LM2901PWR vs LM2904PWR Comparaison
Comparaison détaillée côte à côte de LM2901PWR par Texas Instruments et LM2904PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2901PWR - Quad 30V Open-Collector Comparator | Texas Instruments
LM2901PWR ✓ ActifTexas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ ActifComparaison des spécifications
| Paramètre | LM2901PWR | LM2904PWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | General-purpose differential comparator | — |
| Number of Channels | 4 channels | — |
| Tension d'alimentation | 2 V to 36 V | — |
| Dual Supply Voltage | ±1 V to ±18 V | — |
| Maximum Rated Supply | 38 V | — |
| Type de sortie | Open-collector | — |
| Logic Compatibility | TTL, MOS, and CMOS | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Courant d'alimentation | 200 µA per comparator | — |
| Response Time | 1 µs | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Differential Input Voltage Range | ±38 V | — |
| ESD Rating | 2 kV HBM | — |
| Boîtier | 14-pin TSSOP | 8-TSSOP, 4.40 mm width |
| Type de montage | Surface mount | Surface mount |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |