LM2903DG vs LM2903QDG4 Сравнение
Подробное сравнение бок о бок LM2903DG от onsemi и LM2903QDG4 от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ АктивенСравнение характеристик
| Параметр | LM2903DG | LM2903QDG4 |
|---|---|---|
| Бренд | onsemi | Texas Instruments |
| Категория | Amplifier ICs | Amplifier ICs |
| Статус жизненного цикла | Активен | Активен |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Dual differential comparator |
| Тип выхода | Open-collector, rail-to-rail output swing | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | — |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Диапазон рабочих температур | -40C to +105C | -40 °C to 125 °C |
| Корпус | SOIC-8 (D suffix), 8 pins | 8-pin SOIC, 3.90 mm width |
| Тип монтажа | Surface Mount | Surface mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparator Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Single-Supply Operation | — | Supported |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Статус RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |