ADM485ANZ vs MAX485EESA+ 比較
詳細な並列比較: ADM485ANZ メーカー: Analog Devices および MAX485EESA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ADM485ANZ | MAX485EESA+ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Differential RS-485/RS-422 line transceiver | RS-485/RS-422 Transceiver |
| 電源電圧 | 5 V | — |
| Maximum Data Rate | 5 Mbit/s | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Communication Standard | EIA RS-485 and RS-422 | — |
| Bus Architecture | Bidirectional multipoint bus | — |
| Signal Type | Balanced differential | — |
| パッケージ | 8-pin PDIP | — |
| 実装タイプ | Through-hole | Surface Mount |
| Temperature Range | Commercial and industrial | — |
| Power Class | Low-power | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| データレート | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| パッケージ / ケース | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| MSLレベル | — | 1 (Unlimited) |