BTH60801EPLXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTH60801EPLXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTH60801EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,74 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 4 |
| Topologie | High-Side N-Channel MOSFET with Charge Pump | — |
| On-State Resistance (RDS(on)) | 80 mΩ (typical) | — |
| Continuous Load Current | 2.5 A | — |
| Operating Voltage Range | 4 V to 54 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Nominal Board Net | 48 V (PROFET+ 48V family) | — |
| Current Limitation | Adjustable | — |
| Diagnostic Output | Current Sense (IS) pin | — |
| Input Logic | Active High and Active Low | — |
| Protection Features | Overtemperature, Overvoltage, Undervoltage, Short Circuit | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | -40 °C to +150 °C junction |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |