2EDL900G3XTMA1 vs 2EDL8034G4CXTMA1 Comparaison
Comparaison détaillée côte à côte de 2EDL900G3XTMA1 par Infineon et 2EDL8034G4CXTMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | 2EDL900G3XTMA1 | 2EDL8034G4CXTMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,20 | $1,55 |
| Product Type | Dual-channel level-shift gate driver IC | — |
| Topology Supported | Half-bridge, high-side, low-side | — |
| Isolation Type | Junction isolation (JI), 120 V | Junction-isolated (level-shifted) |
| Number of Channels | 2 (high-side + low-side) | — |
| Peak Source Current | 4 A | 3 A |
| Peak Sink Current | 6 A | 4 A |
| Drive Output Voltage Range | 4 V to 16 V | — |
| Supply Voltage (VDD/VBS) | 4 V to 16 V | — |
| Switching Device Supported | Si MOSFET, enhancement-mode GaN FET | — |
| Configurable Deadtime | Yes (programmable) | — |
| Integrated Current Sense Amplifier | Yes | — |
| PWM Modes | Tri-state, HSCC HS, HSCC LS, Hi/Li, Hi/Li inverted | — |
| Input Logic Compatibility | 3.3 V / 5 V / TTL (per datasheet) | 3.3 V / 5 V |
| Boîtier | TSNP-16 (3x3 mm) with exposed pad | PG-VDSON-10-2 (DSN-10) with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Niveau MSL | 1 | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant | — |
| Driver Type | — | Half-Bridge (High-Side / Low-Side) |
| Configuration | — | Non-Inverting |
| Bootstrap Voltage (Max) | — | 120 V |
| Nombre de sorties | — | 2 |
| Rise Time (Typical) | — | [DATA_NEEDED: rise time ns] |
| Fall Time (Typical) | — | [DATA_NEEDED: fall time ns] |
| Propagation Delay (Typical) | — | [DATA_NEEDED: propagation delay ns] |
| VCC Supply Voltage | — | [DATA_NEEDED: VCC range V] |
| UVLO Protection | — | Yes (VCC and VBS) |
| ESD Rating (HBM) | — | [DATA_NEEDED: ESD HBM kV] |
| Température de jonction en fonctionnement | — | -40 C to +125 C |
| Lead-Free / RoHS | — | Yes (per Infineon product page) |