ADM485ANZ vs MAX485EESA+ तुलना

विस्तृत दोनों ओर की तुलना ADM485ANZ द्वारा Analog Devices और MAX485EESA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM485ANZ ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ ✓ सक्रिय
Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM485ANZ MAX485EESA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Differential RS-485/RS-422 line transceiver RS-485/RS-422 Transceiver
सप्लाई वोल्टेज 5 V —
Maximum Data Rate 5 Mbit/s —
Transceiver Configuration 1 transmitter and 1 receiver —
Communication Standard EIA RS-485 and RS-422 —
Bus Architecture Bidirectional multipoint bus —
Signal Type Balanced differential —
पैकेज 8-pin PDIP —
माउंटिंग प्रकार Through-hole Surface Mount
Temperature Range Commercial and industrial —
Power Class Low-power —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Driver Output Current [DATA_NEEDED: driver output current] —
सप्लाई करंट [DATA_NEEDED: supply current] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
RoHS स्थिति [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
डेटा दर — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Driver Slew Rate — Limited (low-EMI)
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
पैकेज / केस — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSL स्तर — 1 (Unlimited)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध