ISO1042QDWVRQ1 vs ISO1042DWV Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ISO1042QDWVRQ1 disebabkan oleh Texas Instruments dan ISO1042DWV disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
ISO1042QDWVRQ1 - Isolated CAN Transceiver 5Mbps 8-SOIC | TI
ISO1042QDWVRQ1 ✓ AktifTexas Instruments
ISO1042DWV - 5 Mbps Reinforced Isolated CAN | Texas Instruments
ISO1042DWV ✓ AktifPengandingan Spesifikasi
| Parametr | ISO1042QDWVRQ1 | ISO1042DWV |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Isolated CAN Transceiver | Digitally isolated CAN transceiver |
| Protocol | CAN, CAN FD per ISO 11898-2 (2016) | — |
| Number of Channels | 1/1 (half duplex) | — |
| Data Rate (max) | 5 Mbps (CAN FD flexible data rate) | — |
| Isolation Voltage | 2.5 kV RMS (per VDE 0884-11) | — |
| Bus Fault Protection (DC) | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | ±30 V |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us typical | — |
| Logic-Side Supply (VCC1) | 1.7 V to 5.5 V | — |
| Bus-Side Supply (VCC2) | 4.5 V to 5.5 V | — |
| Gambaran Suhu Operasi | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Kemasan | SOIC-8 (DWV) 5.85 x 6.5 mm wide-body, 8 pins | 8-pin wide-body SOIC (DWV) |
| Jenis Pemasangan | Surface Mount | Surface mount |
| Aras MSL | [DATA_NEEDED: MSL level] | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN FD Data Rate | — | 5 Mbps |
| Loop Delay | — | 152 ns |
| DC Bus Fault Protection | — | ±70 V |
| Isolation Withstand Voltage | — | 5000 VRMS |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| Isolation Type | — | Reinforced |
| Kiraan Pin | — | 8 pins |
| Evaluation Module | — | ISO1042DWVEVM |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |