ADM485ANZ vs MAX485EESA+ Comparaison
Comparaison détaillée côte à côte de ADM485ANZ par Analog Devices et MAX485EESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActifComparaison des spécifications
| Paramètre | ADM485ANZ | MAX485EESA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Differential RS-485/RS-422 line transceiver | RS-485/RS-422 Transceiver |
| Tension d'alimentation | 5 V | — |
| Maximum Data Rate | 5 Mbit/s | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Communication Standard | EIA RS-485 and RS-422 | — |
| Bus Architecture | Bidirectional multipoint bus | — |
| Signal Type | Balanced differential | — |
| Boîtier | 8-pin PDIP | — |
| Type de montage | Through-hole | Surface Mount |
| Temperature Range | Commercial and industrial | — |
| Power Class | Low-power | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Débit de données | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Boîtier / Format | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Niveau MSL | — | 1 (Unlimited) |