EPC1064VLC20 vs EPC2LC20 Comparaison
Comparaison détaillée côte à côte de EPC1064VLC20 par Altera et EPC2LC20 par Altera. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1064VLC20 | EPC2LC20 |
|---|---|---|
| Marque | Altera | Altera |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,51 | $7,20 |
| Type de mémoire | OTP (One-Time Programmable) Configuration PROM | Non-volatile configuration PROM |
| Taille de mémoire | 65,536 bit (64 Kb) | 1.6 Mbit |
| Organisation de la mémoire | 64K x 1 (serial) | — |
| Interface | Serial, daisy-chain capable | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V (5.0 V nominal) | — |
| Programmable Type | OTP (factory programmed; not in-system programmable) | — |
| Boîtier | 20-pin PLCC (J-lead, 9 x 9 mm) | 20-pin PLCC (J-lead, 9x9 mm) |
| Température de fonctionnement | 0C to +70C (commercial) | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Cascade Support | Yes, daisy-chain output for up to 8 devices | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| Type de montage | Surface Mount (PLCC socket compatible) | Surface Mount |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | Non-Compliant (original Altera Pb-containing part) |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Programming Method | Altera programming hardware (factory, pre-solder) | — |
| Configuration Interface | — | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Programming Interface | — | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |