AD8001ANZ vs AD842JN Perbandingan
Perbandingan bersamaan detil AD8001ANZ dari Analog Devices dan AD842JN dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD8001ANZ | AD842JN |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Channels | 1 channel | — |
| Bandwidth | 800 MHz | — |
| Slew Rate | 1200 V/us | [DATA_NEEDED: slew rate] |
| Gain Flatness | 0.1 dB to 100 MHz | — |
| Power Consumption | 50 mW | — |
| Dual Supply Voltage Range | Up to +/-6 V | — |
| Single Supply Voltage Range | 6 V to 12 V | — |
| Nominal Operating Supply | +/-5 V | — |
| Rentang Suhu Kerja | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | 6 uA | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | 5.5 mV | [DATA_NEEDED: input offset voltage] |
| Paket | 8-pin PDIP, 0.300 inch wide | 14-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Evaluation Board | AD8001-EB | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Supply Voltage Range | — | +/-5 V to +/-18 V |
| Minimum Output Current Drive | — | 100 mA |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |