Produits (39 000+)

LTC2392ILX-16 - 16-Bit 500ksps SAR ADC, 94dB SNR | Analog Devices
LTC2392ILX-16

LTC2392ILX-16 - 16-Bit 500ksps SAR ADC, 94dB SNR | Analog Devices

The Analog Devices LTC2392ILX-16 is a 16-bit, 500ksps successive approximation register (SAR) analog-to-digital converter with 94dB SNR, supplied in a 48-lead LQFP (7x7 mm) package. It operates from a single 5V supply and supports a true bipolar ±4.096V fully differential input range, delivering a maximum dynamic range of more than 19 effective bits at the full 500k samples per second throughput. An internal precision reference is included with a guaranteed 0.5% initial accuracy and a maximum temperature coefficient of ±20 ppm/°C, eliminating the need for an external reference component in most designs. A SAR (Successive Approximation Register) ADC converts a single analog sample to a digital code using a binary-search algorithm against an internal DAC, trading flash speed for high resolution with low power and zero pipeline latency. The LTC2392-16 sits in the precision data-acquisition tier of Analog Devices' ADC portfolio — between general-purpose successive-approximation parts and the higher-speed pipelined converters — and is widely deployed where accurate capture of slowly changing or wide-bandwidth signals is required without sacrificing throughput. Key feature highlights include simultaneous SPI-compatible serial and parallel data interfaces with no cycle latency, hardware-selectable nap and sleep power-down modes that reduce quiescent current to nanoampere levels between conversions, and fast full-scale settling that allows the device to react promptly to large input steps after power-down. The combination of ±4.096V true-differential inputs, internal reference, and 110 mW typical dissipation at 500ksps makes the part well suited to industrial process-control and instrumentation front-ends. The 48-pin LQFP-48 (7x7 mm) footprint is compatible with the LTC2392 family, and a commercial-grade variant (LTC2392CLX-16) covers the 0 °C to +70 °C window for cost-sensitive applications. Typical applications include high-speed industrial process monitoring, precision weigh scales, instrumentation and data acquisition boards, and motor control feedback loops. The wide bipolar input range and fast settling also suit the part for use in multiplexed channel scanning and medical instrumentation front-ends. When designing in the LTC2392ILX-16, pay attention to input common-mode and reference-decoupling layout; place 10 µF bypass capacitors as close as possible to the REFP, REFN, and VDD pins to realize the rated 94 dB SNR.

Devis Contact
LTC2393CUK-16 - 16-Bit 1Msps SAR ADC 94dB SNR | Analog Devices
LTC2393CUK-16

LTC2393CUK-16 - 16-Bit 1Msps SAR ADC 94dB SNR | Analog Devices

The Analog Devices LTC2393CUK-16 is a 16-bit, 1Msps successive-approximation-register (SAR) analog-to-digital converter (ADC) with 94dB SNR, housed in a 48-pin QFN (7x7) UK package. It accepts a single fully-differential analog input, integrates a precision internal reference (0.5% initial accuracy, ±20ppm/°C max temperature coefficient), and supports both parallel and serial interface modes with no cycle latency. An SAR ADC is a successive-approximation-register analog-to-digital converter, a class of data converter that uses a binary-search algorithm and an internal capacitive DAC to resolve each sample in a fixed number of clock cycles. In the broader signal-chain hierarchy, SAR ADCs sit between flash converters (faster but lower resolution) and sigma-delta ADCs (higher resolution but slower) and are favored for multiplexed data acquisition, motor control, and instrumentation loops where deterministic latency, moderate resolution, and high throughput are all required. Key features of the LTC2393CUK-16 include ±5V true bipolar input range with 94dB SNR and 16-bit no-missing-codes, an internal 4.096V reference that can be overdriven by an external reference, and wide 4.5V to 5.5V analog supply operation. The device also offers a flexible digital interface (parallel or serial LVCMOS), a low-drift internal reference, and a per-channel input span of ±VREF centered on common mode. Architecturally the converter uses a charge-redistribution SAR core that resolves 16 bits in a single conversion cycle, enabling 1Msps throughput with no pipeline delay. The internal reference is a low-noise bandgap with curvature compensation, and the analog input front-end is a true fully-differential switched-capacitor sampler with integrated input transient buffers. This topology makes the part tolerant of source-impedance variation and immune to charge kickback. Typical applications include high-speed industrial data acquisition, medical imaging front-ends, motor control current sensing, multichannel multiplexed instrumentation, and automated test equipment (ATE) digitizer cards. The wide input range simplifies signal conditioning when interfacing directly to ±10V sensors with external resistor dividers. When designing with this ADC, place the analog and digital ground planes in a star pattern and decouple the analog supply with a 10uF ceramic plus a 0.1uF capacitor placed within 5mm of the AVdd pin. Source-impedance above 50 ohms will degrade THD, so add a wideband buffer such as the LT6203 directly in front of the inputs. This page synthesizes distributor pricing, same-family alternatives, and practical design notes that go beyond the manufacturer datasheet to accelerate your LTC2393CUK-16 selection and bring-up.

Devis Contact
LTC2393HLX-16 - 16-Bit 1Msps SAR ADC, 94dB SNR, 48-LQFP | ADI
LTC2393HLX-16

LTC2393HLX-16 - 16-Bit 1Msps SAR ADC, 94dB SNR, 48-LQFP | ADI

The Analog Devices LTC2393HLX-16 is a 16-bit, 1Msps successive approximation register (SAR) analog-to-digital converter with 94.2 dB SNR (typical), housed in a 48-pin LQFP (7x7 mm) package. It operates from a single 5V analog supply and accepts a wide ±4.096V fully differential input range, maximizing dynamic range for high-performance signal acquisition. The device achieves ±2 LSB INL maximum with no missing codes at 16 bits, guaranteeing true 16-bit conversion integrity. What is a SAR ADC? A successive approximation register ADC is a precision data converter that uses a binary search algorithm through an internal DAC to digitize an analog input. SAR ADCs occupy the middle ground between high-speed flash converters and ultra-high-resolution delta-sigma ADCs, delivering low-latency, deterministic conversion with no pipeline delay. They sit within the broader hierarchy: data converter -> ADC -> SAR ADC -> precision mixed-signal IC, and are widely preferred when both speed and DC accuracy are required simultaneously. Key features include an integrated precision reference with 0.5% initial accuracy and ±20 ppm/°C maximum temperature coefficient, eliminating the need for an external reference. The part supports both parallel and serial interface modes with no cycle latency, and provides true 16-bit no-missing-codes performance across the entire operating range. Internal low-noise architecture achieves 94.2 dB typical SNR at the full 1Msps throughput. The LTC2393HLX-16 architecture combines a charge-redistribution capacitive DAC with a high-speed comparator and SAR logic, all clocked internally for low jitter. The differential input structure rejects common-mode noise and harmonic distortion, and the wide ±4.096V input range supports direct interfacing to industrial ±10V-scaled signals after attenuation. Single 5V operation simplifies power tree design in mixed-signal systems. Typical applications include precision industrial process control, medical instrumentation, seismic data acquisition, high-speed multichannel data acquisition systems, and ATE (automatic test equipment). The wide input range and high SNR make it well suited for vibration analysis, sonar front-ends, and spectrum analyzer input stages. When designing with this device, ensure the analog input common-mode voltage is biased near AVDD/2 and that the RC charge kick-back at the input is absorbed with an external buffer such as the LT6350. Decouple AVDD and DVDD independently with low-ESR ceramic capacitors placed close to the supply pins. This page synthesizes distributor pricing, drop-in SAR ADC alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
LTC2393ILX-16 - 16-Bit 1Msps SAR ADC 94dB SNR | Analog Devices
LTC2393ILX-16

LTC2393ILX-16 - 16-Bit 1Msps SAR ADC 94dB SNR | Analog Devices

The Analog Devices LTC2393ILX-16 is a 16-bit, 1Msps successive-approximation-register (SAR) analog-to-digital converter with 94 dB SNR, offered in a 48-pin LQFP (7x7 mm) industrial-temperature package. It integrates a precision internal reference (0.5% initial accuracy, ±20 ppm/°C max drift), a high-performance sample-and-hold, and both parallel and serial digital interfaces, all in a single chip. The device operates from a 5V analog supply and 2.5V to 5.25V digital I/O supply. A SAR ADC (successive-approximation-register analog-to-digital converter) is a type of Nyquist-rate data converter that resolves one bit per internal clock cycle using a binary-search algorithm against a precision DAC and comparator. SAR ADCs occupy the middle ground between flash converters (very fast but power-hungry and low resolution) and sigma-delta converters (very high resolution but limited to lower input bandwidth). The LTC2393ILX-16's 1 Msps throughput with no pipeline latency makes it ideal for multiplexed data acquisition, control loops, and instrumentation where deterministic single-cycle conversion latency is required. Key features include 94 dB SNR, 90 dB THD, ±2 LSB INL typical, and a wide input common-mode range. The internal reference eliminates external reference drift and layout burden, while the dual-interface (parallel + serial) gives PCB designers flexibility. The part supports daisy-chained readout on the serial interface, simplifying multi-channel designs. Typical aperture delay is well controlled for synchronous sampling. Architecture-wise, the LTC2393 uses a charge-redistribution DAC array and an internal low-noise reference buffer, with on-chip calibration logic that corrects capacitor mismatch at power-up. The combination of 1 Msps real sampling rate and 16-bit resolution delivers SNR figures approaching sigma-delta performance without the latency penalty, making the LTC2393ILX-16 a benchmark for precision industrial and instrumentation designers. Typical applications include industrial process control and data acquisition, precision weigh scales and force-meters, motor control feedback, vibration and acoustic analysis, and medical instrumentation front ends. The wide operating temperature range and integrated reference simplify designs where PCB area and component count matter most. Design consideration: ensure the analog and digital grounds are tied at a single star point beneath the IC. Bypass the AVDD and DVDD pins with 10 µF + 100 nF vacuum decay (VDEC) capacitors placed as close as possible to the package. The internal reference eliminates the need for an external REF, but the REFCOMP pin still needs a 10 µF hold capacitor for noise filtering. This page synthesizes distributor pricing as of 2026-10-13, drop-in alternatives sourced from the ADI/Linear Technology family and competitive web references, and practical design notes not found in the standalone manufacturer datasheet.

Devis Contact
LTC2393IUK-16 - 16-Bit 1Msps SAR ADC, 94dB SNR | Analog Devices
LTC2393IUK-16

LTC2393IUK-16 - 16-Bit 1Msps SAR ADC, 94dB SNR | Analog Devices

The Analog Devices LTC2393IUK-16 is a low-noise, high-speed 16-bit successive approximation register (SAR) analog-to-digital converter with 1Msps throughput and 94dB SNR, housed in a 48-lead QFN (7x7 mm, UK suffix) package. Operating from a single 5V analog supply, the part accepts a large fully-differential input range of plusmn 4.096V, making it well-suited to high-performance applications that demand maximum dynamic range per channel. The IUK-16 industrial-grade variant (operating from -40C to +85C) is supplied in a UK package finish compatible with the LTC2392 and LTC2391 SAR ADC families. What is a SAR ADC? A successive approximation register analog-to-digital converter is a precision data-conversion topology that performs one bit per clock cycle using a binary-search algorithm against an internal DAC. SAR ADCs sit in the taxonomy between flash converters (fastest, lowest resolution) and delta-sigma ADCs (slowest, highest resolution), occupying the sweet spot of 12-20 bits at 0.1-10 Msps with no latency and deterministic behavior - ideal for multiplexed data acquisition, motor control, and instrumentation. Key specifications include 94dB SNR at 1Msps for high dynamic-range capture, an internal precision reference with 0.5% initial accuracy and plusmn 20ppm/C (max) temperature coefficient that eliminates external reference components, plus both parallel and serial (SPI-/QSPI-/MICROWIRE-compatible) interface modes selected at power-up via the PAR/SER pin. The device draws approximately 14 mW active power at 1Msps and offers nap and sleep modes that bring quiescent consumption into the microamp range for battery-friendly operation. Architecturally, the LTC2393-16 uses a charge-redistribution DAC array with input sampling on dedicated fully-differential SWCAP front-ends, allowing common-mode rejection above 80 dB and preserving linearity across the full plusmn 4.096V differential input range. An integrated reference buffer drives the SAR core without requiring an external reference amplifier, simplifying the analog front end for both AC- and DC-coupled signal chains. Typical applications span precision industrial data acquisition, weigh scales and strain-gauge digitizers, process-control loopback I/O, high-speed medical instrumentation, vibration and seismic monitoring, and multi-channel multiplexed sensor front ends where its low latency and wide input range minimize front-end signal conditioning. When designing with the LTC2393IUK-16, ensure the analog and digital grounds meet only at the exposed pad, place 10uF + 0.1uF decoupling as close as possible to the AVDD/DVDD pins, and confirm the PAR/SER strapping option matches the host MCU/DSP/FPGA interface width before board bring-up. The optional CNVST-driven burst mode is useful when synchronizing multiple LTC2393s to a shared external clock. This page synthesizes distributor pricing, drop-in alternatives drawn from the same SAR ADC family, and practical design notes not collected in any single datasheet or catalog entry.

Devis Contact
LTC2415IGN - 24-Bit No Latency Delta Sigma ADC | Analog Devices
LTC2415IGN

LTC2415IGN - 24-Bit No Latency Delta Sigma ADC | Analog Devices

The Analog Devices LTC2415IGN is a 24-bit no-latency delta-sigma analog-to-digital converter with differential input and differential reference, housed in a 16-pin SSOP package. It delivers 2 ppm INL, 0.23 ppm RMS noise, and operates from a 2.7 V to 5.5 V supply while drawing only microamp-level quiescent current. A 24-bit delta-sigma ADC is a high-resolution converter that uses noise shaping and oversampling to achieve very high effective resolution at low sample rates. Delta-sigma ADCs are widely used in precision measurement, weighing scales, industrial process control, and temperature monitoring because they integrate a digital filter, modulator, and reference input in a single IC. Within the broader hierarchy, the LTC2415 belongs to the precision ADC category, itself part of the data converter product family under Analog Devices' signal-chain portfolio. Key features include differential input common-mode voltage V(INCM) and differential reference common-mode voltage V(REFCM) that can be independently set anywhere between GND and VCC, enabling true ratiometric measurements. The single-pin mode selection offers better than 110 dB input differential-mode 50 Hz / 60 Hz noise rejection, while the integrated oscillator eliminates the need for an external clock crystal. The serial SPI / MICROWIRE-compatible interface simplifies connection to microcontrollers, FPGAs, and digital isolators. The converter achieves single-cycle settling, which makes it suitable for multiplexed applications where input channels are switched between measurements. The integrated digital filter rejects line frequency noise by more than 110 dB in the 50 Hz / 60 Hz common-mode rejection mode, a key requirement for weighing scales and process instrumentation. The 0.23 ppm RMS noise floor and 2 ppm INL specification provide true 24-bit effective resolution for DC measurements. Typical applications include precision weighing scales, industrial process control, strain-gauge transducers, thermocouple and RTD temperature measurement, and battery-cell voltage monitoring. The differential input structure makes the part well-suited to bridge-sensor signal conditioning and medical instrumentation front-ends. When designing with the LTC2415IGN, observe the 2.7 V to 5.5 V supply range and place 0.1 µF bypass capacitors near the VCC pin to minimise digital noise coupling. For best 50/60 Hz rejection, hold the FO pin high and ground the CS pin to enter 110 dB common-mode rejection mode; the digital interface timing should respect the 256 ms conversion period at the maximum output rate of approximately 15 samples per second. This page synthesises distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found on the manufacturer datasheet alone, providing an actionable engineering reference for selecting and implementing the LTC2415IGN.

Devis Contact
LTC2415IGN#TRPBF - 24-Bit µPower Delta-Sigma ADC | ADI
LTC2415IGN#TRPBF

LTC2415IGN#TRPBF - 24-Bit µPower Delta-Sigma ADC | ADI

The Analog Devices LTC2415IGN#TRPBF is a 24-bit differential input, no-latency delta-sigma analog-to-digital converter housed in a 16-pin SSOP (GN) package. It operates from a 2.7V to 5.5V supply, achieves 2 ppm INL and 0.23 ppm RMS noise, and uses an integrated oscillator that eliminates the need for an external crystal or clock source. Single-cycle settling makes it ideal for multiplexed applications, while a single external pin can configure the LTC2415 for >110 dB input differential mode rejection at 50 Hz / 60 Hz. What is a delta-sigma ADC? A delta-sigma (ΔΣ) converter is a type of analog-to-digital converter that oversamples an input signal at a much higher rate than its Nyquist bandwidth and uses noise shaping to push quantization noise outside the signal band, then low-pass filters and decimates the result. The technique delivers very high resolution (16 to 32 bits) and excellent linearity at low frequencies, at the cost of conversion speed. Within the converter taxonomy, delta-sigma sits between successive-approximation register (SAR) ADCs (faster, lower resolution) and integrating ADCs (highest noise rejection at DC). The LTC2415 belongs to the no-latency ΔΣ family — every conversion produces a valid output without the pipeline delay found in many multi-bit ΔΣ parts. Key features include differential input and differential reference, on-chip oscillator, a 2.7 V – 5.5 V single supply, 24-bit output with 2 ppm INL, 0.23 ppm RMS noise (≈6 µV RMS at 5 V reference), and micropower operation. The common-mode voltage of both the input and the reference can be set independently anywhere between GND and VCC, easing bridge-, thermocouple-, and weigh-scale-style front ends. The architecture is a fourth-order delta-sigma modulator followed by a digital decimation filter; this topology is what gives the LTC2415 its single-cycle settling behavior and its exceptional normal-mode rejection at mains frequencies. Pin-for-pin and electrically compatible with the LTC2415-1 variant, this part is also a fit in 4-wire RTD and load-cell systems where the differential reference directly cancels ratiometric errors. Typical applications include precision weigh scales, strain-gauge bridges, thermocouple signal chains, 6-digit digital voltmeters, and battery-powered instrumentation. The wide common-mode range allows the ADC to digitize small differential signals riding on rails up to the full supply. When designing with the LTC2415IGN#TRPBF, note that its effective input range is bounded by the reference voltage — using a 5 V reference yields ±5 V differential input capability, while a 100 mV reference reduces it to ±100 mV. Place the reference and input bypass capacitors close to the pins and keep the digital SCK, SDO, and CS traces away from analog inputs to preserve the 0.23 ppm RMS noise floor. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes that go beyond what is reproduced in the manufacturer datasheet, giving engineers one place to evaluate sourcing, parametric fit, and PCB-level design choices for the LTC2415 family.

Devis Contact
LTC2451ITS8#TRMPBF - 16-Bit ΔΣ ADC, I2C, TSOT-23-8 | ADI
LTC2451ITS8#TRMPBF

LTC2451ITS8#TRMPBF - 16-Bit ΔΣ ADC, I2C, TSOT-23-8 | ADI

The Analog Devices LTC2451ITS8#TRMPBF is an ultra-tiny, 16-bit, delta-sigma analog-to-digital converter in an 8-pin TSOT-23 (3 mm × 2 mm) package, operating from a single 2.7 V to 5.5 V supply. It accepts a single-ended analog input, communicates through a standard I2C interface, and integrates an internal oscillator that requires no external timing components. The converter provides 16-bit output codes with a maximum output data rate of approximately 60 conversions per second. A delta-sigma ADC (also written ΔΣ ADC, sigma-delta ADC, or oversampling noise-shaping converter) is a type of analog-to-digital converter that uses high oversampling followed by digital decimation and noise shaping to achieve very high effective resolution at low bandwidths. The architecture trades input bandwidth for noise-free resolution, making ΔΣ ADCs the dominant choice for precision DC and low-frequency measurement in instrumentation, sensors, and battery monitoring. Within the data-converter hierarchy, the LTC2451 belongs to the precision-ADC family, which sits between high-speed successive-approximation (SAR) ADCs (>1 MSPS) and high-resolution integrating ADCs (>20 bits). Key features of the LTC2451 include integrated I2C addressing, a low quiescent supply current, an automatic shutdown between conversions that minimizes average power, and excellent DC accuracy (no missing codes at 16 bits). The TSOT-23-8 footprint occupies only 3 mm × 2 mm of PCB area, making the device one of the smallest precision ADCs available and an excellent fit for space-constrained sensor-interface applications. The device communicates via I2C with factory-programmable slave addresses selected by the I2C device address part suffix, enabling multiple LTC2451 devices on a single bus. Common-mode input range includes ground, allowing true zero-volt measurement in single-supply systems. The internal oscillator and digital filter settle a single conversion in approximately 16.6 ms without external components. Typical applications include portable instrumentation, weigh scales, direct temperature measurement with bridge sensors, gas and flow metering, isolated sensor front ends, battery monitors, and any precision microcontroller-based system that requires compact, low-power ADC functionality with a digital I2C bus. When designing with the LTC2451, place the decoupling capacitor as close as possible to the VDD pin and keep analog and digital ground returns short and joined at a single point to preserve noise-free 16-bit performance. The I2C lines should be pulled up to VDD with 2.2 kΩ to 10 kΩ resistors depending on bus speed and capacitance. This page synthesizes distributor pricing, verified drop-in alternatives, parametric comparisons, and practical design guidance that goes beyond a single datasheet reading, intended for engineers validating the LTC2451ITS8#TRMPBF for new designs or maintenance of existing single-supply precision-ADC subsystems.

Devis Contact
LTC2461CDD - 16-Bit I2C Delta-Sigma ADC | Analog Devices
LTC2461CDD

LTC2461CDD - 16-Bit I2C Delta-Sigma ADC | Analog Devices

The Analog Devices LTC2461CDD is an ultra-tiny, 16-bit delta-sigma analog-to-digital converter with an integrated 1.25V precision reference, packaged in a 12-pin DFN (3x3 mm) and accessed via an I2C-compatible serial interface. It operates from a single 2.7V to 5.5V supply, delivers single-ended 0V-to-1.25V input range measurements, and achieves 10 ppm/°C maximum reference temperature drift while consuming only a few hundred microamps during active conversion. The device is offered in the commercial 0°C to +70°C temperature grade, distinguished by the "C" suffix in the part number, and ships lead-free (PBF) compliant with RoHS. What is a delta-sigma ADC? A delta-sigma (ΔΣ) analog-to-digital converter oversamples an input signal at a rate much higher than Nyquist and uses noise-shaping digital filtering to push quantization noise out of the signal band, achieving high resolution (16 bits and beyond) at the cost of conversion speed. Delta-sigma ADCs sit in the broader category of analog-to-digital converters > data converters > signal chain ICs > semiconductors, and are the standard choice for low-frequency, high-precision measurements. Key features of the LTC2461 include an integrated 1.25V reference with 10 ppm/°C drift, 16-bit no-missing-codes performance, single-cycle conversion, automatic sleep between conversions to minimize quiescent current, and a simple I2C interface with pin-selectable addresses. The internal oscillator eliminates the need for an external clock, and the small DFN-12 (3x3 mm) footprint makes it ideal for space-constrained sensor modules and battery-powered instruments where PCB area is at a premium. Technically, the LTC2461 uses a proprietary multi-order delta-sigma modulator followed by a digital SINC1 filter, providing single-cycle settling at the output data rate. The internal reference is factory-trimmed and temperature-compensated, removing the need for an external precision reference. The I2C interface supports standard (100 kHz) and fast (400 kHz) modes and includes a chip-enable pin that allows up to two devices on the same bus, simplifying multi-channel sensor designs. Typical applications include portable instrumentation, weight scales and force sensors, temperature and pressure monitoring, industrial process control front-ends, and battery-powered sensor nodes. The ultra-low power and tiny footprint make it especially attractive for IoT edge devices and wearable health monitors where every square millimeter and microamp matters. When designing with the LTC2461, observe the I2C pull-up resistor sizing rules and decouple VDD with a 0.1 µF ceramic capacitor placed as close as possible to the VDD pin. The input signal should be kept within 0V to VREF (1.25V); for higher voltage inputs, an external resistive divider or buffer is required. Use the chip-enable pin to share the I2C bus with another LTC2461 or LTC2463 device for dual-channel systems. This page synthesizes distributor stock and pricing for the LTC2461CDD, drop-in alternative MPNs sharing the DFN-12 footprint, and practical design notes that supplement the manufacturer datasheet with selection guidance.

Devis Contact
LTC2461IDD - 16-Bit I2C ADC, 12-DFN Package | Analog Devices
LTC2461IDD

LTC2461IDD - 16-Bit I2C ADC, 12-DFN Package | Analog Devices

The Analog Devices LTC2461IDD is an ultra-tiny 16-bit delta-sigma analog-to-digital converter that combines a precision 1.25V integrated reference with an I2C serial interface in a 12-pin DFN (3 mm × 3 mm) package. It operates from a single 2.7 V to 5.5 V supply, accepts a single-ended 0 V to 1.25 V input, and delivers up to 16-bit resolution with no missing codes. The integrated reference exhibits 10 ppm/°C maximum drift and 0.1% initial precision, which lets the absolute displacement-error budget fit in 8-bit LSb at 25 °C. A delta-sigma ADC (also written delta-sigma or sigma-delta) is a type of oversampling converter that uses noise shaping to push quantization noise out of the baseband, enabling high effective resolution at low bandwidths without expensive laser-trimmed analog components. It belongs to the broader hierarchy of ADC (analog-to-digital converter) -> data converter -> mixed-signal IC -> semiconductor. The LTC2461's delta-sigma architecture paired with an integrated reference makes it well suited for compact, low-noise measurement front-ends where PCB real estate and BOM count are critical. Key features include 16-bit effective number of bits, 60 Hz output rate in 1x speed setting (up to 1.2 kHz in 2x), 1.25 V single-ended pseudo-differential input range, integrated 1.25 V reference with 2 ppm/°C typical drift, an I2C-compatible 2-wire serial interface with selectable addresses, internal oscillator, and automatic offset and full-scale calibration. The device continuously performs self-calibration, eliminating the need for external trimming while keeping total unadjusted error below a few LSb over temperature. The LTC2461IDD implements a proprietary charge-balancing modulator clocked by its own internal RC oscillator, so no external clock source is required. The output word rate is configurable via the I2C OBR (Output Rate) bit, and conversion results are available as standard 16-bit I2C read transactions. The 12-lead DFN package exposes the exposed pad for thermal and ground integrity. Typical uses include portable instrumentation, weigh scales, direct sensor digitisation for thermocouples and RTDs (with external front-end), battery-cell voltage monitoring in 3 V and 5 V systems, precision current sensing with a current-sense resistor, and consumer medical devices such as blood-pressure meters and glucose monitors. The integrated reference eliminates an extra IC in compact designs, and the I2C interface reduces microcontroller GPIO usage to two lines. When designing with the LTC2461IDD, place the 0.1 µF VDD bypass capacitor as close to the VDD pin as possible, and tie the GND exposed pad to a low-impedance ground pour to minimise digital return currents. For best noise performance, average multiple conversions in firmware and avoid switching the I2C SCL line near the ADC's acquisition window. This page combines distributor pricing, drop-in 12-DFN alternatives, comparison versus pinout-grade industry sources, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
LTC2486IDE#TR - 16-Bit 4-Ch Delta-Sigma ADC w/ PGA | ADI
LTC2486IDE#TR

LTC2486IDE#TR - 16-Bit 4-Ch Delta-Sigma ADC w/ PGA | ADI

The Analog Devices (formerly Linear Technology) LTC2486IDE#TR is a 16-bit, 4-channel (2-channel differential) No Latency Delta-Sigma analog-to-digital converter with Easy Drive technology, integrated PGA, and I2C/SPI-compatible serial interface, housed in a 14-pin DFN (4x3 mm) package. The patented sampling scheme eliminates dynamic input current errors through automatic cancellation of differential input current, allowing large external source impedances and rail-to-rail input signals to be digitized directly. An ADC (analog-to-digital converter) is a data acquisition integrated circuit that converts continuous analog voltage signals into discrete digital codes for processing by microcontrollers, FPGAs, or DSPs. Delta-Sigma (ΔΣ) ADCs use oversampling and noise-shaping to achieve high resolution at the cost of conversion speed. Within the broader hierarchy, the LTC2486 sits as: ADC -> data converter -> data acquisition IC -> signal chain IC -> semiconductor. The "No Latency" feature guarantees that the first conversion after a new channel selection is valid, simplifying multiplexed measurements versus conventional delta-sigma ADCs that require settling cycles. Key features include 16-bit resolution with no missing codes, an integrated programmable gain amplifier, wide common-mode input range (0V to VCC) independent of the reference voltage, simultaneous 50Hz/60Hz rejection, and an external differential reference input. Easy Drive technology permits rail-to-rail inputs with source impedances up to several kilohms, eliminating the need for on-chip input buffers and their charge-kickback errors. The internal architecture combines a third-order delta-sigma modulator, a sinc4 digital filter, and an on-chip oscillator. The integrated PGA (gain 1 to 256) lets low-level sensor signals (such as thermocouples or strain gauges) be amplified before conversion. The serial interface (SPI) supports daisy-chain connection of multiple LTC2486 devices on a single bus. Reference voltage can be differential and ratiometric to the analog supply. Typical applications include direct thermocouple digitization with cold-junction compensation, bridge pressure transducers, weight scales, industrial temperature measurement, gas sensors, and battery cell monitoring. The wide common-mode range makes it ideal for any single-ended or differential sensor with ground-referenced signals. In multi-channel data-acquisition boards the LTC2486's per-channel valid-first-conversion behavior simplifies firmware because the controller does not have to discard dummy conversions after switching MUX channels. A key design consideration is choosing the reference voltage: lower reference (e.g., 100mV to 1V) combined with PGA gain maximizes dynamic range for low-level signals, while a higher reference (up to VCC) maximizes absolute accuracy. The DFN-14 package requires careful PCB layout with a low-impedance ground pour under the exposed pad (pin 14) for thermal dissipation and noise immunity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select, source, and implement the LTC2486IDE#TR with confidence.

Devis Contact
LTC2493IDE - 24-Bit 4-Ch Delta-Sigma ADC with Easy Drive | ADI
LTC2493IDE

LTC2493IDE - 24-Bit 4-Ch Delta-Sigma ADC with Easy Drive | ADI

The Analog Devices LTC2493IDE is a 24-bit, 4-channel (2-channel differential) No Latency Delta-Sigma analog-to-digital converter with patented Easy Drive technology and a 2-wire I2C interface, housed in a 14-pin DFN (4x3 mm) package. The ADC integrates an on-chip temperature sensor delivering 1/30th °C resolution and 2 °C absolute accuracy, and accepts any common-mode input from 0 V to VCC independent of the reference voltage, simplifying bridge and thermocouple front ends. A delta-sigma (ΔΣ) ADC is a type of oversampling converter that uses noise-shaping and digital filtering to achieve very high resolution at low sample rates. It belongs to the broader hierarchy of analog-to-digital converters → data converters → mixed-signal ICs → semiconductors, and is widely used in precision measurement where DC accuracy and noise rejection matter more than raw speed. The Easy Drive input current cancellation scheme of the LTC2493 eliminates dynamic input current errors that plague conventional delta-sigma ADCs, removing the need for on-chip input buffers and their associated offset/settling trade-offs. Key features include 24-bit no-latency operation, automatic offset and full-scale calibration every conversion cycle independent of input channel, 2-wire I2C interface, integrated temperature sensor, and an external fO clock pin that allows the user to override the internal conversion clock to change output rate and digital filter notch placement. The device operates from a single 2.7 V to 5.5 V supply with low supply current suited to battery-powered instrumentation. The architecture combines a multi-order delta-sigma modulator with a SINC4 digital filter, achieving excellent 50 Hz/60 Hz power-line rejection at default output rates and the ability to reject 50 Hz/60 Hz interference at custom rates by driving fO. The first conversion after a channel change is valid to full specification. Typical applications include precision weigh scales, strain-gauge bridges, thermocouple temperature measurement, industrial process control, and battery-powered portable instrumentation. The wide common-mode range and Easy Drive inputs make the LTC2493IDE particularly attractive for direct connection to resistive sensors and low-voltage bridges. Design consideration: drive the LTC2493IDE with a low-thermal-reference such as the LTC6655, and route the analog ground as a separate pour. Use a 0.1 µF ceramic bypass capacitor within a few millimeters of the supply pin to preserve noise performance. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes that are not found in the manufacturer datasheet alone.

Devis Contact
LTC2662HUH-12#PBF - 5Ch 12-bit Current-Source DAC | Analog Devices
LTC2662HUH-12#PBF

LTC2662HUH-12#PBF - 5Ch 12-bit Current-Source DAC | Analog Devices

The Analog Devices LTC2662HUH-12#PBF is a 5-channel, 12-bit current-source digital-to-analog converter (DAC) that delivers five high-compliance current source outputs with a guaranteed 1 V dropout at 200 mA, housed in a 32-pin QFN (5x5 mm) package. Each output draws its current from a dedicated positive supply pin that accepts 2.85 V to 33 V, supporting load voltages up to 32 V and full-scale outputs up to 300 mA with eight per-channel programmable current ranges. Multiple channels can be paralleled for combined outputs up to 1.5 A, and internal 12 ohm switches allow any output pin to connect to an optional negative V- supply and sink up to 80 mA. A current-source DAC (also called a current-output DAC or IDAC) is a digital-to-analog converter whose output stage delivers a programmable current rather than a voltage. In the signal-chain taxonomy it sits below general-purpose DACs and above simple current mirrors: IDAC -> DAC -> data converter -> signal chain IC -> semiconductor. This category is the preferred building block when the load itself has a well-defined compliance voltage and the application requires precise, fast, and noise-immune current programming, such as LED biasing, laser diode drivers, and programmable current sources in test instruments. The LTC2662 integrates a precision reference, per-channel range registers, and a high-compliance output stage on a single die. The device operates over the -40 C to +125 C automotive/industrial temperature range and includes a serial peripheral interface (SPI) for digital configuration. The wide 32 V compliance and 200 mA continuous per-channel capability eliminate the need for external op-amp current boosters in many applications, while the parallelable architecture scales to multi-amp systems. The QFN-32 (5x5) package exposes a thermal pad that must be soldered to a ground copper pour for rated thermal performance. Typical applications include laser diode drive, LED biasing and dimming, programmable current sources, solenoid/actuator drive, and process-control instrumentation where bipolar or unipolar high-compliance currents are required. The 32 V compliance directly supports 28 V nominal industrial buses, while the 80 mA sink capability handles thermistor or Peltier biasing. When designing with this DAC, treat each output as an independent current source with its own V+ pin; use Kelvin-sense layout when load currents exceed 100 mA. Decouple every V+ pin with a 1 uF ceramic plus 10 uF bulk capacitor, and parallel outputs by tying OUT_x pins together before the load to achieve higher currents with matched range settings. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives in the QFN-32 footprint, and practical design notes not consolidated in the Analog Devices datasheet.

Devis Contact
LTC2662HUH-16#PBF - 16-Bit 5-Ch 300mA Current-Source DAC | ADI
LTC2662HUH-16#PBF

LTC2662HUH-16#PBF - 16-Bit 5-Ch 300mA Current-Source DAC | ADI

The Analog Devices LTC2662HUH-16#PBF is a 16-bit, five-channel current-source digital-to-analog converter (DAC) housed in a 32-pin QFN (5x5 mm) package, providing five high-compliance current source outputs with a guaranteed 1 V dropout at 200 mA and load voltage support up to 32 V. The LTC2662 family delivers 5 independently programmable channels of monotonic 16-bit (or 12-bit) current-output DAC with SoftSpan architecture that allows output ranges from 3 mA to 300 mA full-scale, all sharing the same 32-QFN footprint. What is a current-source DAC? A current-output digital-to-analog converter converts a digital code into a precise analog current, rather than voltage. Within the data-converter hierarchy, the LTC2662 belongs to the DAC family, more specifically current-steering or current-source DACs, which are widely used to drive laser diodes, precision actuators, programmable current bias, and process-control loops. Compared with voltage-output DACs, current-output parts eliminate output buffers and headroom-loss, allowing the load to sit at a high compliance voltage while the DAC itself drops just 1 V. Key features of the LTC2662HUH-16#PBF include guaranteed 1 V dropout at 200 mA per channel, 32 V load compliance, per-channel SoftSpan programmable full-scale current from 3 mA to 300 mA, a wide supply range (AVDD up to 5.5 V, load rail up to 32 V), and a flexible serial SPI-compatible interface with per-channel readback. The device uses a precision internal reference and offers daisy-chain capability for multi-device synchronization. The architecture is built around five matched current cells steered by a 16-bit segmented architecture. The internal reference and precision thin-film resistors deliver INL of approximately 1 LSB and DNL of ±0.5 LSB on the -16 grade. The wide compliance window (1 V to 32 V headroom over the load) lets the LTC2322662 directly drive H-bridges, optocouplers, and laser diodes without external driver stages. Typical applications include laser-diode driver bias for telecom and instrumentation, programmable current sources for industrial process control, optical attenuators, precision actuator drive in medical and test equipment, and 4 mA to 20 mA / 0 mA to 20 mA loop-driving when combined with an external boost stage. The 32-QFN footprint fits dense PCB designs and keeps channel-to-channel thermal coupling manageable. Design tip: decouple the AVDD pin with a 10 uF + 100 nF pair placed within 5 mm of the IC, and reserve a small copper island under the exposed pad to draw heat out of the package when more than two channels are operated near 200 mA. Ensure the load path returns to the LTC2662's GND to avoid ground-loop errors in the high-compliance current output. This page synthesizes DigiKey/Mouser distributor pricing, drop-in same-package variants, and application-specific design notes not available in the manufacturer datasheet alone.

Devis Contact
LTC2846IG - 3.3V Multiprotocol Transceiver w/ Termination | Analog Devices
LTC2846IG

LTC2846IG - 3.3V Multiprotocol Transceiver w/ Termination | Analog Devices

The Analog Devices LTC2846IG is a 3-driver/3-receiver multiprotocol transceiver with on-chip cable termination, housed in a 36-pin SSOP (Industrial Grade) package. Operating from a single 3.3V supply, it supports software-selectable protocols including RS232, RS449, EIA530, EIA530-A, V.35, V.36 and X.21, with a 1ku list price starting from $19.21 as of 2026-10-08. An RS-232/RS-422/RS-485 multiprotocol transceiver is a single-chip interface IC that combines multiple line-driver and receiver channels, allowing one hardware design to be reconfigured in software between legacy serial standards. The transceiver family (LTC2844/LTC2845/LTC2846) is typically deployed in DTE or DCE serial port designs where a single physical connector must handshake with many types of legacy equipment, and on-chip termination removes the need for external resistor networks on V.35/V.36/X.21 lines. Key features include 3 drivers and 3 receivers, on-chip cable termination resistors, software-selectable protocol mode via logic pins, integrated 1.2MHz boost switching regulator that converts the 3.3V supply to 5V for V.35/V.36/X.21 driver levels, and TUV Rheinland NET1/NET2/TBR2 certification. The Industrial Grade (-40C to +85C) temperature rating supports telecom and industrial environments, while the SSOP-36 footprint integrates easily into legacy backplane designs. The architecture combines a digital mode-control block, an on-chip boost regulator (1.2MHz), six terminated line drivers/receivers, and charge pumps for RS-232 compliance. This integration reduces the typical discrete BOM of a multiprotocol port from ~40 components to a single IC plus a few passive components. Typical applications include multiprotocol serial ports in WAN routers, telecom DSU/CSU equipment, V.35/V.36/X.21 line cards, industrial serial gateways, and legacy-to-modern serial protocol converters. When paired with the LTC2844 (clock/data transceiver) or LTC2845 (control-signal transceiver) it forms a complete software-selectable DTE/DCE port. For design, ensure the MODE_SELECT pins are driven through low-capacitance logic and that the boost regulator output (V+ pin) is bypassed with at least 10uF ceramic + low-ESR electrolytic to meet V.35 driver rise/fall time specifications.

Devis Contact
LTC2850HMS8#TRPBF - 3.3V 20Mbps RS485/RS422 Transceiver | ADI
LTC2850HMS8#TRPBF

LTC2850HMS8#TRPBF - 3.3V 20Mbps RS485/RS422 Transceiver | ADI

The Analog Devices LTC2850HMS8#TRPBF is a low-power 3.3V RS485/RS422 transceiver in an 8-pin MSOP package, supporting data rates up to 20 Mbps with half-duplex (1 driver / 1 receiver) operation. The receiver offers one-eighth unit load, enabling up to 256 nodes on a single bus (C-, I-grade), and integrates a failsafe feature that guarantees a logic-high output under floating or shorted input conditions. The driver maintains high output impedance across the entire common-mode range when disabled, ensuring robust multi-node bus behavior. An RS485/RS422 transceiver is a physical-layer interface IC that converts between the differential signaling used on industrial twisted-pair buses and the single-ended logic levels used by UARTs, MCUs, and FPGAs. RS485 supports multipoint half/full-duplex buses over long distances (up to 1200 m), while RS422 is typically point-to-point. The LTC2850 belongs to the broader line transceivers -> interface ICs -> integrated circuits taxonomy and is part of the LTC2850/LTC2851/LTC2852 family from Analog Devices (formerly Linear Technology). Key features include ±15 kV ESD protection on the bus pins (H-grade designation), thermal shutdown, short-circuit protection, and a wide common-mode range that exceeds the RS485 standard requirement. The H-suffix variant specifies the high-ESD rating and the -40 °C to +125 °C automotive temperature grade, making it suitable for harsh industrial and automotive environments. Its 3.3V supply operation minimizes power dissipation in battery-powered and point-of-load regulated systems. The architecture uses a differential line driver with slew-rate-limited outputs to reduce EMI while still delivering 20 Mbps throughput. Internal hysteresis on the receiver inputs combined with the failsafe circuit ensures clean logic transitions even with significant bus attenuation or noise. The device draws low quiescent current, allowing many transceivers to share a single 3.3V rail without thermal concerns. Typical applications include industrial fieldbus networks (Modbus, Profibus DP), building automation (BACnet, RS485 lighting control), automotive body and chassis networks, point-of-sale terminals, and long-cable RS422 point-to-point links. The wide common-mode range also supports harsh electrically noisy environments such as motor drives and factory automation. When designing with this part, place 100 nF decoupling capacitors as close as possible to the VCC pin and provide proper cable termination (typically 120 Ω) at both ends of the bus. The half-duplex topology requires that only one driver be enabled at a time; software UART flow control or hardware direction-control timing must enforce this to avoid contention. This page consolidates distributor pricing, drop-in pin-compatible alternatives, and practical PCB/EMI design notes that go beyond what is typically printed in the manufacturer datasheet, helping engineers shorten design cycles.

Devis Contact
LTC2852IMS#PBF - 3.3V 20Mbps RS485/RS422 Transceiver | ADI
LTC2852IMS#PBF

LTC2852IMS#PBF - 3.3V 20Mbps RS485/RS422 Transceiver | ADI

The Analog Devices LTC2852IMS#PBF is a low-power, 3.3V full-duplex RS485/RS422 transceiver rated for 20 Mbps signaling and housed in a 10-pin MSOP package. It features a one-eighth unit-load receiver input (supporting up to 256 nodes per bus on C- and I-grade devices), integrated hot-swap capable driver outputs, and a failsafe receiver that guarantees a logic-high output under floating, shorted, or terminated bus conditions. An RS485/RS422 transceiver is a differential line driver/receiver IC that translates between a single-ended UART/logic interface and a twisted-pair differential bus, enabling robust, long-reach, noise-immune communication in industrial, building-automation, and instrumentation systems. The LTC2852 belongs to the broader RS-422/RS-485 interface IC category (sub-category of Interface ICs) within the broader semiconductor power management and signal-chain ecosystem. Its 3.3V supply aligns with modern low-voltage MCUs and FPGAs, eliminating the level shifters required by legacy 5V transceivers. Key features include 3.3V single-supply operation, 20 Mbps data rate, 1/8th unit load (256-node fan-out on C/I grade), integrated hot-swap/tolerant driver outputs that remain high-impedance across the full common-mode range when disabled, low current per package (500 µA typical supply current), and industry-standard RS485/RS422 pinout. The MSOP-10 footprint enables compact node designs typical of multi-drop industrial backbones. Internally, the LTC2852 uses a precision differential line driver with slew-rate-limited edges (for low EMI) and a window-comparator receiver topology that detects 200 mV differential signals as required by TIA/EIA-485. The one-eighth unit-load input impedance reduces bus loading by 8× compared to legacy 1-unit-load parts, allowing more nodes on the same bus without exceeding the 32-unit-load RS485 specification limit. Typical applications include industrial fieldbus networks (Modbus, Profibus DP at 20 Mbps), building automation (BACnet MS/TP, lighting control), point-of-sale peripherals, multi-drop motor controller links, and RS422 point-to-point communication between embedded controllers and sensors. Designers choose the LTC2852 when they need a 3.3V-only transceiver with a small package, robust hot-swap performance, and high node count. When designing with this device, place 100 nF supply bypass capacitors within 5 mm of the VCC pin, use a 100 Ω termination resistor at each bus end, and verify common-mode protection in electrically noisy environments. The #PBF suffix denotes a lead-free, RoHS-compliant finish. This page synthesizes distributor pricing, parametric alternates, and practical design notes that complement - and go beyond - the manufacturer datasheet's nominal spec table.

Devis Contact
LTC2862AIS8-2 - ±60V RS485/RS422 Transceiver | Analog Devices
LTC2862AIS8-2

LTC2862AIS8-2 - ±60V RS485/RS422 Transceiver | Analog Devices

The Analog Devices LTC2862AIS8-2 is a low-power, half-duplex RS485/RS422 transceiver with ±60V fault protection, operating on 3V to 5.5V supplies and housed in an 8-pin SOIC package. It supports two speed grades selectable via part variant: 20Mbps (the -2 suffix denotes a high-speed version) or 250kbps, with 1/1 driver/receiver count. The interface pins withstand ±60V overvoltage faults during all modes of operation including power-down. An RS485/RS422 transceiver is a physical-layer device that converts between a single-ended UART/CMOS logic signal on the microcontroller side and a robust differential signal on the bus side, enabling reliable serial communication over twisted-pair cables at distances up to 1200 meters. RS485 is the de-facto standard for industrial multipoint buses (Modbus RTU, Profibus, DMX512) while RS422 is used for point-to-point high-speed links; the LTC2862 family supports both. Half-duplex means one differential pair is shared between transmit and receive, with direction controlled by a logic pin. Key features include ±60V fault tolerance on the bus pins, IEC 61000-4-2 Level 4 ESD protection (typically 8 kV contact, 15 kV air per the manufacturer's IEC ESD rating), current-limited drivers, thermal shutdown, and a fully balanced differential receiver threshold for low duty-cycle distortion. The 8-pin SOIC package is pin-compatible with legacy LT1785/LT1791 footprints and the original LTC2862 family, enabling direct board replacement. The LTC2862A uses a CMOS process with switched-capacitor charge pump to generate the ±60V fault-tolerant driver supply. The architecture delivers low quiescent current during idle while still maintaining high drive strength during bus arbitration, and the receiver exhibits 250 mV typical hysteresis with a 50 mV worst-case offset to meet TIA/EIA-485-A. Typical applications include industrial fieldbus networks (Modbus, Profibus), solar inverter monitoring, building automation (BACnet), motor control encoder links, and any 3V-5V MCU interface that must survive miswiring, ESD strikes, or transient overvoltage events on long cable runs. The wide 3V-5.5V supply range also supports battery-powered remote sensor nodes. When designing with this device, place 100 nF decoupling close to VCC and use twisted-pair cable with proper termination (120 Ω) at the bus ends. The -2 suffix denotes 20 Mbps high-speed grade; the -1 variant is 250 kbps low-EMI grade - select based on your data rate and EMI budget.

Devis Contact
LTC2863IS8-1 - ±60V Fault-Protected RS485/RS422 Transceiver | ADI
LTC2863IS8-1

LTC2863IS8-1 - ±60V Fault-Protected RS485/RS422 Transceiver | ADI

The Analog Devices LTC2863IS8-1#PBF is a ±60V fault-protected, 3V to 5.5V supply, full-duplex RS485/RS422 transceiver housed in an 8-pin SOIC (IS8) package. Per the manufacturer datasheet, it integrates one driver and one receiver (1/1), supports data rates up to 20 Mbps, and tolerates ±60V on the bus pins without damage, a level that exceeds the typical RS485 common-mode range of -7V to +12V by a wide margin. A transceiver is a semiconductor device that bridges two distinct electrical interfaces, in this case translating between low-voltage CMOS logic on the controller side and the differential, bus-terminated signaling required by the RS485/RS422 standard. RS485/RS422 transceivers sit inside the broader interface-IC hierarchy: interface IC > line driver/receiver > differential transceiver > RS485/RS422 transceiver. The LTC2863 family is positioned for harsh industrial bus networks where hot-plug events, wiring faults, and surge exposure are routine. Key features include ±60V fault protection on driver outputs and receiver inputs, ±25V HBM ESD protection on the bus pins, 1/8 unit load (up to 256 nodes per bus), current-limited drivers with thermal shutdown, and a fully balanced differential receiver threshold that minimizes duty-cycle distortion. The -1 suffix denotes the full-duplex (no shared DE/RE control timing constraint) pinout variant in the 8-lead SOIC; the -2 variant differs in enable logic. Per the manufacturer datasheet, MP-grade (-55°C to 125°C) and DFN package options are also available in the LTC2863 family. Architecturally, the device combines a differential line driver with a wide-input-range differential receiver, both protected by on-chip TVS-style clamping structures. The 3V-5.5V VCC range allows direct connection to 3.3V or 5V microcontrollers without level shifters, simplifying BOM and reducing board area. Pin compatibility with the LT1785 and LT1791 families (per Analog Devices product page) means existing designs can be ruggedized against field faults with no layout rework. Typical applications include industrial fieldbus networks (Modbus, Profibus, BACnet), building automation, motor drive feedback links, smart-grid metering, and any long-cable RS485 link exposed to installation transients or mis-wiring. The ±60V tolerance protects against accidental AC mains contact on the bus. When laying out the LTC2863IS8-1, keep the bus traces short and matched, place the bus termination at the end nodes, and provide a solid ground plane; the IC's internal fault protection does not replace good EMC practice. Use a 100nF decoupling capacitor close to VCC and add a 10µF bulk capacitor if the supply is shared with switching regulators.

Devis Contact
LTC2870IFE - RS232/RS485 Multiprotocol Transceiver | Analog Devices
LTC2870IFE

LTC2870IFE - RS232/RS485 Multiprotocol Transceiver | Analog Devices

The Analog Devices LTC2870IFE is a pin-configurable multiprotocol transceiver supporting RS232, RS485, and RS422 on shared I/O lines, operating from a single 3V to 5.5V supply in a 28-pin TSSOP-EP package. The device integrates switchable termination resistors, configurable as two single-ended RS232 transceivers or one differential RS485/RS422 transceiver, with 2/2 (driver/receiver) channel count. A multiprotocol transceiver is a mixed-standard interface IC that allows a single port to communicate over multiple physical-layer protocols (RS232 point-to-point, RS485/RS422 multi-drop differential). The LTC2870 belongs to the transceiver -> line driver/receiver -> interface IC -> integrated circuit hierarchy. This protocol flexibility reduces BOM count when a system must support both legacy RS232 equipment and modern differential RS485 industrial fieldbuses without two separate transceivers. Key features include ±15 kV ESD protection on the transceiver I/O pins (HBM), integrated switchable RS485 120 ohm termination, full-duplex and half-duplex RS485 modes, slew-rate-limited RS485 driver for low EMI, and a wide common-mode range exceeding the RS485 requirement. The exposed pad (TSSOP-EP) package improves thermal dissipation for high-load industrial environments. Logic inputs are 5V tolerant when operating from 3.3V supply, simplifying level shifting with MCUs and FPGAs. Technically, the LTC2870 uses charge-pump technology for RS232 ±5V drivers while running from a single low-voltage rail, and a precision differential line driver for RS485/RS422. Internal logic configures the protocol by setting mode pins; the shared bus pins are reorganized between single-ended and differential operation without external switching. The receiver features 25 mV typical hysteresis for noise immunity on long RS485 cables. Typical applications include industrial programmable logic controllers (PLCs) with mixed RS232/RS485 ports, point-of-sale (POS) terminals, building automation gateways, multi-protocol instrumentation, and HVAC controllers. The integrated termination eliminates external resistor networks and improves field reliability. When designing with this part, place 0.1uF decoupling capacitors close to VCC pins and connect the exposed pad to a low-impedance ground plane for thermal and EMI performance. Verify mode-pin logic levels match the selected protocol during firmware development to avoid bus contention.

Devis Contact
LTC2870IFE#PBF - RS232/RS485 Multiprotocol Transceiver | Analog Devices
LTC2870IFE#PBF

LTC2870IFE#PBF - RS232/RS485 Multiprotocol Transceiver | Analog Devices

Analog Devices LTC2870IFE#PBF is a robust pin-configurable multiprotocol transceiver supporting RS232, RS485, and RS422 protocols from a single 3V to 5.5V supply, housed in a 28-pin TSSOP-EP (FE) package. The LTC2870 integrates one RS485 differential transceiver and two RS232 single-ended transceivers on shared I/O lines, with automatic integrated termination resistor selection. According to the Analog Devices LTC2870/LTC2871 datasheet, the device supports data rates up to 20 Mbps for RS485 and 500 kbps for RS232, with ±25 kV ESD (HBM) protection on the bus pins. An RS232/RS485 multiprotocol transceiver is an interface IC that bridges a UART, microcontroller, or processor to a physical serial bus. The RS232 standard uses single-ended signaling (logic-high and logic-low on separate lines with ±5V to ±15V swings) and is common in point-to-point links to legacy PCs and industrial controllers. The RS485 standard uses differential signaling (A-B differential voltage) and enables multipoint half-duplex or full-duplex networks up to 1200 m with up to 32 unit loads. Multiprotocol transceivers combine both physical layers on shared pins so a single PCB footprint can serve multiple end-equipment variants, reducing BOM and qualification cost. Key features of the LTC2870 include shared I/O lines between RS232 and RS485 modes, automatic or logic-controlled 120 ohm RS485 termination, ±25 kV ESD HBM on the bus I/O pins, hot-swap glitch protection, and a low-current shutdown mode. The integrated loopback mode allows self-test of the RS232 path without external cabling. The single 3V to 5.5V supply eliminates the negative charge pump traditionally required for RS232, simplifying power tree design. Typical applications include industrial multipoint fieldbus nodes, point-of-sale terminals, RS232-to-RS485 protocol converters, and any system that must communicate to both legacy RS232 equipment and modern RS485 networks. The TSSOP-EP package provides low thermal resistance for reliable operation at the extended industrial temperature range. When designing with the LTC2870, the shared I/O pins require careful PCB routing to avoid coupling between RS232 single-ended and RS485 differential traces; the exposed pad must be soldered to a thermal copper pour for specified thermal performance.

Devis Contact
LTC2875HS8#PBF - 60V Fault-Protected CAN Transceiver | ADI
LTC2875HS8#PBF

LTC2875HS8#PBF - 60V Fault-Protected CAN Transceiver | ADI

The Analog Devices LTC2875HS8#PBF is a robust, high-speed, low-power CAN (Controller Area Network) transceiver that operates from a 3.3V or 5V supply and features ±60V overvoltage fault protection on the bus pins during all modes of operation, including power-down. The device supports data rates up to 4 Mbps (CAN FD capable) and is housed in an 8-pin SOIC (HS8) package. Per the Analog Devices LTC2875 datasheet, the part is intended for 3.3V or 5V CAN networks requiring tolerance to large common-mode transients such as load-dump events in 12V/24V automotive or industrial systems. What is a CAN transceiver? A CAN transceiver is an interface IC that sits between a CAN protocol controller (typically a microcontroller) and the physical differential two-wire CAN bus (CANH/CANL). It converts the controller's CMOS/TTL TX/RX logic into the differential dominant/recessive signaling required by ISO 11898-2/ISO 11898-5, providing ESD and overvoltage robustness, common-mode rejection, and the bus-level protection that the controller itself cannot supply. The LTC2875 belongs to the interface IC -> transceiver IC -> CAN bus transceiver category inside the broader CAN bus driver / CAN FD transceiver family. Key features include ±60V bus fault protection, ±25kV ESD (HBM) on the CANH/CANL pins, ISO 11898-2 and ISO 11898-5 conformance, low current shutdown mode, SPLIT pin for recessive stabilization, and a wide supply range of 3V to 5.5V. The driver output stage is internally slew-rate limited and guarantees VSYM (driver symmetry) so the part can be used in CAN FD frames up to 4 Mbps. The LTC2875 combines an NPN/PNP bipolar bus driver with a precision differential receiver and a charge-pump-assisted protection rail that clamps bus voltages above and below the supply rails. The integrated ±60V fault path is active even in shutdown and power-off states, an important differentiator versus conventional CAN transceivers that lose protection when VCC collapses. Typical applications include automotive body and chassis ECUs, industrial CAN nodes with long cabling exposed to 24V/48V supply transients, building automation and HVAC CAN networks, and any 3.3V or 5V MCU-based system that must survive miswiring or load-dump events on the bus. When designing with this part, place 100nF supply decoupling as close as possible to VCC and add TVS diodes (or use the part's integrated ±60V clamp) to guarantee fault survival. The SPLIT pin typically requires a 10kΩ/1nF RC network to ground for proper recessive-bias stabilization per the datasheet typical application circuit. This page synthesizes distributor pricing, drop-in 8-SO alternatives, and practical fault-protection design notes that are not collected in any single manufacturer datasheet, helping engineers select, source, and lay out the LTC2875HS8#PBF with confidence.

Devis Contact
LTC6078IDD - Dual CMOS R2R Op Amp, 25µV Vos | Analog Devices
LTC6078IDD

LTC6078IDD - Dual CMOS R2R Op Amp, 25µV Vos | Analog Devices

The Analog Devices LTC6078IDD is a dual-channel, micropower precision CMOS operational amplifier that delivers rail-to-rail input and output swing in a 10-lead DFN (3 mm × 3 mm) package. It combines a trimmed 25 µV maximum input offset voltage, a 0.7 µV/°C maximum offset drift, and a 750 kHz gain-bandwidth product while consuming only 0.55 mA of quiescent supply current per amplifier. The CMOS input stage draws less than 50 pA of bias current, making the part suitable for high-impedance sensor front-ends. Background: an operational amplifier (op amp) is a DC-coupled, high-gain electronic voltage amplifier with differential inputs and, typically, a single-ended output. Rail-to-rail (R2R) op amps are a specialized class whose input common-mode range and output voltage swing can approach both supply rails, allowing designers to maximize dynamic range in low-voltage single-supply systems. Within the analog signal chain hierarchy, the LTC6078IDD sits between sensors/transducers and ADC input buffers, conditioning millivolt-level signals before digitization. The LTC6078IDD features a slew rate of 0.05 V/µs, 113 dB open-loop gain (typical), 13 nV/√Hz input voltage noise density at 1 kHz, and 1.5 mA output drive capability. It operates from a single 2.5 V to ±5 V supply (4 V to 18 V total) and is fully specified over the -40 °C to +85 °C industrial temperature range. The DFN-10 (DD) package exposes a thermal pad that lowers junction-to-ambient thermal resistance. The architecture combines a precision input chopper-stabilized front-end with a class AB output stage, eliminating the crossover distortion common to R2R designs. This dual-stage topology gives the part its rare combination of sub-25 µV offset, sub-50 pA bias current, and rail-to-rail swing - parameters that historically required trade-offs. Typical applications include battery-powered instrumentation, precision sensor signal conditioning (thermocouples, strain gauges, pH probes), medical instrumentation, A/D converter input buffers, and handheld test equipment. The low 0.55 mA/amp supply current also makes it useful for solar-powered remote sensor nodes. When designing with the LTC6078IDD, the exposed pad (pin 11) must be soldered to the PCB ground plane for thermal dissipation and rated input common-mode performance. Designers should keep input traces short and guarded when amplifying microvolt-level signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
LTC6226HS6#TRMPBF - 420MHz, 1nV/√Hz Low-Noise Op Amp | ADI
LTC6226HS6#TRMPBF

LTC6226HS6#TRMPBF - 420MHz, 1nV/√Hz Low-Noise Op Amp | ADI

The Analog Devices LTC6226HS6#TRMPBF is a very fast, low-noise, rail-to-rail output, unity-gain-stable single operational amplifier housed in a 6-pin TSOT-23 (S6) package. It delivers a gain-bandwidth product of 420 MHz, a slew rate of 180 V/μs, and an ultra-low input-referred voltage noise of 1 nV/√Hz, with distortion below -90 dBc for 4 V_P_P signals at 1 MHz. The HS6 suffix indicates the -40°C to +125°C automotive/extended-industrial operating temperature grade, while the #TRMPBF suffix denotes a 500-unit mini-reel Pb-free tape-and-reel package. A rail-to-rail output operational amplifier (RRIO op amp) is an analog IC whose output voltage can swing within millivolts of both supply rails, maximizing dynamic range in low-voltage single-supply systems. Op amps belong to the broader hierarchy of linear integrated circuits → amplifiers → operational amplifiers → high-speed amplifiers → low-noise precision amplifiers, and they sit inside the power management and signal-chain families of any mixed-signal system. This category matters because every sensor, ADC, DAC, and reference buffer ultimately depends on a clean, fast op amp to translate real-world signals into usable voltages. Key differentiators of the LTC6226HS6 include its 1 nV/√Hz input noise density (among the lowest for GBW > 400 MHz devices), 180 V/μs slew rate that enables 1 MHz large-signal operation, and -90 dBc SFDR at 1 MHz for 4 V_P_P outputs, making it a benchmark for high-dynamic-range signal chains. The combination of unity-gain stability, rail-to-rail output swing, and 420 MHz GBW in a TSOT-23-6 footprint is unusual: most competing parts sacrifice either bandwidth, noise, or output swing. Typical applications include 16-bit and 18-bit ADC input buffers, transimpedance amplifiers (TIAs) for photodiodes and ultrasound, high-speed line drivers, active filters, and precision instrumentation front-ends where low noise and high linearity coexist. The 5.5 mA quiescent supply current is acceptable for these performance levels. The TSOT-23-6 footprint allows the LTC6226 to drop directly onto boards originally laid out for the LTC6252 family. When designing with this part, ensure the load is referenced to ground within the output swing range and place a 0.1 μF X7R decoupling capacitor within 5 mm of the supply pin to preserve PSRR. The shutdown pin (SHDN) lets you reduce quiescent current to microamp levels during standby, which is valuable in battery-powered test equipment. This page synthesizes distributor pricing from DigiKey and Mouser, cross-reference alternatives verified against the Analog Devices LTC6226/6227 datasheet, and engineering design notes that complement the manufacturer application information.

Devis Contact