ISO1042QDWVRQ1 vs ISO1042DWV Comparaison
Comparaison détaillée côte à côte de ISO1042QDWVRQ1 par Texas Instruments et ISO1042DWV par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1042QDWVRQ1 - Isolated CAN Transceiver 5Mbps 8-SOIC | TI
ISO1042QDWVRQ1 ✓ ActifTexas Instruments
ISO1042DWV - 5 Mbps Reinforced Isolated CAN | Texas Instruments
ISO1042DWV ✓ ActifComparaison des spécifications
| Paramètre | ISO1042QDWVRQ1 | ISO1042DWV |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Isolated CAN Transceiver | Digitally isolated CAN transceiver |
| Protocol | CAN, CAN FD per ISO 11898-2 (2016) | — |
| Number of Channels | 1/1 (half duplex) | — |
| Data Rate (max) | 5 Mbps (CAN FD flexible data rate) | — |
| Isolation Voltage | 2.5 kV RMS (per VDE 0884-11) | — |
| Bus Fault Protection (DC) | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | ±30 V |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us typical | — |
| Logic-Side Supply (VCC1) | 1.7 V to 5.5 V | — |
| Bus-Side Supply (VCC2) | 4.5 V to 5.5 V | — |
| Plage de température de fonctionnement | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | SOIC-8 (DWV) 5.85 x 6.5 mm wide-body, 8 pins | 8-pin wide-body SOIC (DWV) |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN FD Data Rate | — | 5 Mbps |
| Loop Delay | — | 152 ns |
| DC Bus Fault Protection | — | ±70 V |
| Isolation Withstand Voltage | — | 5000 VRMS |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| Isolation Type | — | Reinforced |
| Nombre de broches | — | 8 pins |
| Evaluation Module | — | ISO1042DWVEVM |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |