BTH60801EPLXUMA1 vs BTS70402EPGXUMA1 Comparação
Comparação detalhada lado a lado de BTH60801EPLXUMA1 por Infineon e BTS70402EPGXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTH60801EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,74 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 4 |
| Topologia | High-Side N-Channel MOSFET with Charge Pump | — |
| On-State Resistance (RDS(on)) | 80 mΩ (typical) | — |
| Continuous Load Current | 2.5 A | — |
| Operating Voltage Range | 4 V to 54 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Nominal Board Net | 48 V (PROFET+ 48V family) | — |
| Current Limitation | Adjustable | — |
| Diagnostic Output | Current Sense (IS) pin | — |
| Input Logic | Active High and Active Low | — |
| Protection Features | Overtemperature, Overvoltage, Undervoltage, Short Circuit | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Faixa de temperatura de operação | -40 °C to +150 °C (Tj) | -40 °C to +150 °C junction |
| Tipo de montagem | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Status RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Função | — | Smart High-Side Power Switch |
| Configuração de saída | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |