ISO1432DW vs ISO1410BDW Сравнение
Подробное сравнение бок о бок ISO1432DW от Texas Instruments и ISO1410BDW от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
ISO1432DW - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI
ISO1432DW ✓ АктивенTexas Instruments
ISO1410BDW - 500kbps Isolated RS-485/RS-422 | Texas Instruments
ISO1410BDW ✓ АктивенСравнение характеристик
| Параметр | ISO1432DW | ISO1410BDW |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Drivers, Receivers, Transceivers | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Функция | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| Рабочая температура | -40 °C to +125 °C | — |
| Корпус | 16-pin SOIC (DW) | 16-pin wide-body SOIC (DW) |
| Тип монтажа | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | — |
| UL Recognition | UL 1577 recognized | — |
| Статус RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Уровень MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated RS-485/RS-422 transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Isolation Rating | — | 5 kVrms |
| Number of Transceivers | — | 1 |
| Logic and Bus Side | — | Isolated RS-485 and RS-422 |
| Диапазон рабочих температур | — | -40°C to +125°C |
| Package Pin Count | — | 16 pins |
| EMC Protection | — | EMC-protected bus pins |
| Isolation Technology | — | Silicon-dioxide-based capacitive isolation |
| Digital Isolation Channels | — | 3 channels |
| Supported Standards | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Lead Finish | — | [DATA_NEEDED: lead finish] |