LM2901DR2G vs LM2901VDG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2901DR2G tarafından onsemi ve LM2901VDG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2901DR2G | LM2901VDG |
|---|---|---|
| Marka | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Quad differential comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| İşletim Sıcaklığı Aralığı | -40°C to +105°C | -40°C to +125°C |
| Çıkış Türü | Open collector | Open-collector, CMOS and TTL compatible |
| Logic Compatibility | CMOS and TTL | — |
| Paket | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Montaj Türü | Surface mount | Surface mount |
| Automotive-Grade Variant | NCV2901 family variant identified by onsemi | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Besleme Akımı | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Leakage Current | [DATA_NEEDED: output leakage current] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | [DATA_NEEDED: halogen-free status] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |