LM2903DG vs LM2903QDG4 So sánh
So sánh chi tiết song song của LM2903DG bằng onsemi và LM2903QDG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903DG | LM2903QDG4 |
|---|---|---|
| Thương hiệu | onsemi | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Dual differential comparator |
| Kiểu đầu ra | Open-collector, rail-to-rail output swing | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | — |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Khoảng nhiệt độ hoạt động | -40C to +105C | -40 °C to 125 °C |
| Hộp | SOIC-8 (D suffix), 8 pins | 8-pin SOIC, 3.90 mm width |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparator Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Single-Supply Operation | — | Supported |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |