LM2901DR2G vs LM2901VDG Comparaison
Comparaison détaillée côte à côte de LM2901DR2G par onsemi et LM2901VDG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2901DR2G | LM2901VDG |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Quad differential comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Plage de température de fonctionnement | -40°C to +105°C | -40°C to +125°C |
| Type de sortie | Open collector | Open-collector, CMOS and TTL compatible |
| Logic Compatibility | CMOS and TTL | — |
| Boîtier | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Automotive-Grade Variant | NCV2901 family variant identified by onsemi | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Leakage Current | [DATA_NEEDED: output leakage current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | [DATA_NEEDED: halogen-free status] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |