LM2901DR2G vs LM2901VDG 비교
다음의 상세 나란히 비교: LM2901DR2G 제조: onsemi 및 LM2901VDG 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM2901DR2G | LM2901VDG |
|---|---|---|
| 브랜드 | onsemi | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Quad differential comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| 동작 온도 범위 | -40°C to +105°C | -40°C to +125°C |
| 출력 유형 | Open collector | Open-collector, CMOS and TTL compatible |
| Logic Compatibility | CMOS and TTL | — |
| 패키지 | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| 실장 유형 | Surface mount | Surface mount |
| Automotive-Grade Variant | NCV2901 family variant identified by onsemi | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Leakage Current | [DATA_NEEDED: output leakage current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | [DATA_NEEDED: halogen-free status] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |