BCM6123TD1E5126T0R vs BCM6123TD1E5126T01 Comparaison
Comparaison détaillée côte à côte de BCM6123TD1E5126T0R par Vicor et BCM6123TD1E5126T01 par Vicor. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BCM6123TD1E5126T0R | BCM6123TD1E5126T01 |
|---|---|---|
| Marque | Vicor | Vicor |
| Catégorie | DC-DC Converters | DC-DC Converters |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $155,10 | $130,25 |
| Topologie | BCM Bus Converter Module (fixed-ratio isolated DC-DC) | Sine Amplitude Converter (SAC), isolated fixed-ratio |
| Boîtier | 6123 ChiP through-hole (63.34 x 22.80 x 7.21 mm) | Through-hole ChiP (BCM6123) |
| Plage de tension d'entrée | 260 V to 410 V DC (nominal 380 V) | 260 V to 410 V |
| Tension de sortie | 47.5 V DC nominal (8.1-51.3 V SELV family range) | — |
| Output Current | 25.7 A continuous | — |
| Output Power | Approximately 1.2 kW continuous at full load | — |
| Peak Efficiency | 97.9% | 97.9% |
| Power Density | 1876 W/in3 | 1876 W/in³ |
| Isolation Voltage | 4242 VDC | — |
| Transformation Ratio (K) | 1/8 (K=1/8) | 1/8 (K=1/8) |
| Switching Topology | Vicor ZVS/ZCS sine amplitude converter | — |
| Control Interface | Analog (Rev T suffix) | — |
| Parallel Operation | Yes - supports multi-kW arrays | Supported for multi-kW arrays |
| Protections | OV, OC, UV, short-circuit, thermal shutdown | OV, OC, UV, short circuit, thermal |
| Type de montage | Through-hole ChiP | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to +125°C (see derating curves) |
| MTBF | [DATA_NEEDED: MTBF figure] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Nominal Input Voltage | — | 380 V |
| Output Voltage (nominal) | — | 47.5 V |
| Continuous Output Current | — | 25.7 A |
| Continuous Output Power | — | 1220 W (47.5 V x 25.7 A) |
| Isolation Voltage (Input to Output) | — | 4242 VDC |
| Device Grade | — | T01 (telemetry/control) |
| Cooling Method | — | Forced air or cold-plate recommended for full load |