ISO1042QDWVRQ1 vs ISO1042DWV Karşılaştırma
Ayrıntılı yan yana karşılaştırma ISO1042QDWVRQ1 tarafından Texas Instruments ve ISO1042DWV tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
ISO1042QDWVRQ1 - Isolated CAN Transceiver 5Mbps 8-SOIC | TI
ISO1042QDWVRQ1 ✓ AktifTexas Instruments
ISO1042DWV - 5 Mbps Reinforced Isolated CAN | Texas Instruments
ISO1042DWV ✓ AktifÖzellik Karşılaştırması
| Parametre | ISO1042QDWVRQ1 | ISO1042DWV |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Isolated CAN Transceiver | Digitally isolated CAN transceiver |
| Protocol | CAN, CAN FD per ISO 11898-2 (2016) | — |
| Number of Channels | 1/1 (half duplex) | — |
| Data Rate (max) | 5 Mbps (CAN FD flexible data rate) | — |
| Isolation Voltage | 2.5 kV RMS (per VDE 0884-11) | — |
| Bus Fault Protection (DC) | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | ±30 V |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us typical | — |
| Logic-Side Supply (VCC1) | 1.7 V to 5.5 V | — |
| Bus-Side Supply (VCC2) | 4.5 V to 5.5 V | — |
| İşletim Sıcaklığı Aralığı | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (DWV) 5.85 x 6.5 mm wide-body, 8 pins | 8-pin wide-body SOIC (DWV) |
| Montaj Türü | Surface Mount | Surface mount |
| MSL Seviyesi | [DATA_NEEDED: MSL level] | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN FD Data Rate | — | 5 Mbps |
| Loop Delay | — | 152 ns |
| DC Bus Fault Protection | — | ±70 V |
| Isolation Withstand Voltage | — | 5000 VRMS |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| Isolation Type | — | Reinforced |
| Pin Sayısı | — | 8 pins |
| Evaluation Module | — | ISO1042DWVEVM |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |