent PIC32MK/MZ part is preferred. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in PIC32MZ TQFP-64 alternatives that reuse the PCB footprint, and practical design notes not found in the datasheet alone.

Devis Contact
PIC32MZ2048ECM100-I/PT - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM100-I/PT

PIC32MZ2048ECM100-I/PT - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECM100-I/PT is a high-performance 32-bit MIPS32 microAptiv M-Class microcontroller delivering 200 MHz / 330 DMIPS, with 2 MB of dual-panel Flash and 512 KB of SRAM, packaged in a 100-pin TQFP (12x12 mm). It targets secure connected-embedded applications with on-chip Ethernet, Crypto engine, CAN, USB, and SQI interfaces. What is a PIC32MZ microcontroller? The PIC32MZ family is Microchip's high-end MIPS-based MCU lineup, positioned within the broader category of 32-bit microcontrollers (MCU -> embedded microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32MZ). It is designed for applications requiring high computational throughput, large memory, and rich connectivity peripherals, sitting above the PIC32MX and below the SAM E70/S70 Cortex-M7 families in Microchip's portfolio hierarchy. The PIC32MZ2048ECM100 integrates a MIPS32 microAptiv core with DSP-enhanced extensions: four 64-bit accumulators, single-cycle MAC, saturating and fractional math, microMIPS mode for up to 35% code compression, and a Memory Management Unit (MMU) for embedded OS execution. The dual-panel Flash architecture supports live update (firmware can be written to one panel while executing from the other), a critical feature for industrial field-upgradable systems. The 10-bit 500 KSPS 40-channel ADC module provides high-speed analog acquisition across the available I/O pins. Connectivity peripherals include 10/100 Ethernet MAC, two CAN 2.0b controllers, six UART, four I2C, SPI/I2S for audio, PMP for parallel displays, and an SQI interface for high-speed serial Flash. The hardware Crypto engine accelerates AES, DES, 3DES, SHA, MD5, and HMAC, offloading security workloads from the core. The IC operates from a 2.3V to 3.6V supply across the industrial -40C to +85C temperature range, with JTAG and ICSP debug interfaces. Typical applications include industrial Ethernet gateways, secure IoT edge nodes with TLS acceleration, automotive infotainment subsystems, building automation controllers, and medical patient-monitoring equipment requiring deterministic real-time response. The dual-panel Flash also suits asset-tracking devices needing secure over-the-air firmware updates. When designing with this MCU, allocate adequate bypass capacitance (100 nF + 10 uF) near each VDD pin pair, route the 50 MHz Ethernet reference clock with controlled impedance, and use the ICSP pair (PGECx/PGEDx) consistent across programming/debug interfaces. Programming is supported by MPLAB X IDE with the Harmony v3 framework. This page synthesizes distributor pricing, same-family drop-in alternatives, and design considerations not aggregated in the manufacturer datasheet, supporting component engineers sourcing the part for new designs and field replacements.

Devis Contact
PIC32MZ2048ECM100T-I/PF - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM100T-I/PF

PIC32MZ2048ECM100T-I/PF - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECM100T-I/PF is a high-performance 32-bit RISC microcontroller built on the MIPS32 microAptiv M-Class core, delivering up to 200 MHz of CPU clock speed with 2 MB of Flash program memory in a 100-pin TQFP (PF) package. This PIC32MZ EC family device integrates Ethernet, Crypto, and CAN interfaces on-chip, making it a single-chip solution for connected industrial designs. The MPN decoding PIC32-/MZ-2048-EC-M-100-/T-I/PF: 'MZ' = PIC32MZ family, '2048' = 2 MB Flash, 'EC' = Ethernet + Crypto variant, 'M' = microAptiv core, '100' = 100-pin, 'T' = tape and reel, 'I' = industrial -40C to +85C, 'PF' = TQFP package. An MCU (Microcontroller Unit) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals. 32-bit MCUs like the PIC32MZ family occupy the mid-to-high tier of the microcontroller taxonomy, sitting between 8/16-bit MCUs (e.g., PIC16, PIC24) and high-end application processors (e.g., ARM Cortex-A). They target applications that require deterministic real-time performance, large code storage, and rich connectivity peripherals without the cost of an MPU plus external memory. Key features of this part include: 512 KB SRAM, 200 MHz / 330 DMIPS performance, integrated 10/100 Ethernet MAC, hardware Crypto engine (AES, 3DES, SHA, MD5, RNG), two CAN 2.0b controllers, USB 2.0 High-speed OTG, six UART/SPI/I2C peripherals, and a 12-bit ADC at up to 1 MSPS. The 100-pin TQFP package provides ample I/O for parallel bus interfaces, multiple SPI/I2C peripherals, and a 16-bit parallel PMP (Parallel Master Port). The PIC32MZ EC architecture combines a 5-stage pipelined MIPS32 core with a tightly-coupled instruction cache (I-cache up to 16 KB) and a multi-channel DMA controller for low-CPU-overhead data movement. The Crypto engine offloads AES-128/192/256 and SHA-256 from the CPU, which is critical for secure boot and TLS handshake acceleration in Ethernet-connected embedded products. The 200 MHz core with hardware multiply/divide achieves 330 DMIPS and 1.49 DMIPS/MHz efficiency. Typical applications include industrial Ethernet gateways, secure IoT edge nodes with TLS acceleration, building automation controllers, CAN-bridged automotive telematics, point-of-sale terminals, and graphics HMI controllers. The integrated Ethernet MAC with RMII interface supports direct connection to external PHYs such as the LAN8720A or DP83848, eliminating the need for an external network controller. When designing with this device, ensure adequate decoupling: at least one 100 nF ceramic capacitor per VDD pin pair plus a single 4.7 uF bulk capacitor on the main rail. The Ethernet MAC requires a 50 MHz external reference clock or crystal; without a stable reference, RMII throughput and link integrity will degrade. Programming requires MPLAB X IDE with XC32 compiler and a PICkit, ICD, or MPLAB Snap debugger. This page synthesizes distributor pricing as of 2026-10-04, drop-in same-package alternatives from Microchip's own PIC32MZ family, and practical design notes - context not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECM100T-I/PT - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM100T-I/PT

PIC32MZ2048ECM100T-I/PT - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048ECM100T-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC RISC microcontroller running at 200 MHz (330 DMIPS), integrating 2 MB of Flash and a 100-pin TQFP (12x12 mm) package. It belongs to the PIC32MZ Embedded Connectivity (EC) family, engineered for connected industrial and embedded-networking applications requiring cryptographic acceleration, Ethernet, CAN, and rich analog peripherals. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces into one IC. The PIC32MZ EC family is positioned within the broader taxonomy of microcontrollers -> embedded microcontrollers -> 32-bit MCUs -> RISC microcontrollers -> MIPS-based MCUs, providing a meaningful step up in performance and memory versus 8/16-bit alternatives such as PIC16 and PIC24 families. Key specifications include a 200 MHz core, 2 MB Flash, 512 KB SRAM, a 10-bit 500 KSPS 40-channel ADC, four 64-bit accumulators with single-cycle MAC and fractional math DSP support, microMIPS mode for up to 35% code compression, dual-panel Flash for live-update support, and a Memory Management Unit for embedded OS execution. Integrated peripherals include Ethernet, CAN, UART, I2C, PMP, EBI, SQI, Analog Comparators, and SPI/I2S audio interfaces. Architecturally, the device pairs the microAptiv core with on-chip crypto engines (AES, 3DES, SHA, MD5, HMAC) and a true random number generator, making it well-suited to secure connected designs. Industrial temperature grade (-40C to +85C), 3.3V operation, and a peripheral pin select (PPS) subsystem reduce external component count. Typical applications include industrial Ethernet gateways, secure IoT edge nodes, automotive infotainment subsystems, building automation controllers, and graphical HMI panels requiring cryptographic acceleration and large code footprint. Use this MCU when deterministic interrupt response, 2 MB Flash, and Ethernet+CAN connectivity are needed on a single die. When designing, allocate decoupling on each VDD/VSS pair and follow Microchip application note AN833 for in-circuit programming and trace. Note that the PIC32MZ EC family is being migrated to EOL (November 2027); the recommended migration is to the PIC32MZ EF family (e.g., PIC32MZ2048EFG100), which adds a Floating Point Unit and runs up to 252 MHz.

Devis Contact
PIC32MZ2048ECM124-I/TL - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2048ECM124-I/TL

PIC32MZ2048ECM124-I/TL - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECM124-I/TL is a 32-bit MIPS32 microAptiv PIC microcontroller RISC 2048KB Flash 3.3V 124-Pin VTLA EP, operating at up to 200 MHz with 2 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) package. It is part of the PIC32MZ Embedded Connectivity (EC) family and integrates dedicated cryptographic, connectivity, and high-performance peripherals for Industrial, Automotive, IoT, HMI, and Motor Control end products. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The PIC32MZ2048ECM124 sits in the high-performance tier of the 32-bit MCU taxonomy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32 family -> PIC32MZ EC sub-family -> Microchip 32-bit microcontrollers. Compared with 8-bit PIC16/PIC18 and 16-bit PIC24/dsPIC parts, the PIC32MZ EC delivers roughly 5x the compute throughput, deterministic interrupt latency, and on-chip Ethernet plus USB OTG, enabling the consolidation of multiple discrete chips into one device. Key features include a hardware crypto engine (AES, DES, 3DES, SHA, MD5, RNG, HMAC), a 200 MHz / 252 DMIPS / 3.28 CoreMark/MHz core, 2 MB Flash with ECC, 512 KB SRAM, a 12-bit 18 Msps ADC, 9 UART, 6 SPI, 6 I2C, CAN, SQI, EBI/EMI, USB 2.0 OTG with PHY, and 10/100 Ethernet MAC with RMII/MII. The VTLA-124 (9x9 mm) exposed-pad package provides a low thermal resistance path and the 0.5 mm pitch is compatible with standard 4-layer PCB manufacturing. Operating voltage is 2.3-3.6 V and industrial temperature range is -40 C to +85 C for the -I suffix. The device uses the MIPS M-class microAptiv core with a 7-stage pipeline, branch prediction, and tightly-coupled I/D prefetch buffers that sustain high code throughput despite external Flash wait states. The dedicated crypto accelerator offloads AES-256/SHA-256/RNG from the CPU, while dual CAN 2.0b controllers support automotive-grade bus arbitration. The on-chip FPU and DSP extensions further extend signal-processing capability for motor-control loops. Typical applications include industrial IoT gateways, HMI touch panels, motor control drives, secure connected sensors, USB/Ethernet bridges, and automotive infotainment/CAN nodes. The integrated MAC plus crypto makes it well suited to TLS-secured Ethernet endpoints such as Modbus/TCP and EtherCAT slave controllers. The -I grade provides -40 C to +85 C industrial range; for new designs Microchip recommends the PIC32MZ EF family (PIC32MZ2048EFM124) which adds a hardware FPU. When designing with this device, ensure the VTLA exposed pad is soldered to a continuous ground copper pour to meet thermal and electrical performance, and respect the 50 MHz SPI and 50 MHz SQI maximum bus speeds. Programming is supported via MPLAB X IDE with MPLAB Harmony v3 framework, and debug uses the standard 4-wire JTAG or 2-wire ICSP interface. This page synthesizes distributor pricing, same-package alternative MPNs from Microchip and competitors, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC32MZ2048ECM144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip
PIC32MZ2048ECM144-I/PH

PIC32MZ2048ECM144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECM144-I/PH is a 32-bit MIPS32 microAptiv PIC32MZ Embedded Connectivity (EC) microcontroller integrating 2 MB Flash and 512 KB SRAM, operating up to 200 MHz with 3.3 V I/O in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) package. The MIPS32 microAptiv core delivers 330 DMIPS and 3.28 CoreMark/MHz, while dedicated peripherals cover HS USB 2.0 Host/Device/OTG, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b controllers, I2S for audio, and a parallel master port for graphics. According to Microchip datasheet 60001191G, the part is designated Not Recommended for New Designs (NRND); customers should migrate to the pin-compatible PIC32MZ2048EFM144 family that adds a hardware Floating Point Unit and 252 MHz operation. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, Flash program memory, SRAM, and a rich mix of analog and digital peripherals on a single die. Within the embedded taxonomy, the PIC32MZ EC sits in the high-performance connectivity tier between 8/16-bit MCUs and application processors, targeting industrial HMI, audio, and connected-embedded designs. Its hypernyms are MCU, embedded controller, RISC processor; common synonyms are 32-bit MCU and Cortex-M-class competitor (although the core is MIPS, not ARM). Key differentiating features of the PIC32MZ2048ECM144-I/PH include 2 MB dual-bank Live-Update Flash supporting field firmware upgrades without downtime, 512 KB SRAM, 4 KB EEPROM emulation, a 12-bit 18 MSPS ADC with up to 48 analog channels, six UART, four SPI, five I2C, and Peripheral Pin Select (PPS) for flexible signal routing. The 32-channel DMA controller and eight output compare / PWM modules make it well suited to multi-protocol industrial stacks running FreeRTOS, OPENRTOS, or Micrium OS-III. Architecturally, the device combines the microAptiv scalar pipeline with a tightly-coupled SRAM block, dedicated DMA, and a hardware crypto accelerator supporting AES, 3DES, SHA, MD5, and RNG for secure connectivity. Compared with the older PIC32MX series, the EC family delivers roughly 5x the Dhrystone performance and adds Ethernet, CAN, and HS USB on-chip, eliminating external PHY transceivers in many designs and reducing BOM cost. Typical applications include industrial Ethernet gateways, building automation controllers, automotive infotainment/CAN nodes, audio processing with I2S codec interfaces, and graphical HMI panels using the PMP. Engineers should consider migrating to PIC32MZ2048EFM144 (FPU + 252 MHz, pin-compatible) for new designs because the EC family is officially NRND. When designing, observe the 3.3 V supply requirement and use a 24 MHz crystal with the on-chip PLL to derive 200 MHz; the I/O banks tolerate 5 V inputs. Decouple each VDD/VSS pair with 100 nF plus bulk capacitance within 5 mm of the pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page, including parametric comparison against the recommended PIC32MZ EF successor.

Devis Contact
PIC32MZ2048ECM144-I/PL - 32-bit 200MHz MCU, 2MB Flash, 144-LQFP
PIC32MZ2048ECM144-I/PL

PIC32MZ2048ECM144-I/PL - 32-bit 200MHz MCU, 2MB Flash, 144-LQFP

The Microchip Technology PIC32MZ2048ECM144-I/PL is a 32-bit MIPS32 microAptiv PIC32MZ Embedded Connectivity (EC) family microcontroller running up to 200 MHz, integrating 2 MB of Flash and 512 KB of SRAM, and housed in a 144-pin LQFP (20x20 mm) package. The EC family targets connectivity-rich designs requiring Hi-Speed USB, 10/100 Ethernet, CAN, and Crypto engines, with 120 general-purpose I/O pins available on this 144-pin device. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, memory, and peripherals on one die. The PIC32MZ EC family sits within Microchip's higher-tier PIC32 lineup (PIC32MX -> PIC32MZ EC -> PIC32MZ EF -> PIC32MZ DA) of MIPS-based microAptiv devices, which sit in the broader hierarchy of embedded processors -> microcontrollers -> semiconductors -> integrated circuits. EC parts add Ethernet MAC, HS-USB, and a hardware Crypto engine on top of standard PIC32MZ peripherals. Key features include a 200 MHz core with 252 DMIPS throughput, hardware Crypto and RNG blocks, dedicated Audio I2S and Graphics LCD interfaces, 12-bit 5 MSPS ADC, and Hi-Speed USB plus 10/100 Ethernet MAC. The 144-LQFP package provides 120 GPIO, ample for HMI, motor control, and multi-bus industrial nodes. The device uses a 5-stage pipeline MIPS32 microAptiv core with DSP extensions, dual Flash panels for live-update, and a dedicated DMA controller with 8 independent channels. The wide peripheral set is interconnected through a multi-layer bus matrix that prevents bandwidth bottlenecks when Ethernet, USB, and LCD run concurrently. Typical applications include industrial Ethernet gateways, automotive infotainment and telematics (CAN + Ethernet), IoT edge nodes with TLS acceleration, graphical HMI panels with integrated LCD controller, audio playback products using the I2S interface, and PLCs. Microchip's MPLAB Harmony framework provides integrated middleware for these use cases. When designing with this part, ensure the 144-LQFP PCB layout uses four-layer minimum to handle the HS-USB 90-ohm differential pair and the Ethernet RMII/RGMII signals. Decouple VDD with 0.1 uF + 10 uF per pin group, and reserve the dedicated REFCLK pin for the Ethernet PHY. Note that this EC part is NRND; new designs should migrate to the PIC32MZ2048EFM144 (FPU + higher speed) variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-reference pointers to the EF family successor and same-package PIC32MZ EC siblings.

Devis Contact
PIC32MZ2048ECM144T-I/PH - 200MHz 2MB Flash 144-TQFP MCU | Microchip
PIC32MZ2048ECM144T-I/PH

PIC32MZ2048ECM144T-I/PH - 200MHz 2MB Flash 144-TQFP MCU | Microchip

The Microchip Technology PIC32MZ2048ECM144T-I/PH is a 32-bit MIPS32 microAptiv PIC microcontroller delivering 200 MHz / 330 DMIPS performance with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package. It integrates Ethernet MAC, HS USB, CAN, Crypto engine, and a 12-bit 500 KSPS ADC with 48 channels, targeting industrial connectivity and embedded-graphics applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as ADCs, communication controllers, and timers. Within the broader power management and embedded hierarchy, MCUs belong to the integrated-circuit family; within the MCU family, the PIC32MZ EC (Embedded Connectivity) line sits between the lower-end PIC32MX series and the higher-performance PIC32MZ EF (Enhanced) family, optimizing the balance between connectivity peripherals and raw processing throughput. Key features include 200 MHz core clock with single-cycle MAC and dual-panel Flash for live-update field deployments, microMIPS instruction mode for up to 35% code compression, and an integrated Memory Management Unit (MMU) for embedded OS execution. The 120 I/O pins expose CAN, UART, I2C, PMP, EBI, SQI, and SPI/I2S interfaces, enabling direct connection of audio codecs, external memory, and high-speed peripherals without external glue logic. Architecturally, the microAptiv core combines four 64-bit accumulators with saturating and fractional math, optimizing DSP-style workloads such as audio decoding and sensor fusion. The Ethernet MAC, USB 2.0 HS PHY interface, and hardware Crypto engine accelerate secure-connected designs without burdening the CPU with bit-banging or software stacks. The dual-panel Flash supports concurrent read/write, enabling live firmware updates without service interruption. Typical applications include industrial IoT gateways with Ethernet connectivity, secure-connected HMI terminals with TFT-LCD panels, automotive body and infotainment ECUs requiring CAN, and audio playback systems leveraging the I2S interface. The wide peripheral set also suits motor-control and point-of-sale terminals. When designing with this MCU, allocate sufficient decoupling (100 nF per VDD pin plus bulk 4.7 uF) and ensure the 16 MHz primary oscillator trace is short and guarded. Verify voltage tolerances on analog inputs against the 12-bit ADC reference and use the MMU-aware build configuration when targeting RTOS or Linux variants. This page synthesizes distributor pricing, verified drop-in alternatives from Microchip's same PIC32MZ EC family, and practical design notes that complement the manufacturer datasheet.

Devis Contact
PIC32MZ2048ECM144T-I/PL - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM144T-I/PL

PIC32MZ2048ECM144T-I/PL - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECM144T-I/PL is a high-performance 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at up to 200MHz with 2MB of Flash and 512KB of SRAM in a 144-pin LQFP (20x20mm) package. It integrates an on-chip crypto engine, 10/100 Ethernet MAC, CAN, USB 2.0 high-speed OTG, and a 12-bit ADC for embedded connectivity applications. A 32-bit MCU (microcontroller unit) is a single-chip processor that integrates CPU core, memory, and peripherals for embedded control. Within the broader taxonomy, 32-bit MCUs sit between 8/16-bit microcontrollers and application processors; the MIPS32 microAptiv core places PIC32MZ in the high-performance deterministic-RTOS tier, well suited to industrial networking, IoT gateways, and HMI applications where the combination of large Flash, ample RAM, and integrated connectivity peripherals reduces BOM cost. Key features include a 200 MHz / 252 DMIPS core, 2MB Flash with ECC, 512KB SRAM, 120 general-purpose I/O, 12-bit 18 MSPS ADC, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, dual CAN, and dedicated crypto engines (AES, 3DES, SHA, MD5). The integrated peripherals eliminate the need for external connectivity ASICs in typical designs. The PIC32MZ EC family uses a superscalar MIPS32 microAptiv core with a 5-stage pipeline, dual-issue execution, and hardware multiply/divide, achieving 1.57 DMIPS/MHz. The integrated crypto accelerators offload AES/3DES/SHA/MD5 from software, freeing the core for application logic. Typical applications include industrial IoT gateways, Ethernet-connected PLCs, building automation controllers, point-of-sale terminals, and graphical HMI panels. The wide peripheral set and large memory also serve automotive telematics, medical patient monitors, and multi-protocol industrial sensors. When designing, ensure the LQFP-144 PCB layout supports 0.5 mm pitch traces, route analog/digital grounds as a star, and follow Microchip's Ethernet PHY termination guidelines for EMC compliance. Decoupling capacitors must be placed within 3 mm of each VDD pin. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet, offering information gain beyond DigiKey/Mouser listings.

Devis Contact
PIC32MZ2048EFG064-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP
PIC32MZ2048EFG064-I/PT

PIC32MZ2048EFG064-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP

The Microchip PIC32MZ2048EFG064-I/PT is a 32-bit MIPS microcontroller from the PIC32MZ EF family featuring a 200 MHz MIPS Warrior M-class core with hardware FPU and DSP extensions, 2 MB of dual-panel Flash and 512 KB SRAM, integrated in a 64-pin TQFP (10x10 mm) package. It is one of Microchip's highest-performance PIC32 microcontrollers, delivering up to 330 DMIPS while maintaining the deterministic interrupt response expected of the PIC architecture. The 2 MB program memory and 512 KB SRAM place it at the top of the PIC32 line for embedded applications requiring substantial firmware footprint and working memory. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, volatile SRAM, non-volatile Flash, and configurable peripherals on a single die. The PIC32MZ EF family sits at the apex of Microchip's PIC32 line, bridging the gap between traditional 16-bit PIC MCUs and application processors; the 'EF' suffix stands for "Embedded Connectivity with Floating Point Unit" and the family targets industrial, automotive, IoT, graphics/HMI, and motor control segments. The 'G' suffix on this specific MPN indicates the absence of a hardware crypto engine; the related 'H' suffix (not this part) adds hardware AES/SHA acceleration. Key features include a 200 MHz core with single-cycle MAC, four 64-bit accumulators, and an IEEE 754-compliant single/double-precision FPU. Dual-panel Flash with Live Update support enables firmware field upgrades without service interruption. Peripherals include Hi-Speed USB, 10/100 Ethernet MAC, multiple SPI/I2C/UART instances, CAN, a 12-bit ADC, and the Peripheral Pin Select (PPS) system that maps digital functions to any I/O pin - a notable differentiator versus ARM Cortex-M competitors whose pin multiplexing is generally fixed. The architecture is built on a 5-stage pipeline MIPS Warrior M-class core with DSP-enhanced arithmetic and hardware multiply/divide, allowing deterministic real-time performance alongside complex floating-point math. The 2 MB dual-panel Flash enables simultaneous execution from one panel while the other is being reprogrammed. The 64-pin TQFP exposes a subset of the family's I/O compared to 100/144-pin siblings, so designers must weigh memory and pin count against board area. Typical applications include industrial automation controllers, HMI graphics terminals, audio processing systems, motor control inverters, IoT gateways, and automotive body/comfort modules. The combination of high throughput, large memory, rich connectivity peripherals, and PPS flexibility makes this MCU well-suited for situations where a Linux-class SoC would be overkill but an 8/16-bit MCU is under-powered. When designing with this part, pay close attention to power supply sequencing and decoupling because of the multiple internal voltage rails; consult the manufacturer datasheet section on power management before laying out the PCB. The 64-pin TQFP provides ample I/O for typical connectivity designs but limits pin count compared to 100-pin variants. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-09.

Devis Contact
PIC32MZ2048EFG064T-I/MR - 200MHz 32-bit MCU 2MB Flash 64-QFN | Microchip
PIC32MZ2048EFG064T-I/MR

PIC32MZ2048EFG064T-I/MR - 200MHz 32-bit MCU 2MB Flash 64-QFN | Microchip

The Microchip PIC32MZ2048EFG064T-I/MR is a 32-bit MIPS M-Class PIC32MZ microcontroller with 2 MB Flash and 512 KB SRAM, running up to 200 MHz, in a 64-lead QFN (MR) package with exposed pad. Key features include 2 MB of Live-Update Flash memory, 512 KB of SRAM, an integrated Floating Point Unit (FPU), high-speed USB 2.0 (HS USB), 10/100 Mbps Ethernet MAC, 4x SPI, 4x I2C, 6x UART, and a 12-bit ADC with up to 24 analog inputs. The device operates from 2.3V to 3.6V and includes 8 DMA channels for efficient peripheral data movement. This device belongs to the PIC32MZ EF Family of microcontrollers, which are high-performance MIPS-based MCUs designed for industrial, automotive, IoT, graphics (HMI), and motor control applications. The 200 MHz core, paired with the FPU, delivers up to 1.65 DMIPS/MHz and supports DSP instructions for audio processing. The PIC32 ecosystem provides an extensive library of application notes and reference designs. Typical applications include industrial IoT gateways with Ethernet connectivity, automotive HMI displays, motor control inverters, audio processing systems, and graphics-based HMIs. The exposed thermal pad on the QFN-64 package enables improved thermal dissipation in high-utilization designs, while the integrated Ethernet MAC reduces BOM cost for connected embedded products. When designing with this part, ensure the QFN-64 land pattern includes thermal vias under the exposed pad to maintain junction temperature within specifications. The 2 MB Live-Update Flash supports dual-image firmware updates, allowing safe OTA deployments where one partition is the active firmware and the other receives new code. This page synthesizes distributor pricing, drop-in alternatives including the same-family PIC32MZ2048EFG064T-I/PT (TQFP package), and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048EFG064T-I/PT - 2MB Flash 32-bit MCU 200MHz | Microchip
PIC32MZ2048EFG064T-I/PT

PIC32MZ2048EFG064T-I/PT - 2MB Flash 32-bit MCU 200MHz | Microchip

The Microchip Technology PIC32MZ2048EFG064T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core performance with 2 MB of Flash and 512 KB of SRAM in a 64-pin TQFP (PT) package. This flash-based MCU integrates a single-precision hardware Floating-Point Unit (FPU), advanced analog capability, and rich connectivity peripherals including High-Speed USB, 10/100 Ethernet MAC, SQI (Serial Quad Interface), CAN, and multiple UART/SPI/I2C channels, while consuming approximately 113 mA/MHz at full Dhrystone load. A 32-bit microcontroller (MCU) is an embedded processor that combines a CPU core, memory, and peripherals on a single silicon die. The PIC32MZ EF family sits within Microchip's MIPS M-Class hierarchy: PIC32MZ -> MIPS32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared to 8/16-bit MCUs, a 32-bit MIPS core enables deterministic real-time control, large code space for connectivity stacks, and hardware floating-point math without software overhead. Key features include a MIPS32 microAptiv core with MMU and DSP extensions, hardware FPU for IEEE-754 single-precision math, dual-panel Live-Update Flash for in-field firmware upgrades without downtime, a 12-bit 18 Msps ADC with up to 45 analog inputs, multiple CAN-FD nodes, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with RMII/MII, an on-chip crypto accelerator on related variants (none on this 'no Crypto' version), and a dedicated graphics peripheral for TFT/HMI panels. Typical applications include Industrial IoT gateways, Ethernet-connected motor controllers, HMI touch panels, automotive infotainment telematics, and high-throughput medical instrumentation. The 64-pin TQFP (10x10 mm) footprint exposes 53 digital I/O, the full analog channel set, and the high-speed serial mux needed for USB and Ethernet simultaneously. When designing with this device, budget for external 3.3 V LDO headroom, place the 12 MHz HS crystal within 5 mm of OSC1/OSC2, and follow the package-specific decoupling scheme (1 uF + 0.1 uF per VDD/VBAT pair) to keep the FPU integer interference edge within ISO 11452 EMC limits. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC32MZ2048EFG100-E/GJX - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFG100-E/GJX

PIC32MZ2048EFG100-E/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFG100-E/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running up to 200 MHz (330 DMIPS) with 2 MB of dual-panel Flash and 512 KB of SRAM, housed in a 100-pin TFBGA package (7x7 mm). The -E temperature grade and AEC-Q100 qualification make it suited for extended-temperature and automotive-grade designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory, data memory, and peripheral interfaces into one package. The PIC32MZ EF family belongs to the broader taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 family. These devices combine high computational throughput with deterministic interrupt response, making them foundational building blocks for connected, real-time, and graphics-oriented embedded systems. Key features include a hardware IEEE 754-compliant Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math support for DSP workloads, dual-panel Flash for live firmware updates, and a 200 MHz / 330 DMIPS MIPS Warrior M-class core. The part integrates High-Speed USB, Ethernet, multiple SPI/I2C/UART interfaces, 12-bit ADC modules, and graphics/audio peripherals for HMI applications. The "G" silicon designation indicates the standard feature set without cryptographic acceleration or CAN-FD. Typical applications include industrial connectivity gateways, IoT edge nodes, automotive HMI clusters, graphics-driven HMI terminals, and motor-control subsystems. The dual-panel Flash architecture enables fail-safe over-the-air (OTA) firmware upgrades - critical for connected products that must remain updatable in the field without bricking the device. The 100-pin TFBGA package minimises PCB footprint while exposing the full peripheral set. When designing with this device, plan the dual-panel Flash layout so the bootloader (Panel 1) is write-protected and the application image (Panel 2) is upgradeable. Decouple VDD/VUSB with low-ESR ceramic capacitors placed within 3 mm of each supply pin, and follow Microchip's IBIS models for SDRAM interface timing closure. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found on a single distributor product page, accelerating sourcing and design-in for engineers targeting PIC32MZ EF family designs.

Devis Contact
PIC32MZ2048EFG100-I/GJX - 200MHz 32-bit MCU, 2MB Flash, 100-TFBGA | Microchip
PIC32MZ2048EFG100-I/GJX

PIC32MZ2048EFG100-I/GJX - 200MHz 32-bit MCU, 2MB Flash, 100-TFBGA | Microchip

The Microchip PIC32MZ2048EFG100-I/GJX is a 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (330 DMIPS) with 2 MB Flash and 512 KB SRAM, housed in a 100-pin TFBGA (7x7 mm) package. The device integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating and fractional math to accelerate control-loop and signal-processing workloads. A 32-bit microcontroller (MCU) is a programmable processor that combines a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals (ADC, timers, communication controllers) on a single silicon die. The PIC32MZ EF family sits in Microchip's high-performance MCU portfolio alongside the PIC32MM, PIC32MX, and PIC32MK families, targeting embedded connectivity and graphics applications. Within the system hierarchy, an MCU belongs to microcontrollers, embedded processors, semiconductors, and integrated circuits. Key features of this device include a 12-bit 18 MSPS 40-channel ADC, dual-panel Flash supporting live firmware swap, a Memory Management Unit (MMU) for embedded OS use, Hi-Speed USB 2.0, 10/100 Ethernet MAC, SQI (Serial Quad Interface), CAN, I2S/audio, and graphics peripherals. The Harvard architecture provides separate buses for instruction and data fetch, allowing deterministic zero-wait-state execution from Flash under most conditions. Designed for industrial, automotive, IoT, graphics/HMI, and motor control markets, the part supports large graphical user interfaces via its integrated graphics controller and external bus interface. The 100-TFBGA package offers compact 7x7 mm footprint for space-constrained designs while exposing 78 GPIO through peripheral multiplexing. Voltage range is typically 2.3V-3.6V with multiple on-chip regulators for core and I/O rails. Typical applications include HMI panels with TFT-LCD, industrial IoT gateways, motor control drives, audio processing, and Ethernet-connected sensors. When designing, ensure the TFBGA PCB layout uses microvia stacks with 0.4 mm pitch escape routing, and review the family's errata sheet for any device-specific silicon revisions before committing to production.

Devis Contact
PIC32MZ2048EFG100-I/PF - 32-bit 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFG100-I/PF

PIC32MZ2048EFG100-I/PF - 32-bit 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFG100-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering 200 MHz / 330 DMIPS performance with a MIPS Warrior M-class core, integrated IEEE 754 floating-point unit, and 2 MB of Flash plus 512 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The EF family targets connectivity-intensive applications including industrial, automotive, IoT, graphics/HMI, and motor-control end products. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, volatile and non-volatile memory, and a wide array of peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> processors -> logic ICs -> integrated circuits. The PIC32MZ EF family extends the MIPS32 M-class line with deterministic interrupt latency, DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating/fractional math), and dual-panel Flash to enable live firmware updates without downtime. Key features include 2 MB of program Flash with live-update support, 512 KB of SRAM, an integrated FPU, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with MII/RMII, up to 8 UART, 6 SPI, 4 I2C, a 12-bit ADC at 1 MSps with up to 40 channels, and a 9-channel configurable timer/counter. The 100-pin TQFP gives designers 78 user I/O with extensive interrupt-on-change support and a 4-wire MIPS Enhanced JTAG interface. A peripheral pin-select (PPS) matrix remaps most digital functions to nearly any I/O pin. Architecture-wise the device pairs a 5-stage pipeline MIPS Warrior core with a tightly-coupled prefetch buffer and 16 KB instruction cache, achieving 1.6 DMIPS/MHz. Hardware crypto accelerators (when present in the EFH/EFK variants) and the dual-bank Live Update Flash are central to secure field-upgradable designs. Operating voltage is 2.3 V to 3.6 V with industrial-grade -40C to +85C junction support for the -I suffix. Typical applications include industrial automation controllers, IoT gateways with Ethernet/USB, automotive HMI clusters, low-cost graphics terminals with external TFT, and BLDC/PMSM motor drives using the dedicated motor-control PWM. The combination of large memory, hardware FPU, and integrated Ethernet MAC makes it well suited to connected-embedded designs that previously required an external network processor. The automotive-grade E/PF variant supports +125C operation. When designing with this device, verify trace-length matching on Ethernet MII/RMII and provide a clean 3.3 V rail with at least 1 uF of bulk decoupling near every VDD/VSS pair. The Live Update feature needs the dual-panel Flash pair programmed through the ICD/ICSP or in-application programming interface to roll back if a new image fails to boot. Engineers should review the family's pin-out table because the 100-pin device shares most signals with the 64-pin variant except for the bus, graphics, and high-speed parallel I/O. This page combines distributor stock data, parametric drop-in alternatives, and practical PCB design notes that go beyond the manufacturer datasheet's device-overview chapter, helping engineers make procurement and second-source decisions in one place.

Devis Contact