INA118PB vs INA118P Comparaison
Comparaison détaillée côte à côte de INA118PB par Texas Instruments et INA118P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA118PB - Precision Instrumentation Amplifier | Texas Instruments
INA118PB ✓ ActifTexas Instruments
INA118P - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118P ✓ ActifComparaison des spécifications
| Paramètre | INA118PB | INA118P |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp design | Three-op-amp design with current-feedback input circuitry |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 110 dB at G = 1000 | — |
| Maximum Input Voltage | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Single-Supply Voltage | 1.35 V | — |
| Minimum Dual-Supply Voltage | ±2.25 V | — |
| Courant de repos | 350 uA | 350 µA |
| Gain Range | 1 to 10,000 | 1 to 10000 |
| Bandwidth at Gain of 100 | 70 kHz | — |
| Plage de température de fonctionnement | -40°C to +85°C | — |
| Boîtier | 8-pin plastic DIP | 8-pin plastic DIP |
| Type de montage | Through-hole | Through-hole |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Number of Amplifier Circuits | — | 1 circuit |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Common-Mode Rejection Ratio | — | 110 dB minimum at gain 1000 |
| Input Bias Current | — | 5 nA maximum |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Gain Setting | — | One external resistor |
| Bandwidth | — | 70 kHz at gain 100 |
| Température de fonctionnement | — | -40°C to +85°C |