AD8001ANZ vs AD842JN Karşılaştırma
Ayrıntılı yan yana karşılaştırma AD8001ANZ tarafından Analog Devices ve AD842JN tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | AD8001ANZ | AD842JN |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Channels | 1 channel | — |
| Bandwidth | 800 MHz | — |
| Slew Rate | 1200 V/us | [DATA_NEEDED: slew rate] |
| Gain Flatness | 0.1 dB to 100 MHz | — |
| Power Consumption | 50 mW | — |
| Dual Supply Voltage Range | Up to +/-6 V | — |
| Single Supply Voltage Range | 6 V to 12 V | — |
| Nominal Operating Supply | +/-5 V | — |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | 6 uA | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | 5.5 mV | [DATA_NEEDED: input offset voltage] |
| Paket | 8-pin PDIP, 0.300 inch wide | 14-pin PDIP |
| Montaj Türü | Through-hole | Through-hole |
| Evaluation Board | AD8001-EB | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Supply Voltage Range | — | +/-5 V to +/-18 V |
| Minimum Output Current Drive | — | 100 mA |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |