AD7663ASTZ vs AD7606C-16BSTZ Comparaison
Comparaison détaillée côte à côte de AD7663ASTZ par Analog Devices et AD7606C-16BSTZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD7663ASTZ | AD7606C-16BSTZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,20 | $49,22 |
| Résolution | 16 bit | 16 bit |
| Fréquence d'échantillonnage | 250 kSPS | — |
| Architecture | SAR (PulSAR charge-redistribution) | SAR ADC, 16-bit, 8-channel simultaneous sampling |
| Number of Input Channels | 1 | — |
| Input Type | Differential (true bipolar ±10 V, 0-5 V, 0-10 V software-selectable) | True bipolar, single-ended |
| Analog Supply Voltage (AVDD) | 4.75 V to 5.25 V (5 V typical) | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 5.25 V | — |
| INL (Non-linéarité intégrale) | ±3 LSB max (0.0046% of full scale) | — |
| SNR (Signal-to-Noise Ratio) | 90 dB typ @ 100 kHz input | — |
| THD (Total Harmonic Distortion) | -100 dB typ @ 100 kHz input | — |
| Data Interface | Parallel / Serial (software-selectable) | — |
| Power Dissipation | 35 mW typ @ 250 kSPS (5 V) | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40 °C to +125 °C |
| Boîtier | 48-pin LQFP (7x7 mm), ST suffix | 64-LQFP (10x10 mm) with exposed pad (BSTZ suffix) |
| Type de montage | Surface Mount | — |
| Niveau MSL | 3 (168 hours floor life) | MSL 3 (168 hours) |
| Statut RoHS | Compliant (Pb-free ST suffix) | — |
| Throughput (Parallel Mode) | 250 kSPS | — |
| Throughput (Serial Mode) | 200 kSPS | — |
| Input Impedance | [DATA_NEEDED: input impedance at IN+/IN-] | — |
| Aperture Delay | [DATA_NEEDED: aperture delay] | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Number of Channels | — | 8 single-ended (simultaneous sampling) |
| Sample Rate (per channel) | — | 1 MSPS |
| Analog Input Range (bipolar) | — | ±10 V, ±5 V |
| Analog Input Range (unipolar) | — | 0 V to 5 V, 0 V to 10 V |
| Analog Input Impedance (RIN) | — | 5 MΩ |
| Analog Supply Voltage (AVCC) | — | 4.75 V to 5.25 V (single 5 V supply) |
| Digital I/O Supply (VDRIVE) | — | 2.3 V to 5.25 V |
| On-chip Reference | — | 2.5 V, low-drift, internal reference buffer |
| PGA / Input Conditioning | — | Analog input clamp protection + PGA + LPF per channel |
| Digital Interface | — | Parallel, SPI, QSPI, MICROWIRE (3-wire serial) |
| Digital Filter | — | Configurable oversampling / sinc filter |
| Compliance | — | ROHS3 Compliant, REACH Unaffected |