Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC32MZ2025DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2025DAL176-I/2J

PIC32MZ2025DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAL176-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller operating at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM within a 176-pin LQFP (20x20 mm) package. Designed for the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, it provides MPU-like performance combined with MCU-class design simplicity, making it a strong fit for graphical user interface (GUI) designs and human-machine interface (HMI) applications. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, memory (Flash and SRAM), peripherals, and I/O on one silicon die, targeting embedded control applications where deterministic real-time behavior, low power, and rich peripheral sets are critical. Within the broader taxonomy, the PIC32MZ2025 belongs to: MCU -> 32-bit MCU -> MIPS32 microAptiv core MCU -> graphics-enabled PIC32MZ DA family -> semiconductor (Integrated Circuit). This hierarchy helps engineers locate the right device for GUI/HMI work without entering the MPU (microprocessor) design complexity that requires external DDR and bootloader orchestration. Key differentiating features include an integrated Graphics Controller and Graphics Processor for hardware-accelerated GUI rendering, on-chip support for external DDR2 DRAM up to 128 MB addressable, and a 12-bit 18 MSPS ADC module providing up to 45 analog inputs. Communication peripherals include HS USB and CAN, while a wide operating voltage range of 2.3V to 3.6V supports both 3.3V-system designs and battery-powered industrial use cases. Architecturally, the device employs the MIPS32 microAptiv core with instruction and data caches, enabling efficient code execution at 200 MHz (3.33 CoreMark/MHz equivalent throughput class). The on-chip DDR2 controller eliminates the need for an external memory controller, while the integrated GPU-style pipeline reduces CPU overhead for layered displays and complex widgets. Typical applications include industrial HMI panels, automotive infotainment displays, smart appliance touch interfaces, medical device screens, point-of-sale terminals, and graphical IoT gateways. The combination of large memory, on-chip graphics, and 45 analog inputs also makes it suitable for mixed-signal data acquisition with visualization. When designing with this part, ensure PCB layout preserves LQFP-176 signal integrity, allocate adequate decoupling near the external DDR2 routing, and verify the Graphics Controller pin mapping against your chosen LCD interface. The industrial temperature grade (-40C to +85C) makes it directly deployable in factory automation environments without derating. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, full LQFP-176 pinout, drop-in alternatives within the same PIC32MZ DA family, and practical design notes not duplicated in the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAL176T-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP | Microchip
PIC32MZ2025DAL176T-I/2J

PIC32MZ2025DAL176T-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAL176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL graphics microcontroller delivering 200 MHz CPU performance with 2 MB on-chip Flash and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package. It integrates a graphics controller, graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and HS USB for embedded graphical user-interface designs. A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance processor core, program memory, data memory, and peripherals on a single silicon die. The PIC32MZ DAL family specifically targets graphics HMI applications by combining an MCU-class programming model with MPU-class peripherals: a 2D Graphics Processing Unit (GPU) and a Display Controller that offload pixel rendering from the CPU, plus an external DDR2 DRAM interface (32 MB or 128 MB addressable) that serves as a framebuffer. Within the broader taxonomy, this device belongs to: microcontroller -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ family -> graphics-capable sub-family -> PIC32MZ2025 DAL series. Key features include 2 MB Flash program memory, 640 KB SRAM, 200 MHz core clock with 252 DMIPS, hardware crypto engines, 10/100 Ethernet MAC, CAN 2.0, HS USB 2.0 with on-chip PHY, 12-bit 18 MSPS ADC with up to 45 analog inputs, and a 16-bit parallel master port for external DDR2. The 176-LQFP package provides 120 GPIO plus dedicated peripheral pins, suitable for industrial-temperature applications from -40C to +85C (I-temp grade). The PIC32MZ2025DAL176 uses a 5-stage MIPS32 microAptiv pipeline with dual-issue capability and tightly-coupled prefetch buffers, achieving 1.26 DMIPS/MHz. The integrated GPU accelerates fills, blits, alpha blending, and color-space conversion, freeing the CPU to handle communication stacks (Ethernet, USB, CAN). Dedicated DDR2 controller with on-board termination simplifies display framebuffer expansion without external memory controller glue. Typical applications include industrial HMI touch panels, automotive infotainment head units, medical patient monitors with graphical displays, point-of-sale terminals, building automation control panels, and embedded instrumentation with rich graphics. The combination of MCU simplicity and MPU-class graphics makes it a strong choice when designers want a single-chip BOM instead of a host MCU plus a separate GPU or display controller. When designing with this device, allocate sufficient PCB area for the external DDR2 routing (matched length, controlled impedance) and follow Microchip's DDR2 layout guidelines in the family reference manual. Ensure 5V-tolerant I/O lines are not exposed to voltages above the absolute maximum, and use the integrated thermal management and brown-out reset for robust industrial deployments. This page synthesizes distributor pricing, drop-in alternatives from the same Microchip PIC32MZ DAL family, and practical design notes that complement the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAL176T-V/2J - 200MHz 32-bit MCU with Graphics | Microchip
PIC32MZ2025DAL176T-V/2J

PIC32MZ2025DAL176T-V/2J - 200MHz 32-bit MCU with Graphics | Microchip

The Microchip Technology PIC32MZ2025DAL176T-V/2J is a 200 MHz 32-bit MIPS32 microAptiv microcontroller in the PIC32MZ DA family, integrating 2 MB Flash and 640 KB SRAM into a 176-pin LQFP (20x20 mm) package. It targets high-end graphical embedded designs, offering MPU-like performance with MCU-class integration including an on-chip Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN. The "T" suffix denotes Tape & Reel packaging, the "V" suffix denotes the -40C to +125C extended V-temp grade, and "2J" is the Microchip tray/reel identifier. A 32-bit microcontroller (MCU) is an integrated circuit combining a processor core, program memory, data memory, and a rich set of peripherals on a single die. PIC32MZ DA parts sit at the top of the PIC32 family and are positioned as microcontrollers with MPU-like performance for graphical user interface designs, bridging the gap between traditional MCU simplicity and application processor capability. Key features include MIPS32 microAptiv core, 200 MHz core clock, 2 MB Flash, 640 KB SRAM, 12-bit 18 MSPS ADC, integrated Graphics Controller and Graphics Processor, HS USB 2.0, CAN 2.0, up to 45 analog channels, DDR2 DRAM controller for external memory expansion (32 MB or 128 MB), and a wide peripheral set including I2C, SPI, UART, SQI, and EBI. The 176-LQFP provides generous I/O for parallel display and memory interfaces. The device uses a 5-stage pipelined MIPS32 microAptiv core with DSP extensions, single-cycle hardware multiply/divide, and tightly coupled peripherals for deterministic real-time performance. The integrated Graphics Controller accelerates primitives (lines, rectangles, blits, alpha blending) while the Graphics Processor handles higher-level rendering tasks, offloading the CPU for smoother GUI rendering. Typical applications include industrial HMI panels, automotive infotainment and instrument clusters, medical patient-interface devices, point-of-sale terminals, avionics displays, smart appliances with touch GUI, and any embedded system requiring rich graphical rendering without an external MPU. When designing with this MCU, allocate PCB area for the DDR2 DRAM interface and provide sufficient decoupling on the analog AVdd rail serving the 12-bit ADC. The Graphics Controller expects an external parallel display via EBI, so plan the pin map to balance display data, touch, and other peripherals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet to accelerate your design selection.

Devis Contact
PIC32MZ2025DAR169-I/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAR169-I/6J

PIC32MZ2025DAR169-I/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller integrating 2MB Flash, 640KB SRAM, a 200 MHz core, integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, and on-chip stacked DDR2 DRAM (up to 32 MB internal / 128 MB external addressable), housed in a 169-ball LFBGA package (11x11 mm). It is targeted at MPU-class graphical embedded applications while keeping MCU ease of design. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) into a single chip. MCUs form the lowest tier of embedded compute hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor IC, and they sit beneath microprocessors (MPUs) in raw performance but above discrete logic in integration. The PIC32MZ DA family specifically bridges MCU and MPU tiers by adding an LCD controller, 2D graphics processor and large stacked DDR2 memory on-chip. Key features of the PIC32MZ2025DAR169 include 32-bit MIPS32 microAptiv core running up to 200 MHz, 2MB Flash program memory (2M x 8), 640KB SRAM, integrated DDR2 memory controller, hardware 2D Graphics Processor and Display Controller, 12-bit 18 MSPS ADC with up to 45 analog input channels, CAN, HS USB, and an industrial operating temperature grade (-40C to +85C). The architecture pairs a deterministic MIPS32 Harvard core with a dedicated graphics pipeline and 32-bit DDR2 external memory interface, eliminating the need for an external MPU and reducing BOM cost in graphical HMI designs. The 18 MSPS ADC supports simultaneous touch and analog sensing, enabling resistive-touch GUIs without an external touch ASIC. Typical applications include industrial HMI panels, graphical touch displays, home automation controllers, medical device interfaces, automotive infotainment entry-level displays, and POS terminals that require on-board graphics rendering at MPU-like performance. When designing with this part, allocate PCB area for the 169-ball LFBGA (11x11 mm) and follow Microchip's DDR2 routing guidelines - the stacked-DDR2 footprint requires controlled-impedance matched-length traces. Use MPLAB Harmony 3 for peripheral and graphics driver support. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design guidance drawn from Microchip application notes and reference designs - insights not consolidated on the manufacturer product page alone.

Devis Contact
PIC32MZ2025DAR169-V/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAR169-V/6J

PIC32MZ2025DAR169-V/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169-V/6J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DAR family with 2MB Flash, 200 MHz CPU clock, integrated Graphics Controller and Graphics Processor, on-chip stacked DDR2 DRAM (32 MB or 128 MB externally addressable), 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN, in a 169-ball LFBGA (11x11 mm) package. It targets V-temp grade with -40C to +105C operation. The device is built around the MIPS32 microAptiv core and is part of Microchip's 32-bit MCU family optimized for graphical user interface applications. A PIC32MZ microcontroller is a 32-bit MCU based on the MIPS32 microAptiv core architecture, positioned above the Microcontrollers controller hierarchy as a low-endurance system-on-chip. The DAR sub-series specifically integrates a graphics LCD controller, hardware graphics processor (GPU), and a stacked DDR2 memory interface, allowing designers to drive a TFT display with MPU-class performance while retaining MCU-class ease of programming through MPLAB X IDE and MPLAB Harmony. Compared to legacy PIC32MX parts, PIC32MZ DAR provides significantly more RAM, on-chip DDR2, an integrated GPU, and a faster ADC, trading off power consumption for computational and graphical throughput. Key features include 2MB program Flash, 640 KB SRAM (per Microchip product page), HS USB 2.0 device/host/OTG, CAN 2.0B, integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, six UART, SPI, I2C peripherals, dedicated graphics peripherals, and a 200 MHz core capable of 415 DMIPS. The 169-LFBGA package exposes 120 GPIO pins (per pcbelectronics listing) and offers a compact 11x11 mm footprint suitable for space-constrained HMI boards. The architecture pairs the 32-bit MIPS core to a dedicated graphics pipeline and DDR2 memory controller, eliminating the need for an external SDRAM chip for frame storage. The 12-bit 18 MSPS ADC supports high-speed sensor acquisition, while HS USB and CAN simplify connectivity for industrial gateways. Code development is supported through MPLAB X IDE, MPLAB Harmony, and XC32 compiler, with extensive middleware for graphics, USB, and TCP/IP stacks. Typical applications include graphical human-machine interface (HMI) panels, industrial control terminals with TFT LCD, automotive infotainment clusters, point-of-sale terminals, and IoT gateways with display. The integrated GPU and DDR2 interface allow developers to run emWin, LVGL, or Microchip MPLAB Harmony Graphics without external frame buffers. When designing with this device, allocate 8 or 10-layer PCB stack-up for the DDR2 interface to maintain signal integrity; the LFBGA-169 package requires microvia and via-in-pad capable fabrication. Ensure a stable 1.8V core supply and provide decoupling per the manufacturer reference schematic. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten evaluation and sourcing.

Devis Contact
PIC32MZ2025DAR169T-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2025DAR169T-I/6J

PIC32MZ2025DAR169T-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAR169T-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 200 MHz with 2 MB of Flash program memory, housed in a 169-ball LFBGA (11x11 mm) package. It integrates a dedicated Graphics Controller and Graphics Processor, 640 KB of on-chip SRAM, and an interface for external stacked DDR2 DRAM (32 MB or 128 MB), targeting graphical user interface (GUI) and human-machine interface (HMI) applications. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. PIC32MZ DAR devices belong to the MIPS32 microAptiv MCU family, which sits in the broader category of 32-bit microcontrollers, embedded processors, and finally semiconductors. The "DAR" suffix specifically denotes the Graphics integrated family with stacked DDR2 DRAM support, distinguishing it from the DAA (lower pin count) and DAB (audio) sub-families. Key features include a 12-bit ADC module capable of 18 MSPS with up to 45 analog inputs, a 32-bit data bus, 120 I/O pins, integrated CAN and High-Speed USB, and an operating voltage of 1.8 V. The LFBGA-169 package provides 0.80 mm terminal pitch and a seated height of 1.56 mm, making it suitable for compact, high-density PCB designs typical of graphical embedded products. The PIC32MZ2025DAR169T-I/6J uses a single-core MIPS32 microAptiv architecture manufactured on CMOS process technology. The T-suffix indicates tape and reel packaging for high-volume assembly lines, while the I-temp suffix specifies an industrial temperature range of -40C to +85C for harsh-environment deployments. Typical applications include industrial HMI panels, automotive infotainment displays, medical patient monitors, smart-home control hubs, and graphical IoT gateways. The integrated DDR2 controller and graphics peripherals dramatically reduce BOM cost and PCB complexity compared to MCU-plus-external-GPU designs. When designing with this MCU, use a 4-layer PCB with dedicated ground and power planes for the DDR2 signals. Validate DDR2 trace length matching to the JEDEC DDR2 specification; failure to match impedances causes intermittent display corruption that is difficult to debug. The 169-ball BGA requires X-ray inspection or BGA rework capability at the assembly stage.

Devis Contact
PIC32MZ2025DAR169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAR169T-V/6J

PIC32MZ2025DAR169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169T-V/6J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-ball LFBGA 11x11 mm package. The "T" suffix indicates Tape & Reel packaging and "-V" denotes the V-temp (-40C to +105C) operating grade, while the 169-ball LFBGA land pattern supports compact, high-density graphical embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The PIC32MZ DA family belongs to the MIPS32 microAptiv Harvard architecture family within Microchip's broader 32-bit microcontroller portfolio, bridging MCU simplicity with MPU-class performance for graphical human-machine interface (HMI) applications. Key features of this part include 32 MB or 128 MB of externally addressable DDR2 DRAM interface, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN, HS USB, and multiple UART/SPI/I2C interfaces. The combination of L1 cache, large SRAM, and DDR2 controller delivers MPU-like throughput while retaining deterministic MCU interrupt behavior. Typical applications include industrial HMI panels, automotive instrument clusters, graphical touch-screen controllers, IoT gateways with rich UIs, medical patient monitors, and multi-rail power-aware appliances where 2 MB of Flash supports vector graphics assets and DDR2 RAM buffers large framebuffers. When designing with this MCU, follow the Microchip DDR2 layout guide for the LFBGA escape and allocate adequate decoupling. Provide separate analog and digital supplies and respect the V-temp thermal limits during board-level qualification.

Devis Contact
PIC32MZ2025DAR176-V/2J - 200MHz MCU, 2MB Flash, 176-LQFP | Microchip
PIC32MZ2025DAR176-V/2J

PIC32MZ2025DAR176-V/2J - 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, designed for MPU-class performance with MCU simplicity in graphical HMI applications. The device integrates 2 MB of Flash, 640 KB of SRAM, and supports up to 32 MB (or 128 MB externally addressable) of stacked DDR2 DRAM, with a 200 MHz CPU core, integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN and Hi-Speed USB peripherals, all housed in a 176-pin LQFP package (20x20 mm). A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and programmable peripherals onto one silicon die. The PIC32MZ family positions these devices between classical 8/16-bit MCUs and application processors, delivering MHz-class throughput, large memory, and rich peripherals while remaining programmable in C with a deterministic interrupt model. The DAR suffix indicates a 2 MB Flash, 176-pin Graphics variant, and the -V suffix denotes the V-temp (-40C to +105C) operating range suitable for industrial and harsh-environment GUI designs. Key differentiating features of this part include on-chip stacked DDR2 DRAM (eliminating an external SDRAM), a dedicated 2D Graphics Processing Unit and parallel display controller driving TFT panels without an external graphics chip, and an HS USB 2.0 PHY plus 2 CAN 2.0b controllers for industrial networking. The 176-LQFP footprint gives generous I/O for parallel RGB displays, touch controllers, and external sensors. Architecturally, the PIC32MZ DA family uses a MIPS32 microAptiv core with a 16 KB I-cache and 4 KB D-cache, prefetch buffers, and tightly-coupled peripherals including a 12-bit 18 MSPS successive-approximation ADC, SQI (Serial Quad Interface) for XIP flash, and an EBI for additional memory expansion. Hardware crypto, audio DAC interfaces, and a 10/100 Ethernet MAC with integrated PHY round out the connectivity set for embedded GUI nodes. Typical applications include industrial HMI panels, home-automation touch controllers, medical instrument displays, point-of-sale terminals, automotive cluster prototypes, and low-cost MPU replacements in graphical embedded products. Engineers typically pair this MCU with a TFT LCD (RGB888), an external touch controller over I2C, and a NOR flash for asset storage via SQI. Designers should allocate adequate PCB area for the 176-LQFP (20x20 mm) footprint, route DDR2 signals with matched lengths and 50 ohm controlled impedance, and provide bulk decoupling on every supply pin. The on-chip stacked DDR2 relaxes board complexity versus an external SDRAM design but still demands strict reference-voltage and VTT termination design. This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC32MZ DA family, and practical design notes that go beyond what is in the manufacturer datasheet, including a same-package comparison with the DAB/DAA/DAR family members and routing guidance for the 176-LQFP DDR2 variant.

Devis Contact
PIC32MZ2025DAR176T-I/2J - 200MHz 2MB Flash 32-bit MCU | Microchip
PIC32MZ2025DAR176T-I/2J

PIC32MZ2025DAR176T-I/2J - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2025DAR176T-I/2J is a high-performance MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz, with 2 MB of Flash and 176-LQFP (20x20 mm) packaging, plus an exposed thermal pad. It is targeted at GUI-rich embedded applications thanks to an integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, and High-Speed USB plus CAN connectivity. The /2J industrial temperature grade supports -40C to +85C operation. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, memory, and peripherals. The PIC32MZ DAR family sits at the high end of the PIC32 portfolio, blending MPU-class performance with MCU simplicity. Within the taxonomy, the device belongs to: microcontroller -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ family -> PIC32MZ DAR sub-family. The DAR variant is purpose-built for human-machine-interface designs, distinguished from EF and EC sub-families by its graphics pipeline and DDR2 memory controller. Key features include 2 MB of Flash (2M x 8), up to 640 KB of SRAM, on-chip support for external 32 MB or 128 MB DDR2 DRAM, and an integrated LCD controller. The 12-bit ADC achieves 18 MSPS, and the device offers up to 45 analog input channels. A hardware crypto engine, parallel master port, and 200 MHz core give the MCU enough throughput for advanced HMIs and connected IoT edge nodes. Architecturally, the PIC32MZ DAR combines a MIPS32 microAptiv core with a dedicated graphics processor and DDR2 DRAM controller - a rare pairing in an MCU footprint. This dual-engine design lets a single chip drive WVGA-resolution displays while still handling application logic, eliminating the need for a separate graphics companion IC. The on-die Flash and SRAM provide deterministic code execution with zero external memory wait states for code stored in Flash. Typical applications include industrial HMI panels, automotive infotainment, medical patient monitors, smart home control displays, and ruggedized portable terminals. The DDR2 controller allows large framebuffers without external SDRAM controllers, while the 12-bit 18 MSPS ADC supports simultaneous touchscreen and analog sensor monitoring. When designing with this device, allocate PCB area for DDR2 routing with controlled-impedance traces and matched length matching, since the DDR2 interface is critical for graphics performance. The 176-LQFP exposed pad requires thermal vias for reliable operation above 100 mA core current. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAS169-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2025DAS169-I/6J

PIC32MZ2025DAS169-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAS169-I/6J is a 32-bit MIPS microAptiv PIC32MZ DAS microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, packaged in a 169-ball LFBGA (11x11 mm) and offering 32 MB or 128 MB of externally addressable DDR2 DRAM. It integrates a graphics controller, graphics processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN, HS USB, and 120 GPIO. A 32-bit microcontroller (MCU) is a single-chip computer that combines a high-performance processor core, program and data memory, and a rich set of peripherals. The PIC32MZ family sits inside the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and uses the MIPS32 instruction set, which is widely supported by GCC, IAR, and MPLAB XC32 toolchains. Key features include hardware graphics rendering for GUI applications, a 12-bit 18 MSPS ADC capable of 45 analog input channels, on-chip DDR2 controller eliminating external memory chips, high-speed USB 2.0 with embedded PHY, and CAN 2.0b for industrial networking. The 200 MHz core delivers 330 DMIPS and 3.28 CoreMark/MHz, while the wide 32-bit datapath accelerates pixel and audio buffer handling. The PIC32MZ2025DAS169-I/6J architecture pairs an MIPS32 microAptiv core with a multi-layer bus matrix that allows the graphics engine, USB, and ADC to access SRAM and DDR2 without stalling the CPU. The stacked-DDR2 variant lowers BOM cost and PCB area versus an SDRAM + controller implementation, while keeping deterministic interrupt latency needed for industrial HMI. Typical applications include industrial HMI designs, automotive dashboard graphics, IoT gateways with LCD, medical patient monitors, and audio/visual embedded consoles. The combination of on-chip DDR2 plus integrated GPU removes the need for a discrete display controller in mid-resolution TFT panels. When designing with this device, plan the PCB for 169-ball BGA escape and follow Microchip's DDR2 layout guide for the stacked-DRAM pins. Decoupling, trace-length matching for DDR2, and thermal copper pours under the BGA are critical; otherwise signal integrity at 200 MHz will degrade. This page synthesizes Microchip datasheet specifications, current distributor pricing, and drop-in alternatives not collated on the manufacturer's product page.

Devis Contact
PIC32MZ2025DAS169-V/6J - 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAS169-V/6J

PIC32MZ2025DAS169-V/6J - 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAS169-V/6J is a high-performance MIPS32 microAptiv 32-bit microcontroller from the PIC32MZ DA family, featuring 2MB of Flash, 256KB SRAM, integrated DDR2 controller, and a 200 MHz core. It is housed in a 169-ball LFBGA (11x11 mm) surface mount package. A PIC32 MCU is a 32-bit microcontroller built on the MIPS architecture, designed to deliver MPU-class performance while retaining the deterministic interrupt response and ease-of-use of an MCU. It belongs to the broader hierarchy: 32-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. The PIC32MZ DA family specifically targets graphical user interface (GUI) applications with integrated graphics peripherals and stacked DDR2 memory support. Key features of this part include: 2MB (2M x 8) internal Flash, 256KB SRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and on-chip support for up to 128MB externally addressable DDR2 DRAM. The 169-ball LFBGA package provides 120 I/O lines with an operating voltage of 1.8V, and V-temp range of -40C to +105C. The device leverages a superscalar MIPS32 microAptiv core with DSP extensions, achieving 200 MHz / 252 DMIPS operation. The integrated DDR2 memory controller eliminates the need for an external SDRAM companion chip, simplifying board layout and improving EMI margins. The Graphics Processor handles TFT LCD panels directly, offloading the CPU. Typical applications include industrial HMI panels, graphical touch-screen controllers, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and any embedded design requiring a color TFT GUI with rich connectivity. The combination of high-performance core, integrated DDR2, and dedicated graphics makes this an MPU-class part in an MCU form factor. When designing with this part, ensure the PCB has a continuous ground plane under the LFBGA to manage thermal dissipation. DDR2 routing requires matched-length fly-by-layer topology; consult the family reference manual for trace length matching. Plan board layout before pin assignment. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found in the standard datasheet catalog entries.

Devis Contact
PIC32MZ2025DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAS169T-I/6J

PIC32MZ2025DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAS169T-I/6J is a 32-bit MIPS32 microAptiv-based PIC32MZ DAS microcontroller integrating 2MB of Flash, 256KB of SRAM, an integrated Graphics Controller and Graphics Processor, and an externally addressable DDR2 DRAM interface (32MB or 128MB), supplied in a 169-ball LFBGA (11x11 mm) package with 120 user I/O lines. It runs at up to 200MHz, supports a 12-bit 18 MSPS ADC with up to 45 analog inputs, and exposes CAN and HS USB connectivity. Operating voltage is 1.8V over an industrial -40C to +85C temperature range. Background Knowledge - What is a 32-bit MCU with integrated graphics? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory and peripherals. A 32-bit MCU such as the PIC32MZ executes instructions on a 32-bit datapath, allowing MPU-like performance at MCU complexity. The PIC32MZ DA family further integrates a Graphics Processing Unit (GPU) and DDR2 memory controller, eliminating the need for an external MPU + LCD controller in graphical Human-Machine Interface (HMI) designs. The product hierarchy is: PIC32MZ DA -> PIC32 family -> 32-bit MCU -> microcontroller -> semiconductor. Key Features - The PIC32MZ2025DAS169T-I/6J combines 200 MHz core throughput with 2MB Flash and 256KB SRAM, supplying ample headroom for full GUI stacks and connectivity protocols simultaneously. The 12-bit 18 MSPS ADC with up to 45 analog inputs enables high-speed sensor aggregation. High-speed USB, CAN, and 120 GPIO deliver multi-bus industrial connectivity in a single chip. Technical Depth - The microAptiv core uses a 5-stage pipeline with DSP extensions; the integrated DDR2 controller supports up to 128MB external DRAM, effectively giving the MCU an MPU-class memory footprint for frame buffers. The 169-LFBGA package has a 0.80mm ball pitch (JESD-30 S-PBGA-B169). Typical Applications - Industrial HMI panels, automotive dashboards, home appliance touch controllers, medical GUI displays, and connected point-of-sale terminals. Design Consideration - Use the DDR2 controller carefully: PCB layout of 169-LFBGA requires 4-layer minimum stack-up and matched-length traces to preserve signal integrity. Always refer to the PIC32MZ DA family datasheet for DDR2 routing guidelines. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAS169T-V/6J - 32-bit MCU 200MHz 2MB Flash 169-LFBGA | Microchip
PIC32MZ2025DAS169T-V/6J

PIC32MZ2025DAS169T-V/6J - 32-bit MCU 200MHz 2MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAS169T-V/6J is a high-performance 32-bit microcontroller from the PIC32MZ DA family, featuring a MIPS32 microAptiv core running at 200 MHz, 2 MB of Flash program memory, 640 KB of SRAM, and integrated 32 MB DDR2 DRAM in a 169-ball LFBGA package (11x11 mm). The device integrates a hardware Graphics Controller and Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, plus HS USB and CAN interfaces. Tape and reel (-T) and V-temperature grade (-V) suffixes indicate automotive operating range. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, peripherals, and I/O. PIC32MZ DA parts sit at the high end of the MCU hierarchy, delivering MPU-like performance with MCU simplicity for graphics-intensive human-machine interface (HMI) designs. Within the broader taxonomy, this part belongs to MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU -> embedded processor. Key features include 200 MHz core with hardware graphics acceleration, integrated 32 MB DDR2 DRAM eliminating external memory in many designs, 2 MB Flash with 640 KB SRAM, 12-bit ADC at 18 MSPS for high-speed analog capture, and automotive-grade temperature range. The LFBGA-169 package balances high I/O count with a compact 11x11 mm footprint, suitable for space-constrained GUI applications. The DAS variant adds an on-chip 32 MB DDR2 controller and graphics peripherals over the base DA family. This enables smooth rendering of TFT LCD panels without external memory, reducing BOM cost and PCB complexity in industrial, automotive cluster, and medical display applications. Typical applications include automotive instrument clusters, industrial HMI panels, medical patient monitors, point-of-sale terminals, and IoT edge gateways with local graphics rendering. The combination of high-speed ADC and graphics controller makes it well-suited for systems that combine sensor acquisition with display output. When designing with this part, account for LFBGA routing complexity and provide adequate via-in-pad escape for the BGA. The integrated DDR2 controller still requires careful PCB stackup and impedance matching for signal integrity. Junction temperature must remain within automotive-grade limits when used in vehicle environments. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the standalone datasheet, helping engineers evaluate this MCU for next-generation graphics-enabled embedded designs.

Devis Contact
PIC32MZ2025DAS176-V/2J - 32-bit MCU 200MHz 2MB Flash | Microchip
PIC32MZ2025DAS176-V/2J

PIC32MZ2025DAS176-V/2J - 32-bit MCU 200MHz 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAS176-V/2J is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, integrating 2 MB of Flash, 640 KB of SRAM, and an on-chip DDR2 DRAM controller supporting up to 128 MB of external addressable memory, all housed in a 176-pin LQFP package (20x20 mm). It runs at up to 200 MHz, delivers MPU-class throughput while preserving MCU ease-of-design, and integrates a dedicated Graphics Controller plus Graphics Processor for HMI and GUI workloads. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC32 family belongs to the MIPS32 microAptiv architecture family and is positioned at the high end of Microchip's 32-bit MCU portfolio, aimed at applications where traditional microcontrollers run out of performance and engineers want to avoid migrating to a full microprocessor with external memory and PMIC. Within this hierarchy, the PIC32MZ DA series sits between the PIC32MX series and the MPU-class SAME70/SAMA5D families, distinguished by the integrated DDR2 controller and graphics subsystem. Key features include 2 MB of Flash with live update support, 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, Hi-Speed USB, and an integrated 32-bit DDR2 memory interface that simplifies board layout by stacking DRAM directly on-package in BGA-176 variants. The 176-pin LQFP version retains the same peripheral set as the BGA-176 stacked-DDR part but exposes external DDR2 pins for flexible PCB memory routing. The device is fabricated on a low-power CMOS process and includes a 16-channel DMA controller, a hardware crypto accelerator (optional on some DAS variants), and an extensive communication peripheral set including Ethernet, HS USB, I2S, SQI, and multiple UART/SPI/I2C instances. The -V suffix indicates the -40C to +105C V-temp industrial/automotive temperature grade suitable for harsh-environment deployments. Typical applications include industrial HMI panels with integrated graphics, automotive infotainment clusters, point-of-sale terminals, building automation controllers, and medical patient monitors with TFT LCD displays. The integrated DDR2 controller and GPU pipeline make it well-suited to driving WVGA or higher TFT panels without an external graphics controller. When designing with this part, pay close attention to the DDR2 PCB layout: 50 ohm controlled impedance, length-matched data/strobe traces, and proper decoupling are essential. The 176-pin LQFP at 0.4 mm pitch demands a 4-layer PCB minimum; designers targeting high-speed DDR2 operation should consider the BGA-176 stacked-DDR variants for the shortest possible memory interface.

Devis Contact
PIC32MZ2025DAS176T-I/2J - 200MHz MCU 2MB Flash Graphics | Microchip
PIC32MZ2025DAS176T-I/2J

PIC32MZ2025DAS176T-I/2J - 200MHz MCU 2MB Flash Graphics | Microchip

The Microchip PIC32MZ2025DAS176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAS-series microcontroller running at 200 MHz, integrating 2 MB (2M x 8) Flash, 256 KB SRAM plus 32 MB stacked DDR2 SDRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, and HS USB plus CAN, packaged in a 176-pin LQFP (20 x 20 mm) with exposed pad. What is a PIC32MZ DA microcontroller? The PIC32MZ DA family sits within Microchip's 32-bit MCU portfolio as a high-integration, graphics-capable part aimed at applications that traditionally required an MPU plus external peripherals. It combines the deterministic interrupt behaviour of an MCU with MPU-class peripherals - large stacked DRAM, LCD controller and 2D graphics engine - in a single die. Within the broader taxonomy: PIC32MZ DA belongs to PIC32MZ -> PIC32 -> 32-bit MCU -> microcontroller -> embedded semiconductor. Key features of the target part include a MIPS32 microAptiv core with hardware multiply/divide and DSP extensions, an L1 cache subsystem, dual Flash panels for live update, a 32 MB on-chip DDR2 interface, up to 120 general-purpose I/O, six UART, six SPI/I2S, six I2C, an HS USB 2.0 OTG controller, two CAN modules, a 12-bit 18 MSPS ADC with up to 45 inputs, six general-purpose timers/output compare, a parallel master port, and an SQI interface. Operating voltage is 1.8 V (core) with 3.3 V-tolerant I/O. Architecturally the device uses a 5-stage pipeline microAptiv core, dual-bank Flash for run-time reprogramming, a tightly-coupled DDR2 controller feeding a graphics engine that drives TFT panels, and a peripheral bus that supports DMA-driven transfers to the ADC, USB, CAN and SQI blocks. Compared with the larger PIC32MZ2025DAH176 (128 MB DRAM) the DAS variant integrates 32 MB DRAM, lowering BOM cost for screens up to approximately 5 inch WVGA. Typical applications include HMI/GUI panels on industrial equipment, point-of-sale terminals, medical patient monitors, automotive instrument clusters and cluster displays, IoT edge gateways with local graphics, and home appliances with colour touch displays. The exposed thermal pad aids heat spreading for sustained 200 MHz operation. Design considerations include providing a low-impedance 1.8 V core supply, sequencing of the DDR2 power rails, programming the EBI configuration for the target panel timing, and reserving sufficient PCB area for the 20 x 20 mm LQFP land pattern plus its thermal pad. This page synthesises distributor pricing, drop-in variants from the same PIC32MZ DA family, and practical design notes not found in the standalone datasheet.

Devis Contact
PIC32MZ2048ECG064-I/MR - 200MHz MCU 2MB Flash | Microchip
PIC32MZ2048ECG064-I/MR

PIC32MZ2048ECG064-I/MR - 200MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECG064-I/MR is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv M-Class core, delivering up to 200 MHz core clock with 2 MB of Flash and 512 KB of SRAM in a 64-pin 9x9 mm VQFN package. The device integrates high-speed USB 2.0, 10/100 Ethernet MAC, a Serial Quad Interface (SQI) for external flash, and a Real-Time Clock and Calendar (RTCC), targeting connected-embedded applications. The integrated peripherals include Audio I/O interfaces and a graphics-friendly parallel master port, which together make the EC family suitable for HMI and audio playback designs. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash for code, SRAM for data), and on-chip peripherals. The 32-bit class executes instructions on data 32 bits wide, offering higher throughput and larger addressable memory than 8- or 16-bit parts. The microAptiv M-class adds DSP extensions, four 64-bit accumulators, single-cycle MAC, and microMIPS mode (up to 35% smaller code). In a system hierarchy, an MCU sits between power management and application-specific ICs, controlling sensors, user interfaces, and communication links. Key specifications include 2.2V to 3.6V single-supply operation, 2 MB Flash (with an additional 160 KB boot Flash region), 512 KB SRAM, multiple UART/SPI/I2C peripherals, a 12-bit ADC at up to 1.2 Msps, and four I2S/DAC audio interfaces. The FPU accelerates floating-point math, while the ECC on Flash and SRAM supports safety-critical firmware. The SQI interface allows high-throughput access to external QSPI memories for additional storage or graphics frame buffers. The architecture combines a five-stage pipeline with hardware multiply/divide and a tightly-coupled interrupt controller, achieving 2.69 DMIPS/MHz and low-latency deterministic response. The RTCC with calendar mode and VBAT domain enables timekeeping with the main core powered down, extending battery life in always-on designs. Dedicated crypto engines (RNG, AES, SHA) and a true random number generator simplify secure-boot and TLS implementations. Typical applications include industrial IoT edge nodes with Ethernet, audio playback systems (1-4 channels), USB device/host peripherals, human-machine interfaces with TFT displays, and connected motor drives. The combination of on-chip Ethernet and USB removes the need for an external network controller, shrinking BOM in industrial gateways. When designing with this part, plan PCB layout to keep the 50 MHz Ethernet traces short and impedance-controlled, and place the 12 MHz crystal within 0.25 inch of the OSC pins. Use MPLAB Harmony to configure the SQI timing and the Ethernet RMII/MII PHY interface. This page synthesizes distributor pricing, drop-in cross-references, and practical design notes not found on the manufacturer datasheet alone, giving engineers a faster way to evaluate the PIC32MZ2048ECG064-I/MR for new designs.

Devis Contact
PIC32MZ2048ECG064-I/PT - 200MHz 2MB Flash MCU w/ Ethernet | Microchip
PIC32MZ2048ECG064-I/PT

PIC32MZ2048ECG064-I/PT - 200MHz 2MB Flash MCU w/ Ethernet | Microchip

The Microchip PIC32MZ2048ECG064-I/PT is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at 200 MHz, with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It targets high-performance embedded connectivity applications that need on-chip Ethernet, USB, SQI, and RTCC peripherals. The part operates from 2.2 V to 3.6 V and is qualified over the industrial -40C to +85C temperature range. An MCU (microcontroller unit) is a single-chip processor that integrates a CPU core, program and data memory, and a rich set of peripherals (ADC, timers, communication controllers) onto one die. Within the taxonomy microcontroller -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ family -> embedded connectivity family, the PIC32MZ EC line is the higher-tier MIPS32 microAptiv part that sits between the cost-optimized PIC32MX line and the Floating Point Unit (FPU) PIC32MZ EF family. Understanding this hierarchy helps engineers locate firmware libraries (MPLAB Harmony), development boards, and datasheet documents. Key features include 2 MB of live-update Flash with an additional 160 KB of boot Flash, microMIPS mode for up to 35% smaller code size, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and a hardware crypto engine. The 64-pin TQFP exposes USB, 10/100 Ethernet MAC, SQI, CAN, six UART, four SPI, five I2C, PMP, and a 24-channel 10-bit ADC. The EC suffix denotes the Embedded Connectivity (no FPU) sub-family. Typical applications include industrial Ethernet gateways, networked HVAC controllers, USB peripherals, SQI Flash expansion, motor-control front-ends, and audio/graphics interfaces. The wide peripheral mix reduces external chip count for connected IoT designs. Design with the datasheet's recommended 2.2V-3.6V decoupling scheme (4.7uF + 0.1uF per VDD pin pair), respect trace-length matching on Ethernet MII/RMII, and use the datasheet's trace-length matching on USB DP/DM. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC32MZ2048ECG064T-I/MR - 32-bit 200MHz MCU, 2MB Flash | Microchip
PIC32MZ2048ECG064T-I/MR

PIC32MZ2048ECG064T-I/MR - 32-bit 200MHz MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECG064T-I/MR is a high-performance 32-bit MIPS32 microAptiv microcontroller running up to 200 MHz with 2 MB of Live-Update Flash and 512 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package. It integrates HS USB, Ethernet MAC, and a rich analog/digital peripheral set targeting graphics, audio, and connectivity applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a broad set of peripherals (ADC, timers, communication controllers, GPIO) into one package. The PIC32MZ EC family occupies the high-performance tier of Microchip's PIC32 portfolio, positioned between the lower-cost PIC32MX and the connectivity-optimized PIC32MZ EF families, and is commonly used where both computational throughput and connectivity (Ethernet, USB) are required. Key features include a 200 MHz core with 1.56 DMIPS/MHz performance, dual-panel Live-Update Flash for safe firmware switching, 53 GPIOs, a 12-bit ADC up to 1 MSPS, multiple UART/SPI/I2C interfaces, I2S for digital audio, and an integrated 10/100 Ethernet MAC. The integrated FPU and DSP extensions enable real-time signal processing for graphics and audio workloads. The device implements a superscalar microAptiv core with 5-stage pipeline and tightly-coupled SRAM for deterministic interrupt response. The dual Flash panel allows a live firmware swap without downtime, a unique feature for always-on industrial or networked systems. The 64-QFN package exposes the full set of peripherals while keeping the footprint at 9x9 mm with an exposed pad for thermal dissipation. Typical applications include industrial HMI panels with TFT displays, networked audio players and DSP amplifiers, Ethernet-connected IoT gateways, USB host/device embedded products, and low-cost graphics terminals. The combination of 2 MB Flash and 512 KB SRAM makes it suitable for full-feature rich applications and real-time graphics. When integrating this MCU, allocate the exposed pad (EP) as a solid copper region connected to ground for thermal and electrical performance. Use the trace-cache-tuned linker script from MPLAB Harmony for optimal Flash placement when running at 200 MHz. This page synthesizes distributor pricing, drop-in alternatives within the same 64-QFN package, and practical design notes not collected in a single place in the manufacturer datasheet.

Devis Contact
PIC32MZ2048ECG064T-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP
PIC32MZ2048ECG064T-I/PT

PIC32MZ2048ECG064T-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP

The Microchip Technology PIC32MZ2048ECG064T-I/PT is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running up to 200 MHz, integrating 2 MB of Flash program memory and 512 KB (some sources cite 524 KB) of SRAM in a 64-pin TQFP (10x10 mm) package. The device pairs a high-performance CPU core with HS USB, Ethernet MAC, multiple I2C/I2S/SPI/UART peripherals, LIN, and 24 channels of 12-bit analog-to-digital conversion, targeting connected-graphics, audio, and industrial HMI applications. Operating voltage spans 2.3 V to 3.6 V and the industrial-grade -I temperature range is -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich peripheral set into one package, allowing embedded systems to replace discrete logic with software-driven functionality. Within the broader taxonomy, the PIC32MZ EC family sits at the high-performance end of Microchip's 32-bit MCU portfolio, above PIC32MX and parallel to the EF family; it belongs to the larger class of embedded microcontrollers and, more generally, integrated circuits in the semiconductor hierarchy. This position gives engineers software compatibility with MPLAB Harmony and a strong ecosystem of middleware for TCP/IP, USB, graphics, and touch. Key features include a hardware crypto/hash engine, parallel master port for external bus/graphics, dedicated audio interfaces (I2S, LJ/DLJ, RJ), and Microchip's Peripheral Pin Select (PPS) which remaps digital peripherals onto almost any I/O. The EC variant emphasizes Ethernet connectivity plus Hi-Speed USB 2.0 On-The-Go, making it a common drop-in for IoT gateways and industrial controllers that need both wired and tethered USB connectivity. Live-Update Flash enables dual-bank firmware upgrades without external memory, useful for fail-safe field deployment. The 64-pin TQFP exposes 53 user I/Os, sufficient for color TFT-LCD panels, capacitive touch, and multiple serial ports. Typical applications include industrial automation controllers, smart energy/HEMS gateways, audio and graphics HMI panels, USB device/host peripherals, and Ethernet-connected sensor hubs. Design consideration: the 200 MHz core draws significant dynamic current, so place 100 nF decoupling on every AVDD/VDD pair and follow Microchip's recommended power-rail sequencing to avoid in-rush latch-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

Devis Contact
PIC32MZ2048ECG100-I/PF - 200MHz 32-bit MCU, 2MB Flash | Microchip
PIC32MZ2048ECG100-I/PF

PIC32MZ2048ECG100-I/PF - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECG100-I/PF is a high-performance 32-bit MIPS microcontroller built on the MIPS32 microAptiv core and packaged in a 100-pin TQFP (14x14 mm, 0.5 mm pitch). It runs up to 200 MHz, integrates 2 MB of Flash and 512 KB of SRAM, and provides a 12-bit ADC plus on-board Ethernet MAC for connected-embedded designs. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a wide-register CPU core with on-chip memory, analog peripherals, and communication interfaces. Within the broader taxonomy, this part sits at: microcontroller -> 32-bit MCU -> MIPS-class MCU -> high-performance connectivity MCU -> industrial/IoT-grade. PIC32MZ EC devices target embedded-connectivity applications where Ethernet, USB, and high-throughput DSP/control tasks are needed on a single die. Key features include 200 MHz core clock, 2 MB Flash (2M x 8), 512 KB SRAM, hardware Floating Point Unit (FPU), dedicated Ethernet MAC, multiple UART/SPI/I2C peripherals, dual 12-bit ADC modules, and a comprehensive Peripheral Pin Select (PPS) mapping scheme. The 100-TQFP package exposes 78+ I/O pins, supporting parallel bus interfaces and large pin-count peripherals needed for HMI and motor-control designs. The device is fabricated on a low-power CMOS process and integrates a 8-channel DMA controller, cryptographic acceleration, and flexible clock-tree options (HS PLL, FRC, LPRC). It supports trace and JTAG debug interfaces for non-intrusive software development, and the EC family is engineered for deterministic real-time response alongside high-bandwidth connectivity stacks (TCP/IP, USB, CAN). Typical applications include industrial Ethernet gateways, PLC and HMI controllers, smart-energy and metering nodes, embedded web servers, USB peripherals, and graphics/display controllers. The combination of 2 MB code space and Ethernet MAC also suits firmware-rich protocol bridges and IoT edge nodes. When designing with this part, confirm the operating temperature grade (-40C to +85C for the -I variant), pay attention to PPS configuration order to avoid accidental pin lockup, and ensure adequate decoupling near each VDD/VSS pair for sustained 200 MHz operation. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes that supplement the manufacturer datasheet - making it easier to evaluate sourcing, replacement, and PCB reuse options in one place.

Devis Contact
PIC32MZ2048ECG100-I/PT - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECG100-I/PT

PIC32MZ2048ECG100-I/PT - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECG100-I/PT is a high-performance 32-bit MIPS microAptiv MCU running at 200MHz with 2MB of Flash and 512KB of SRAM, housed in a 100-pin TQFP (12x12mm) package. It is part of the PIC32MZ Embedded Connectivity (EC) family targeting industrial, networking, and graphical HMI applications with class-leading 330 DMIPS and 3.28 CoreMark/MHz performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of peripherals (UART, SPI, I2C, timers, ADC, GPIO) on one piece of silicon. The 32-bit PIC32MZ line sits at the top of Microchip's PIC portfolio, using the MIPS32 microAptiv core paired with broad connectivity peripherals. PIC32 MCUs are widely used wherever high CPU throughput, large memory, and rich connectivity are required in a single device. Key features of the PIC32MZ2048ECG100-I/PT include integrated 10/100 Ethernet MAC, HS USB 2.0 host/device/OTG, six UART modules with LIN/IrDA, four SPI, five I2C, a 12-bit 5-MSPS ADC, a graphics-friendly parallel master port (PMP) for TFT/LCD panels, hardware crypto accelerators, and dual-panel live-update Flash support for in-field firmware upgrades without downtime. The 200MHz core is paired with tightly-coupled SRAM for deterministic real-time behavior. The architecture uses a 5-stage MIPS32 microAptiv pipeline with DSP extensions, code- and system-protection (KSEG0) via flash partition locks, and a dedicated FPU-less EC variant aimed at pure connectivity + GUI workloads. Peripheral DMA and dual-panel PMP enable direct video memory interfaces to common TFT-LCDs, while the ENVM and SQID crypto engines accelerate AES/SHA. Typical applications include industrial gateways and Modbus/IoT bridges, Ethernet-connected HMIs and operator panels, USB-based diagnostic and consumer devices, automotive infotainment sub-modules, and secure connected appliances. The 2MB Flash and 512KB SRAM are enough to host TCP/IP stacks (Microchip Harmony), SSL/TLS handshakes, and dual-image OTA storage. When designing with this device, ensure PCB layout follows the datasheet's decoupling and trace-length guidance for the Ethernet MII/RMII bus and place the HS USB 90-ohm differential pair per the USB 2.0 spec. The I/O supply is 3.3V; the internal core runs from an internal regulator, and unused pairs of PGECx/PGEDx can be reassigned as GPIO. This page synthesizes datasheet specifications, distributor pricing, same-family drop-in alternatives, and practical design notes that are not assembled together in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2048ECG100T-I/PT - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECG100T-I/PT

PIC32MZ2048ECG100T-I/PT - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECG100T-I/PT is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates high-speed connectivity peripherals including HS USB, Ethernet MAC, CAN, and graphics/audio interfaces, making it a member of the PIC32MZ Embedded Connectivity (EC) family. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, memory (Flash/SRAM), and peripherals on a single die. The PIC32MZ EC family sits at the top of Microchip's PIC32 line and is part of the broader MIPS32/M-Class hierarchy of high-performance microcontrollers used for embedded connectivity, graphics, and audio applications. Within the system taxonomy, MCUs belong to embedded processors, then microcontrollers, then 32-bit microcontrollers in the Integrated Circuits category. Key features include 78 user I/O pins, multiple analog and digital peripherals (ADC, comparators, digital filters, temperature sensor with +/-2 C accuracy), 4-wire JTAG debug, and in-circuit/in-application programming support. The device operates from 2.3V to 3.6V, making it compatible with 3.3V system designs. The EC family emphasizes high-throughput connectivity and HMI applications, with hardware dedicated for graphics LCD and audio codecs. Technically, the MIPS32 microAptiv core delivers 1.56 DMIPS/MHz with hardware multiply/divide and DSP extensions. The 200 MHz clock, combined with the 32-bit path and dual-bank Flash, supports deterministic real-time response for industrial HMI and audio pipelines. The peripheral set includes 4 SPI/I2S ports, 6 UART ports, an HS USB OTG controller, and an Ethernet MAC with RMII/MII support. Note: Microchip datasheet guidance indicates the EC family is not recommended for new designs and recommends migrating to the PIC32MZ EF (Floating Point Unit) family for new projects. Typical applications include industrial HMI panels with TFT LCD graphics, audio processing systems with I2S codec interfaces, USB/Ethernet-connected embedded devices, motor control with CAN, and IoT gateways. The wide peripheral integration reduces external component count for connected embedded systems. Designers should plan to migrate to the PIC32MZ EF family (e.g., PIC32MZ2048EFG100-I/PT) for new designs, since the EC family has been marked not recommended for new designs. The TQFP-100 footprint is shared with most PIC32MZ100/200-pin variants, easing reuse during migration. This page synthesizes drop-in alternatives within the PIC32MZ family, parametric comparisons with EF variants, and PCB-reuse guidance not found in any single Microchip datasheet.

Devis Contact
PIC32MZ2048ECG124-I/TL - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECG124-I/TL

PIC32MZ2048ECG124-I/TL - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECG124-I/TL is a high-performance 32-bit MIPS32 microAptiv microcontroller IC running at 200 MHz with 2 MB of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package. It belongs to the PIC32MZ Embedded Connectivity (EC) family, integrating an HS USB OTG controller, 10/100 Ethernet MAC, SQI, multiple UART/SPI/I2C, EBI/EMI, and a 12-bit 5 MSPS ADC into a single die for connected embedded applications. What is a PIC32MZ microcontroller? The PIC32MZ is Microchip's premium MIPS-based 32-bit MCU family, targeting high-end connectivity, graphics, and audio applications. Architecturally, the microAptiv core (MIPS32r3) supersedes earlier M4K cores with branch prediction, a coherent L1 cache subsystem, and DSP ASE extensions, providing up to 3.4 CoreMarks/MHz. The EC sub-family adds HS USB, Ethernet, and SQI for networked products; the EF sub-family further adds a hardware Floating Point Unit (FPU). The 124-pin VTLA package supports the largest peripheral mix in the family. Key specifications include a 200 MHz core clock with 83 DMIPS throughput, 2 MB Flash (2M x 8), 512 KB SRAM, an 8-channel DMA controller, and a Cryptographic Engine supporting AES, 3DES, SHA, MD5, and HMAC. Connectivity includes 6 UART, 4 SPI, 5 I2C, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC with MII/RMII, an External Bus Interface (EBI), and a Quad-SPI (SQI) interface for high-speed serial memory. The part is rated for industrial -40C to +85C operation and ships in lead-free 124-VTLA packaging. Typical applications include industrial IoT gateways, Ethernet-enabled HMI controllers, USB host/device embedded products, audio processing units, and graphical touch interfaces. The combination of 2 MB Flash and 512 KB RAM supports protocol stacks (TCP/IP, USB) plus real-time application firmware on a single device. Note: Microchip has marked the EC family "Not Recommended for New Designs" in favor of the EF (with FPU) and DA (Graphics) families, though the part remains in production and stocked at major distributors. When designing with this part, ensure all VDD/VSS pin pairs are connected (per datasheet requirement) and that PGECx/PGEDx pairs are matched for ICSP programming. Decoupling must follow the reference schematic: a 0.1 uF X7R per VDD plus a bulk 4.7 uF, placed within 3 mm of each pin pair. Use MPLAB Harmony framework for peripheral drivers. This page synthesizes distributor pricing, drop-in alternative MPNs from the PIC32MZ EF/EFH family that share the same VTLA-124 footprint, and practical design notes not found in the standalone datasheet — including a one-stop comparison table versus the recommended successors.

Devis Contact
PIC32MZ2048ECG124T-I/TL - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECG124T-I/TL

PIC32MZ2048ECG124T-I/TL - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECG124T-I/TL is a 32-bit single-core MIPS32 microAptiv PIC32MZ Embedded Connectivity (EC) family microcontroller IC operating at 200 MHz, integrating 2 MB (2M x 8) of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. The part is tape-and-reel packaged (TL suffix) and ships in the industrial -40C to +85C temperature grade. The microAptiv core delivers 330 DMIPS / 1.5 DMIPS/MHz while keeping power low. A 32-bit microcontroller (MCU) is a single-chip computer containing a 32-bit processor core, non-volatile program storage (typically Flash), volatile data memory (SRAM), and a rich set of programmable peripherals (timers, ADC, communication controllers). PIC32MZ devices are part of the MCU hypernym hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ EC family is the connectivity-oriented subset of the PIC32MZ lineup, optimized for wired connectivity (Ethernet, USB, CAN) and rich analog integration, distinct from the EF family that adds a hardware Floating-Point Unit. Key features include 2 MB Flash and 512 KB SRAM, 200 MHz core, integrated 10/100 Ethernet MAC, USB 2.0 OTG with HS PHY, two CAN 2.0b controllers, six UART, four SPI, five I2C, SQI, EBI/EMI, a 12-bit 18-channel 1.2 MSPS ADC, and a graphics-friendly PMP. The 124-pin VTLA package supports the largest pin-count options in the family, exposing the full peripheral set including the 32-bit external bus. The PIC32MZ EC architecture pairs the MIPS32 microAptiv core with a multi-channel DMA, a hardware crypto engine, and a dedicated 12-bit ADC. Code execution at 200 MHz combined with the wide peripheral set and 2 MB of Flash enables full TCP/IP stacks plus rich HMI on a single chip, eliminating external memory for many industrial applications. Typical applications include industrial Ethernet gateways, IoT edge nodes with USB device/host, motor control and factory automation controllers, automotive telematics and CAN bridges, audio and graphics HMI controllers, and embedded web server-side platforms. The integrated Ethernet MAC plus USB OTG is a frequent fit for connected industrial products. When designing with this device, ensure all VDD/VSS pins are connected per the datasheet - programming may fail if even one supply pin floats. Select the -I/TL industrial temperature variant for 0C-70C commercial-grade reliability is out of range. This page synthesizes distributor pricing, drop-in same-brand alternatives, cross-brand substitutes, and practical design notes drawn from the PIC32MZ EC family datasheet and reference manuals not found on a single manufacturer product page.

Devis Contact