LM2903DG vs LM2903QDG4 Comparaison
Comparaison détaillée côte à côte de LM2903DG par onsemi et LM2903QDG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ ActifComparaison des spécifications
| Paramètre | LM2903DG | LM2903QDG4 |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Dual differential comparator |
| Type de sortie | Open-collector, rail-to-rail output swing | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | — |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Plage de température de fonctionnement | -40C to +105C | -40 °C to 125 °C |
| Boîtier | SOIC-8 (D suffix), 8 pins | 8-pin SOIC, 3.90 mm width |
| Type de montage | Surface Mount | Surface mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparator Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Single-Supply Operation | — | Supported |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |