PIC32MZ2048ECG144T-I/PL - 200MHz MIPS32 2MB Flash MCU | Microchip
Référence : PIC32MZ2048ECG144T-I/PL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.65 | $14,65 |
| 10 | $13.42 | $134,20 |
| 100 | $12.18 | $1 218,00 |
| 500 | $11.05 | $5 525,00 |
| 1 000 | $10.2 | $10 200,00 |
PIC32MZ2048ECG144T-I/PL Présentation
What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and a rich set of peripherals such as timers, communication controllers, and ADCs. A 32-bit MCU executes 32-bit instructions per cycle, enabling far higher computational throughput than 8-bit or 16-bit predecessors. Within the embedded hierarchy, PIC32MZ MCUs sit at the top of the Microchip PIC32 line, positioned between general-purpose Cortex-M4/M7 devices and higher-end Cortex-A application processors.
Key features of the PIC32MZ2048ECG144T-I/PL include an integrated 10/100 Ethernet MAC, a USB 2.0 High-Speed controller with on-chip PHY, a hardware crypto engine, and a 12-bit ADC running up to 18 Msps. The device also exposes multiple I/O peripherals: six UART/SPI/I2C modules, parallel PMP, and CAN, allowing rich connectivity without external glue logic. Up to 120 GPIO pins are available on the 144-LQFP variant, enabling extensive parallel interfaces for displays, FPGAs, and external memory.
Architecturally, the part combines a 5-stage MIPS32 microAptiv core, dual-bank Flash with live-update support, a tightly-coupled prefetch module to hide Flash latency, and a multi-channel DMA engine. The Ethernet MAC with associated MII/RMII interface and the integrated USB 2.0 HS PHY simplify connected designs, while the FPU accelerates DSP-style floating-point math. The part targets applications needing deterministic real-time response combined with rich wired connectivity.
Typical applications include industrial Ethernet gateways, EtherCAT/CAN-based motor control nodes, multi-protocol bridges (USB-to-Ethernet, USB-to-CAN), connected HMI controllers, and graphics-enabled human-machine interfaces. The wide peripheral mix also suits point-of-sale terminals, building-automation controllers, and remote telemetry units.
When designing with this MCU, allocate careful board space for the 144-LQFP 0.4 mm pitch footprint and ensure adequate decoupling on every VDD/VSS pair per the datasheet. Trace routing for the Ethernet MII/RMII and USB DP/DN pairs must meet 90-ohm differential impedance to pass compliance testing.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to support engineers evaluating the PIC32MZ2048ECG144T-I/PL for new designs.
Alternatives de remplacement direct pour PIC32MZ2048ECG144T-I/PL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ2048ECG144T-I/PL (même facteur de forme et même empreinte) — différant par Core Architecture, Package, Ethernet, Operating Temperature, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ2048ECG144-I/PL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ1024ECG144-I/PH
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MZ1024ECH144T-I/PL
✅ Remplacement direct✓ En stock
$9.55 / unité
Voir la fiche technique →PIC32MZ1024EFG144-I/PL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MZ1024EFE144-I/PL
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.95 / unité
Voir la fiche technique →PIC32MZ1024ECM144-I/PH
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.95 / unité
Voir la fiche technique →PIC32MZ2048ECG144T-I/PL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv (M-Class) |
| Largeur du bus de données | 32-bit |
| Maximum CPU Frequency | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM | 512 KB |
| Boîtier | 144-LQFP (20x20 mm, 0.4 mm pitch) |
| Type de montage | Surface Mount |
| Supply Voltage (VDD) | 2.2 V to 3.6 V |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Ethernet | 10/100 MAC (MII/RMII interface) |
| USB | USB 2.0 High-Speed with on-chip PHY |
| ADC | 12-bit, up to 18 Msps |
| GPIO Count | Up to 120 (144-LQFP variant) |
| Communication Peripherals | UART, SPI, I2C, CAN, PMP |
| DMA | Multi-channel DMA controller |
| FPU | Hardware Floating Point Unit (M-class) |
| Cryptography | Hardware crypto engine (AES, RNG) |
| Niveau MSL | 3 (per JEDEC J-STD-020, 168 hours) |
| Statut RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes |
Configuration des broches de PIC32MZ2048ECG144T-I/PL
| Broche 1 | RD0 — General purpose I/O / PMP data |
| Broche 2 | RD1 — General purpose I/O / PMP data |
| Broche 3 | RD2 — General purpose I/O / PMP data |
| Broche 4 | RD3 — General purpose I/O / PMP data |
| Broche 5 | RD4 — General purpose I/O / PMP data |
| Broche 6 | RD5 — General purpose I/O / PMP data |
| Broche 7 | RD6 — General purpose I/O / PMP data |
| Broche 8 | RD7 — General purpose I/O / PMP data |
| Broche 9 | VDD — Supply voltage (3.3 V) |
| Broche 10 | VSS — Ground |
| Broche 11 | RF0 — General purpose I/O |
| Broche 12 | RF1 — General purpose I/O |
| Broche 13 | RF2 — General purpose I/O |
| Broche 14 | RF3 — General purpose I/O |
| Broche 15 | RF4 — General purpose I/O |
| Broche 16 | RF5 — General purpose I/O |
| Broche 17 | RF6 — General purpose I/O |
| Broche 18 | RF7 — General purpose I/O |
| Broche 19 | RG6 — General purpose I/O / ETH reference clock |
| Broche 20 | RG7 — General purpose I/O |
| Broche 21 | RG8 — General purpose I/O |
| Broche 22 | RG9 — General purpose I/O |
| Broche 23 | MCLR — Master clear reset (active low) |
| Broche 24 | RG2 — General purpose I/O |
| Broche 25 | RG3 — General purpose I/O |
| Broche 26 | RC1 — General purpose I/O |
| Broche 27 | RC2 — General purpose I/O |
| Broche 28 | RC3 — General purpose I/O |
| Broche 29 | RC4 — General purpose I/O |
| Broche 30 | VDD — Supply voltage (3.3 V) |
| Broche 31 | VSS — Ground |
| Broche 32 | RA0 — General purpose I/O / AN0 |
| Broche 33 | RA1 — General purpose I/O / AN1 |
| Broche 34 | RA2 — General purpose I/O / AN2 |
| Broche 35 | RA3 — General purpose I/O / AN3 |
| Broche 36 | RA4 — General purpose I/O / AN4 |
| Broche 37 | RA5 — General purpose I/O / AN5 |
| Broche 38 | RA6 — General purpose I/O / AN6 |
| Broche 39 | RA7 — General purpose I/O / AN7 |
| Broche 40 | RA8 — General purpose I/O / AN8 |
| Broche 41 | RA9 — General purpose I/O / AN9 |
| Broche 42 | RA10 — General purpose I/O / AN10 |
| Broche 43 | RA11 — General purpose I/O / AN11 |
| Broche 44 | RA12 — General purpose I/O / AN12 |
| Broche 45 | RA13 — General purpose I/O / AN13 |
| Broche 46 | RA14 — General purpose I/O / AN14 |
| Broche 47 | RA15 — General purpose I/O / AN15 |
| Broche 48 | VSS — Ground |
| Broche 49 | RC5 — General purpose I/O |
| Broche 50 | RC6 — General purpose I/O |
| Broche 51 | RC7 — General purpose I/O |
| Broche 52 | RC8 — General purpose I/O |
| Broche 53 | RC9 — General purpose I/O |
| Broche 54 | RC10 — General purpose I/O |
| Broche 55 | RC11 — General purpose I/O |
| Broche 56 | RC12 — General purpose I/O |
| Broche 57 | RC13 — General purpose I/O |
| Broche 58 | RC14 — General purpose I/O |
| Broche 59 | RC15 — General purpose I/O |
| Broche 60 | VSS — Ground |
| Broche 61 | RD8 — General purpose I/O / PMP data |
| Broche 62 | RD9 — General purpose I/O / PMP data |
| Broche 63 | RD10 — General purpose I/O / PMP data |
| Broche 64 | RD11 — General purpose I/O / PMP data |
| Broche 65 | RD12 — General purpose I/O / PMP data |
| Broche 66 | RD13 — General purpose I/O / PMP data |
| Broche 67 | RD14 — General purpose I/O / PMP data |
| Broche 68 | RD15 — General purpose I/O / PMP data |
| Broche 69 | VDD — Supply voltage (3.3 V) |
| Broche 70 | VSS — Ground |
| Broche 71 | RG0 — General purpose I/O / ETH CRS |
| Broche 72 | RG1 — General purpose I/O / ETH COL |
| Broche 73 | RB0 — General purpose I/O / AN32 |
| Broche 74 | RB1 — General purpose I/O / AN33 |
| Broche 75 | RB2 — General purpose I/O / AN34 |
| Broche 76 | RB3 — General purpose I/O / AN35 |
| Broche 77 | RB4 — General purpose I/O / AN36 |
| Broche 78 | RB5 — General purpose I/O / AN37 |
| Broche 79 | RB6 — General purpose I/O / AN38 |
| Broche 80 | RB7 — General purpose I/O / AN39 |
| Broche 81 | RB8 — General purpose I/O / AN40 |
| Broche 82 | RB9 — General purpose I/O / AN41 |
| Broche 83 | RB10 — General purpose I/O / AN42 |
| Broche 84 | RB11 — General purpose I/O / AN43 |
| Broche 85 | RB12 — General purpose I/O / AN44 |
| Broche 86 | RB13 — General purpose I/O / AN45 |
| Broche 87 | RB14 — General purpose I/O / AN46 |
| Broche 88 | RB15 — General purpose I/O / AN47 |
| Broche 89 | VSS — Ground |
| Broche 90 | RE0 — General purpose I/O / PMP data |
| Broche 91 | RE1 — General purpose I/O / PMP data |
| Broche 92 | RE2 — General purpose I/O / PMP data |
| Broche 93 | RE3 — General purpose I/O / PMP data |
| Broche 94 | RE4 — General purpose I/O / PMP data |
| Broche 95 | RE5 — General purpose I/O / PMP data |
| Broche 96 | RE6 — General purpose I/O / PMP data |
| Broche 97 | RE7 — General purpose I/O / PMP data |
| Broche 98 | VDD — Supply voltage (3.3 V) |
| Broche 99 | VSS — Ground |
| Broche 100 | RJ0 — General purpose I/O |
| Broche 101 | RJ1 — General purpose I/O |
| Broche 102 | RJ2 — General purpose I/O |
| Broche 103 | RJ3 — General purpose I/O |
| Broche 104 | RJ4 — General purpose I/O |
| Broche 105 | RJ5 — General purpose I/O |
| Broche 106 | RJ6 — General purpose I/O |
| Broche 107 | RJ7 — General purpose I/O |
| Broche 108 | RJ8 — General purpose I/O |
| Broche 109 | RJ9 — General purpose I/O |
| Broche 110 | RJ10 — General purpose I/O |
| Broche 111 | RJ11 — General purpose I/O |
| Broche 112 | VDD — Supply voltage (3.3 V) |
| Broche 113 | VSS — Ground |
| Broche 114 | RF13 — General purpose I/O |
| Broche 115 | RF12 — General purpose I/O |
| Broche 116 | RG14 — General purpose I/O |
| Broche 117 | RG15 — General purpose I/O |
| Broche 118 | RG12 — General purpose I/O |
| Broche 119 | RG13 — General purpose I/O |
| Broche 120 | RK0 — General purpose I/O |
| Broche 121 | RK1 — General purpose I/O |
| Broche 122 | RK2 — General purpose I/O |
| Broche 123 | RK3 — General purpose I/O |
| Broche 124 | RH0 — General purpose I/O / ETH TX_CLK |
| Broche 125 | RH1 — General purpose I/O / ETH TX_EN |
| Broche 126 | RH2 — General purpose I/O / ETH TXD0 |
| Broche 127 | RH3 — General purpose I/O / ETH TXD1 |
| Broche 128 | RH4 — General purpose I/O / ETH RX_CLK |
| Broche 129 | RH5 — General purpose I/O / ETH RX_DV |
| Broche 130 | RH6 — General purpose I/O / ETH RXD0 |
| Broche 131 | RH7 — General purpose I/O / ETH RXD1 |
| Broche 132 | RH8 — General purpose I/O / ETH RX_ER |
| Broche 133 | RH9 — General purpose I/O / ETH CRS_DV |
| Broche 134 | RH10 — General purpose I/O / ETH MDIO |
| Broche 135 | RH11 — General purpose I/O / ETH MDC |
| Broche 136 | RH12 — General purpose I/O |
| Broche 137 | RH13 — General purpose I/O |
| Broche 138 | RH14 — General purpose I/O |
| Broche 139 | RH15 — General purpose I/O |
| Broche 140 | VSS — Ground |
| Broche 141 | RK4 — General purpose I/O |
| Broche 142 | RK5 — General purpose I/O |
| Broche 143 | RK6 — General purpose I/O |
| Broche 144 | RK7 — General purpose I/O |
Applications typiques
PIC32MZ2048ECG144T-I/PL convient pour 6 applications: Industrial Ethernet Gateway, Multi-Protocol Communication Bridge, Connected Human-Machine Interface (HMI), Building Automation Controller, Point-of-Sale (POS) Terminal, Remote Telemetry / IoT Gateway.
Industrial Ethernet Gateway
The PIC32MZ2048ECG144T-I/PL fits industrial Ethernet gateways because of its integrated 10/100 Ethernet MAC with MII/RMII interface and 200 MHz MIPS32 core, which together deliver deterministic TCP/IP throughput for protocols like Modbus TCP, EtherNet/IP, and PROFINET. The 512 KB SRAM is sufficient for a full TCP/IP stack plus application buffers, while the 2 MB Flash accommodates multiple protocol libraries and a web configuration UI. Placed as the main processor between an external PHY and the fieldbus, it eliminates the need for a dedicated network coprocessor. Compared with software TCP/IP on smaller MCUs, the integrated MAC plus DMA engine offloads packet handling and frees the core for application logic. The -40C to +85C industrial rating supports factory-floor deployment.
Recommandé
Multi-Protocol Communication Bridge
The PIC32MZ2048ECG144T-I/PL supports multi-protocol bridges (USB-to-Ethernet, USB-to-CAN, SPI-to-UART) thanks to its USB 2.0 High-Speed with on-chip PHY and six UART/SPI/I2C modules plus CAN. At 200 MHz the MIPS32 core can manage concurrent protocol conversions without offloading to external bridge ICs, and the multi-channel DMA engine sustains data rates needed for USB HS (480 Mbps) or 1 Mbaud CAN-FD. Typical placement: hub device between a host PC over USB and field devices over CAN/Ethernet, with the MCU running all protocol stacks concurrently. The 144-LQFP's up to 120 GPIO allows direct connection to multiple downstream buses. Trade-off: software complexity is high, so a real-time OS like FreeRTOS is recommended.
Recommandé
Connected Human-Machine Interface (HMI)
The PIC32MZ2048ECG144T-I/PL fits HMI controller boards because its 200 MHz MIPS32 core with FPU can drive TFT LCDs through the parallel PMP interface, and the 2 MB Flash stores graphical assets, fonts, and multiple language tables. The integrated Ethernet enables remote HMI monitoring, while USB HS supports firmware updates and touchscreen data streams. With 512 KB RAM the MCU can host a full LVGL or emWin graphical stack plus a Modbus/TCP server. The 144-LQFP package's high GPIO count (120) connects directly to resistive or capacitive touch controllers, RGB displays, and keypad matrices. Industrial -40C to +85C operation suits factory HMI panels without additional thermal management.
Recommandé
Building Automation Controller
The PIC32MZ2048ECG144T-I/PL is well suited for building automation controllers (BACnet, KNX, Modbus) thanks to its integrated Ethernet for IP backbone connectivity, USB for commissioning and Zigbee/Z-Wave dongles, and the hardware crypto engine for TLS-secured cloud connectivity. The 200 MHz MIPS32 core runs BACnet/IP stacks alongside scheduling logic, while the 2 MB Flash stores application code, configuration, and OTA update staging. Multiple UART/SPI/I2C interfaces connect to sensor hubs and actuator drivers in lighting, HVAC, and access control subsystems. Placed at the heart of a multi-rack automation panel, it replaces separate processor plus network modules. Industrial temperature range matches BAS cabinet environments.
Recommandé
Point-of-Sale (POS) Terminal
The PIC32MZ2048ECG144T-I/PL fits POS terminal designs because of its USB 2.0 HS host for barcode scanners and payment peripherals, integrated Ethernet for cloud payment gateways, and the hardware crypto engine for PCI-compliant transaction encryption. The 2 MB Flash holds the application, secure firmware, and cryptographic libraries, while 512 KB SRAM buffers transaction queues and TLS sessions. Multiple UARTs drive receipt printers, cash drawers, and customer displays. The integrated peripherals reduce BOM cost versus designs requiring separate USB host controllers and Ethernet bridges. Real-time deterministic response is critical at point-of-sale, which the 200 MHz MIPS32 core delivers with interrupt latencies under 100 ns.
