BTH60801EPLXUMA1 vs BTS70402EPGXUMA1 비교
다음의 상세 나란히 비교: BTH60801EPLXUMA1 제조: Infineon 및 BTS70402EPGXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTH60801EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.74 | $3.18 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 4 |
| 토폴로지 | High-Side N-Channel MOSFET with Charge Pump | — |
| On-State Resistance (RDS(on)) | 80 mΩ (typical) | — |
| Continuous Load Current | 2.5 A | — |
| Operating Voltage Range | 4 V to 54 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Nominal Board Net | 48 V (PROFET+ 48V family) | — |
| Current Limitation | Adjustable | — |
| Diagnostic Output | Current Sense (IS) pin | — |
| Input Logic | Active High and Active Low | — |
| Protection Features | Overtemperature, Overvoltage, Undervoltage, Short Circuit | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| 패키지 | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| 동작 온도 범위 | -40 °C to +150 °C (Tj) | -40 °C to +150 °C junction |
| 실장 유형 | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| RoHS 상태 | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| 기능 | — | Smart High-Side Power Switch |
| 출력 구성 | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |