LM2903DG4 vs LM2903DRG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903DG4 tarafından Texas Instruments ve LM2903DRG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2903DRG4 - Dual 30V Open-Collector Comparator | Texas Instruments
LM2903DRG4 ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2903DG4 | LM2903DRG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single or dual supply | — |
| Maximum-Rated Supply Voltage | 32 V | — |
| Tested Differential Input Voltage | 30 V | — |
| Supply-Current Drain | 0.4 mA typical per comparator | — |
| Çıkış Türü | Open-collector | Open-collector |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Paket | 8-pin SOIC, 0.154 inch (3.90 mm) width | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 30 V |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range, Dual Supply | — | 2 V to 36 V total supply difference |
| Differential Input Voltage | — | ±38 V |
| Propagation Delay | — | 1.3 us |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Output Logic Compatibility | — | TTL, MOS, and CMOS |
| Input Pins | — | 2 differential input pins per comparator |
| Output Pins | — | 2 open-collector output pins |
| Supply Pins | — | VCC and ground |
| Automotive Qualification | — | Not stated in the verified manufacturer information |