AD7663ASTZ vs AD7606C-16BSTZ Vergleich
Detaillierter Direktvergleich von AD7663ASTZ von Analog Devices und AD7606C-16BSTZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD7663ASTZ | AD7606C-16BSTZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $11,20 | $49,22 |
| Auflösung | 16 bit | 16 bit |
| Abtastrate | 250 kSPS | — |
| Architecture | SAR (PulSAR charge-redistribution) | SAR ADC, 16-bit, 8-channel simultaneous sampling |
| Number of Input Channels | 1 | — |
| Input Type | Differential (true bipolar ±10 V, 0-5 V, 0-10 V software-selectable) | True bipolar, single-ended |
| Analog Supply Voltage (AVDD) | 4.75 V to 5.25 V (5 V typical) | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 5.25 V | — |
| INL (Integrale Nichtlinearität) | ±3 LSB max (0.0046% of full scale) | — |
| SNR (Signal-to-Noise Ratio) | 90 dB typ @ 100 kHz input | — |
| THD (Total Harmonic Distortion) | -100 dB typ @ 100 kHz input | — |
| Data Interface | Parallel / Serial (software-selectable) | — |
| Power Dissipation | 35 mW typ @ 250 kSPS (5 V) | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | -40 °C to +125 °C |
| Gehäuse | 48-pin LQFP (7x7 mm), ST suffix | 64-LQFP (10x10 mm) with exposed pad (BSTZ suffix) |
| Montageart | Surface Mount | — |
| MSL-Level | 3 (168 hours floor life) | MSL 3 (168 hours) |
| RoHS-Status | Compliant (Pb-free ST suffix) | — |
| Throughput (Parallel Mode) | 250 kSPS | — |
| Throughput (Serial Mode) | 200 kSPS | — |
| Input Impedance | [DATA_NEEDED: input impedance at IN+/IN-] | — |
| Aperture Delay | [DATA_NEEDED: aperture delay] | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Number of Channels | — | 8 single-ended (simultaneous sampling) |
| Sample Rate (per channel) | — | 1 MSPS |
| Analog Input Range (bipolar) | — | ±10 V, ±5 V |
| Analog Input Range (unipolar) | — | 0 V to 5 V, 0 V to 10 V |
| Analog Input Impedance (RIN) | — | 5 MΩ |
| Analog Supply Voltage (AVCC) | — | 4.75 V to 5.25 V (single 5 V supply) |
| Digital I/O Supply (VDRIVE) | — | 2.3 V to 5.25 V |
| On-chip Reference | — | 2.5 V, low-drift, internal reference buffer |
| PGA / Input Conditioning | — | Analog input clamp protection + PGA + LPF per channel |
| Digital Interface | — | Parallel, SPI, QSPI, MICROWIRE (3-wire serial) |
| Digital Filter | — | Configurable oversampling / sinc filter |
| Compliance | — | ROHS3 Compliant, REACH Unaffected |