ISO120SG vs ISO120BG Comparaison
Comparaison détaillée côte à côte de ISO120SG par Texas Instruments et ISO120BG par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO120BG - Precision 60kHz Isolation Amplifier | Texas Instruments
ISO120BG ✓ ActifComparaison des spécifications
| Paramètre | ISO120SG | ISO120BG |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $471,79 | $0,00 |
| Product Type | Precision low-cost isolation amplifier | Precision low-cost isolation amplifier |
| Isolation Architecture | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier | — |
| Signal Bandwidth | 60 kHz | — |
| Isolation Voltage Rating | 1500 Vrms | — |
| Nonlinearity | ±0.01% maximum at the precision operating condition | ±0.01% maximum |
| Input Offset Voltage Drift | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition | — |
| Common-Mode Rejection | High IMR at 60 Hz | — |
| Carrier Frequency | User controlled | User control |
| Supply Operation | Bipolar operation | — |
| Number of Circuits | 1 isolation amplifier per package | 1 circuit |
| Package Information | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing | — |
| Package Family | Ceramic dual in-line package (CDIP) | — |
| Partial Discharge Qualification | 100% tested for partial discharge | — |
| External Components | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation | — |
| Synchronization | ISO120 family synchronization feature | — |
| Température de fonctionnement | [DATA_NEEDED: ISO120SG operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Tension d'alimentation | [DATA_NEEDED: ISO120SG supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Differential Voltage Range | [DATA_NEEDED: ISO120SG input differential voltage range] | — |
| Plage de tension de sortie | [DATA_NEEDED: ISO120SG output voltage range] | — |
| Statut RoHS | [DATA_NEEDED: ISO120SG RoHS status] | — |
| REACH Status | [DATA_NEEDED: ISO120SG REACH status] | — |
| Bandwidth | — | 60 kHz |
| Operation Mode | — | Bipolar operation |
| Isolation Voltage | — | 1500 Vrms |
| Partial Discharge Testing | — | 100% tested |
| Isolation Barrier | — | 2 pF differential capacitive barrier |
| External Components for 60 kHz Bandwidth | — | No external components required |
| Precision Configuration | — | Two external capacitors can be added |
| Boîtier | — | 24-CDIP hermetic DIP, 16 leads |
| Package Length | — | 0.300 in (7.62 mm) |
| Type de montage | — | Through-hole |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Tension de sortie | — | [DATA_NEEDED: output voltage range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Gain | — | [DATA_NEEDED: gain] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |