BCM6123TD1E5126T0R vs BCM6123TD1E5126T01 Comparación
Comparación detallada lado a lado de BCM6123TD1E5126T0R por Vicor y BCM6123TD1E5126T01 por Vicor. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BCM6123TD1E5126T0R | BCM6123TD1E5126T01 |
|---|---|---|
| Marca | Vicor | Vicor |
| Categoría | DC-DC Converters | DC-DC Converters |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $155,10 | $130,25 |
| Topología | BCM Bus Converter Module (fixed-ratio isolated DC-DC) | Sine Amplitude Converter (SAC), isolated fixed-ratio |
| Encapsulado | 6123 ChiP through-hole (63.34 x 22.80 x 7.21 mm) | Through-hole ChiP (BCM6123) |
| Rango de tensión de entrada | 260 V to 410 V DC (nominal 380 V) | 260 V to 410 V |
| Tensión de salida | 47.5 V DC nominal (8.1-51.3 V SELV family range) | — |
| Output Current | 25.7 A continuous | — |
| Output Power | Approximately 1.2 kW continuous at full load | — |
| Peak Efficiency | 97.9% | 97.9% |
| Power Density | 1876 W/in3 | 1876 W/in³ |
| Isolation Voltage | 4242 VDC | — |
| Transformation Ratio (K) | 1/8 (K=1/8) | 1/8 (K=1/8) |
| Switching Topology | Vicor ZVS/ZCS sine amplitude converter | — |
| Control Interface | Analog (Rev T suffix) | — |
| Parallel Operation | Yes - supports multi-kW arrays | Supported for multi-kW arrays |
| Protections | OV, OC, UV, short-circuit, thermal shutdown | OV, OC, UV, short circuit, thermal |
| Tipo de montaje | Through-hole ChiP | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40°C to +125°C (see derating curves) |
| MTBF | [DATA_NEEDED: MTBF figure] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Nominal Input Voltage | — | 380 V |
| Output Voltage (nominal) | — | 47.5 V |
| Continuous Output Current | — | 25.7 A |
| Continuous Output Power | — | 1220 W (47.5 V x 25.7 A) |
| Isolation Voltage (Input to Output) | — | 4242 VDC |
| Device Grade | — | T01 (telemetry/control) |
| Cooling Method | — | Forced air or cold-plate recommended for full load |