AD8001ANZ vs AD842JN Comparaison
Comparaison détaillée côte à côte de AD8001ANZ par Analog Devices et AD842JN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD8001ANZ | AD842JN |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Channels | 1 channel | — |
| Bandwidth | 800 MHz | — |
| Slew Rate | 1200 V/us | [DATA_NEEDED: slew rate] |
| Gain Flatness | 0.1 dB to 100 MHz | — |
| Power Consumption | 50 mW | — |
| Dual Supply Voltage Range | Up to +/-6 V | — |
| Single Supply Voltage Range | 6 V to 12 V | — |
| Nominal Operating Supply | +/-5 V | — |
| Plage de température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | 6 uA | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | 5.5 mV | [DATA_NEEDED: input offset voltage] |
| Boîtier | 8-pin PDIP, 0.300 inch wide | 14-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Evaluation Board | AD8001-EB | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Supply Voltage Range | — | +/-5 V to +/-18 V |
| Minimum Output Current Drive | — | 100 mA |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |