ISO1432DW vs ISO1410BDW Comparaison
Comparaison détaillée côte à côte de ISO1432DW par Texas Instruments et ISO1410BDW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1432DW - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI
ISO1432DW ✓ ActifTexas Instruments
ISO1410BDW - 500kbps Isolated RS-485/RS-422 | Texas Instruments
ISO1410BDW ✓ ActifComparaison des spécifications
| Paramètre | ISO1432DW | ISO1410BDW |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Drivers, Receivers, Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| Température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 16-pin SOIC (DW) | 16-pin wide-body SOIC (DW) |
| Type de montage | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | — |
| UL Recognition | UL 1577 recognized | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated RS-485/RS-422 transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Isolation Rating | — | 5 kVrms |
| Number of Transceivers | — | 1 |
| Logic and Bus Side | — | Isolated RS-485 and RS-422 |
| Plage de température de fonctionnement | — | -40°C to +125°C |
| Package Pin Count | — | 16 pins |
| EMC Protection | — | EMC-protected bus pins |
| Isolation Technology | — | Silicon-dioxide-based capacitive isolation |
| Digital Isolation Channels | — | 3 channels |
| Supported Standards | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Lead Finish | — | [DATA_NEEDED: lead finish] |