LM2903DG4 vs LM2903DRG4 Comparaison
Comparaison détaillée côte à côte de LM2903DG4 par Texas Instruments et LM2903DRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903DRG4 - Dual 30V Open-Collector Comparator | Texas Instruments
LM2903DRG4 ✓ ActifComparaison des spécifications
| Paramètre | LM2903DG4 | LM2903DRG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single or dual supply | — |
| Maximum-Rated Supply Voltage | 32 V | — |
| Tested Differential Input Voltage | 30 V | — |
| Supply-Current Drain | 0.4 mA typical per comparator | — |
| Type de sortie | Open-collector | Open-collector |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Boîtier | 8-pin SOIC, 0.154 inch (3.90 mm) width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 30 V |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range, Dual Supply | — | 2 V to 36 V total supply difference |
| Differential Input Voltage | — | ±38 V |
| Propagation Delay | — | 1.3 us |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Output Logic Compatibility | — | TTL, MOS, and CMOS |
| Input Pins | — | 2 differential input pins per comparator |
| Output Pins | — | 2 open-collector output pins |
| Supply Pins | — | VCC and ground |
| Automotive Qualification | — | Not stated in the verified manufacturer information |