ISO1432DW vs ISO1410BDW तुलना
विस्तृत दोनों ओर की तुलना ISO1432DW द्वारा Texas Instruments और ISO1410BDW द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO1432DW - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI
ISO1432DW ✓ सक्रियTexas Instruments
ISO1410BDW - 500kbps Isolated RS-485/RS-422 | Texas Instruments
ISO1410BDW ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO1432DW | ISO1410BDW |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Drivers, Receivers, Transceivers | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| ऑपरेटिंग तापमान | -40 °C to +125 °C | — |
| पैकेज | 16-pin SOIC (DW) | 16-pin wide-body SOIC (DW) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | — |
| UL Recognition | UL 1577 recognized | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| MSL स्तर | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated RS-485/RS-422 transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Isolation Rating | — | 5 kVrms |
| Number of Transceivers | — | 1 |
| Logic and Bus Side | — | Isolated RS-485 and RS-422 |
| ऑपरेटिंग तापमान रेंज | — | -40°C to +125°C |
| Package Pin Count | — | 16 pins |
| EMC Protection | — | EMC-protected bus pins |
| Isolation Technology | — | Silicon-dioxide-based capacitive isolation |
| Digital Isolation Channels | — | 3 channels |
| Supported Standards | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Lead Finish | — | [DATA_NEEDED: lead finish] |