AD7663ASTZ vs AD7606C-16BSTZ 比較
詳細な並列比較: AD7663ASTZ メーカー: Analog Devices および AD7606C-16BSTZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD7663ASTZ | AD7606C-16BSTZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $11.20 | $49.22 |
| 分解能 | 16 bit | 16 bit |
| サンプリングレート | 250 kSPS | — |
| Architecture | SAR (PulSAR charge-redistribution) | SAR ADC, 16-bit, 8-channel simultaneous sampling |
| Number of Input Channels | 1 | — |
| Input Type | Differential (true bipolar ±10 V, 0-5 V, 0-10 V software-selectable) | True bipolar, single-ended |
| Analog Supply Voltage (AVDD) | 4.75 V to 5.25 V (5 V typical) | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 5.25 V | — |
| INL（積分非直線性） | ±3 LSB max (0.0046% of full scale) | — |
| SNR (Signal-to-Noise Ratio) | 90 dB typ @ 100 kHz input | — |
| THD (Total Harmonic Distortion) | -100 dB typ @ 100 kHz input | — |
| Data Interface | Parallel / Serial (software-selectable) | — |
| Power Dissipation | 35 mW typ @ 250 kSPS (5 V) | — |
| 動作温度範囲 | -40 °C to +85 °C | -40 °C to +125 °C |
| パッケージ | 48-pin LQFP (7x7 mm), ST suffix | 64-LQFP (10x10 mm) with exposed pad (BSTZ suffix) |
| 実装タイプ | Surface Mount | — |
| MSLレベル | 3 (168 hours floor life) | MSL 3 (168 hours) |
| RoHS ステータス | Compliant (Pb-free ST suffix) | — |
| Throughput (Parallel Mode) | 250 kSPS | — |
| Throughput (Serial Mode) | 200 kSPS | — |
| Input Impedance | [DATA_NEEDED: input impedance at IN+/IN-] | — |
| Aperture Delay | [DATA_NEEDED: aperture delay] | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Number of Channels | — | 8 single-ended (simultaneous sampling) |
| Sample Rate (per channel) | — | 1 MSPS |
| Analog Input Range (bipolar) | — | ±10 V, ±5 V |
| Analog Input Range (unipolar) | — | 0 V to 5 V, 0 V to 10 V |
| Analog Input Impedance (RIN) | — | 5 MΩ |
| Analog Supply Voltage (AVCC) | — | 4.75 V to 5.25 V (single 5 V supply) |
| Digital I/O Supply (VDRIVE) | — | 2.3 V to 5.25 V |
| On-chip Reference | — | 2.5 V, low-drift, internal reference buffer |
| PGA / Input Conditioning | — | Analog input clamp protection + PGA + LPF per channel |
| Digital Interface | — | Parallel, SPI, QSPI, MICROWIRE (3-wire serial) |
| Digital Filter | — | Configurable oversampling / sinc filter |
| Compliance | — | ROHS3 Compliant, REACH Unaffected |