AD5142ABCPZ100-RL7 vs AD5142ABCPZ10-RL7 Perbandingan
Perbandingan bersamaan detil AD5142ABCPZ100-RL7 dari Analog Devices dan AD5142ABCPZ10-RL7 dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ AktifAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | AD5142ABCPZ100-RL7 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Analog Devices Inc. | — |
| Part Number | AD5142ABCPZ100-RL7 | — |
| Fungsi | Digital Potentiometer (DigiPOT) | — |
| Number of Circuits | 2 (dual) | — |
| Number of Taps | 256 per channel | 256 positions |
| Nominal Resistance (R-AB) | 100 kΩ | — |
| Resistor Tolerance | ±8% | ±8% |
| Antarmuka | I²C-compatible | I²C-compatible (SCL up to 3 MHz) |
| Memory | Nonvolatile EEPROM (wiper position retained) | — |
| Wiper Resistance (RW) | 40 Ω at end positions (typical) | — |
| Current Density (A, B, W pins) | ±6 mA maximum | — |
| Supply Voltage (Single) | 2.3 V to 5.5 V | — |
| Suhu Kerja | -40 °C to +125 °C | -40 °C to +125 °C |
| Paket | 16-LFCSP (3 mm x 3 mm) with exposed pad | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper / Taper Type | Linear | — |
| Packaging | Tape & Reel (RL7 = 7-inch reel) | — |
| Status RoHS | Compliant | Compliant |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Wiper Position Readback | Yes (via I²C) | — |
| EEPROM Endurance | [DATA_NEEDED: write cycles] | — |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Tipe Memori | — | Non-volatile EEPROM |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Tipe Mounting | — | Surface Mount |
| Taper | — | Linear |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |