INA118PB vs INA118P 비교
다음의 상세 나란히 비교: INA118PB 제조: Texas Instruments 및 INA118P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA118P - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118P ✓ 활성사양 비교
| 파라미터 | INA118PB | INA118P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Precision instrumentation amplifier | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp design | Three-op-amp design with current-feedback input circuitry |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 110 dB at G = 1000 | — |
| Maximum Input Voltage | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Single-Supply Voltage | 1.35 V | — |
| Minimum Dual-Supply Voltage | ±2.25 V | — |
| 대기 전류 | 350 uA | 350 µA |
| Gain Range | 1 to 10,000 | 1 to 10000 |
| Bandwidth at Gain of 100 | 70 kHz | — |
| 동작 온도 범위 | -40°C to +85°C | — |
| 패키지 | 8-pin plastic DIP | 8-pin plastic DIP |
| 실장 유형 | Through-hole | Through-hole |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Number of Amplifier Circuits | — | 1 circuit |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Common-Mode Rejection Ratio | — | 110 dB minimum at gain 1000 |
| Input Bias Current | — | 5 nA maximum |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Gain Setting | — | One external resistor |
| Bandwidth | — | 70 kHz at gain 100 |
| 동작 온도 | — | -40°C to +85°C |