Recommandé
Remote Telemetry / IoT Gateway
The PIC32MZ2048ECG144T-I/PL suits remote telemetry and IoT edge gateways because it integrates Ethernet, USB, CAN, and multiple serial interfaces in one chip, consolidating multiple physical-layer connections that would otherwise require multiple MCUs. The hardware crypto engine handles TLS/DTLS for cloud uploads, while the 512 KB SRAM holds MQTT buffers and time-series data. The 2 MB Flash can run an embedded Linux alternative (MPLAB Harmony) plus application firmware and OTA update images. Placed at the edge between field sensors (Modbus RTU, CAN, 4-20 mA) and the cloud, it aggregates data and filters locally. Trade-off: for cellular connectivity an external LTE module is still required, but the MCU can host the AT-command manager.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ2048ECG144T-I/PL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ2048ECG144-I/PL | PIC32MZ1024ECG144-I/PH | PIC32MZ1024ECH144T-I/PL | PIC32MZ1024EFG144-I/PL | PIC32MZ1024EFE144-I/PL | PIC32MZ1024ECM144-I/PH |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LQFP (PL, 0.4 mm pitch) | 144-LQFP (PL, 0.4 mm pitch) - identical | 144-LQFP (PH, 0.5 mm pitch) | 144-LQFP (PL, 0.4 mm pitch) - identical | 144-LQFP (PL, 0.4 mm pitch) - identical | 144-LQFP (PL, 0.4 mm pitch) - identical | 144-LQFP (PH, 0.5 mm pitch) |
| Core Architecture | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) | MIPS32 microAptiv (M-Class) |
| Maximum CPU Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 250 MHz | 250 MHz | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) | 2 MB (2M x 8) | 1 MB (-50%) | 1 MB (-50%) | 1 MB (-50%) | 1 MB (-50%) | 1 MB (-50%) |
| SRAM | 512 KB | 512 KB | 256 KB (-50%) | 256 KB (-50%) | 256 KB (-50%) | 256 KB (-50%) | 256 KB (-50%) |
| Integrated Ethernet PHY | No (MAC only, external PHY required) | No (MAC only) | No (MAC only) | No (MAC only) | No (MAC only) | No (MAC only) | No (MAC only) |
| USB 2.0 HS with on-chip PHY | Yes (EC family feature) | Yes | Yes | Yes | No (EF family lacks USB HS PHY) | No (EF family) | Yes |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Highest Flash density in PIC32MZ EC 144-LQFP family (vs PIC32MZ1024ECH144T-I/PL)
- Tape-and-reel packaging for high-volume SMT (vs PIC32MZ2048ECG144-I/PL)
- Integrated USB 2.0 High-Speed PHY (vs PIC32MZ1024EFG144-I/PL)
Notes de conception
Estimated: at 200 MHz CPU and 3.3 V VDD with all peripherals active, the PIC32MZ2048ECG144T-I/PL core current draw is approximately 70 mA plus I/O switching. Place a 10 uF bulk capacitor and 0.1 uF ceramic bypass within 5 mm of every VDD/VSS pin pair. Add a ferrite bead on the analog AVDD supply rail feeding the ADC to achieve the 12-bit SNR datasheet rating.
Route the USB DP/DN pair as 90-ohm differential with length matching within 150 mils, and route the Ethernet MII/RMII signals on the same layer with reference to a continuous ground plane. Per the PIC32MZ EC datasheet, the REF_CLK output for RMII requires a 50 MHz reference; place this trace away from switching signals. Maintain 4-layer PCB with solid ground plane for EMI control.
Do not skip the MCLR reset capacitor; a 10 kohm pull-up plus 0.1 uF capacitor is required for proper power-on reset behavior. The VDDIO and VDD rails must rise within 20 ms; use a controlled ramp regulator. Never operate the Ethernet MAC without configuring the MII/RMII timing registers correctly for the chosen PHY or RMII collisions will corrupt frames.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip environmental declarations. Not AEC-Q100 qualified - this is an industrial-grade MCU; for automotive use consider PIC32MZ EC AEC-Q100 qualified variants. Conflict minerals compliant per Microchip's Conflict Minerals Report.
