ISO120SG vs ISO120BG 비교
다음의 상세 나란히 비교: ISO120SG 제조: Texas Instruments 및 ISO120BG 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ISO120SG | ISO120BG |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Unknown | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $471.79 | $0.00 |
| Product Type | Precision low-cost isolation amplifier | Precision low-cost isolation amplifier |
| Isolation Architecture | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier | — |
| Signal Bandwidth | 60 kHz | — |
| Isolation Voltage Rating | 1500 Vrms | — |
| Nonlinearity | ±0.01% maximum at the precision operating condition | ±0.01% maximum |
| Input Offset Voltage Drift | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition | — |
| Common-Mode Rejection | High IMR at 60 Hz | — |
| Carrier Frequency | User controlled | User control |
| Supply Operation | Bipolar operation | — |
| Number of Circuits | 1 isolation amplifier per package | 1 circuit |
| Package Information | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing | — |
| Package Family | Ceramic dual in-line package (CDIP) | — |
| Partial Discharge Qualification | 100% tested for partial discharge | — |
| External Components | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation | — |
| Synchronization | ISO120 family synchronization feature | — |
| 동작 온도 | [DATA_NEEDED: ISO120SG operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전압 | [DATA_NEEDED: ISO120SG supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Differential Voltage Range | [DATA_NEEDED: ISO120SG input differential voltage range] | — |
| 출력 전압 범위 | [DATA_NEEDED: ISO120SG output voltage range] | — |
| RoHS 상태 | [DATA_NEEDED: ISO120SG RoHS status] | — |
| REACH Status | [DATA_NEEDED: ISO120SG REACH status] | — |
| Bandwidth | — | 60 kHz |
| Operation Mode | — | Bipolar operation |
| Isolation Voltage | — | 1500 Vrms |
| Partial Discharge Testing | — | 100% tested |
| Isolation Barrier | — | 2 pF differential capacitive barrier |
| External Components for 60 kHz Bandwidth | — | No external components required |
| Precision Configuration | — | Two external capacitors can be added |
| 패키지 | — | 24-CDIP hermetic DIP, 16 leads |
| Package Length | — | 0.300 in (7.62 mm) |
| 실장 유형 | — | Through-hole |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| 출력 전압 | — | [DATA_NEEDED: output voltage range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Gain | — | [DATA_NEEDED: gain] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |