BTF3050TEATMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTF3050TEATMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTF3050TEATMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,38 | $1,68 |
| Switch Type | N-Channel Low-Side Power Switch | — |
| Configuration de sortie | 1:1 (Single channel) | — |
| Continuous Drain Current (ID) | 3 A | — |
| On-Resistance (RDS(on)) Max | 100 mOhm | — |
| Current Limit (Internal) | 30 A | — |
| Logic Input Voltage (Vcc) | 3.0 V to 5.5 V | — |
| Logic Input Compatibility | 3.3 V / 5 V CMOS | — |
| Turn-On Time Max | 15 us | — |
| Turn-Off Time Max | 30 us | — |
| Adjustable Slew Rate | Yes (SR pin) | — |
| ESD Protection | Yes (on-chip) | — |
| Plage de température de fonctionnement | -40 C to +150 C | — |
| Boîtier | PG-TO252-5-11 (DPAK-5) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount (DPAK tab) | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Family | HITFET+ (low-side) | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Topologie | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |