LM2903DG4 vs LM2903DRG4 Comparação
Comparação detalhada lado a lado de LM2903DG4 por Texas Instruments e LM2903DRG4 por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
LM2903DRG4 - Dual 30V Open-Collector Comparator | Texas Instruments
LM2903DRG4 ✓ AtivoComparação de especificações
| Parâmetro | LM2903DG4 | LM2903DRG4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single or dual supply | — |
| Maximum-Rated Supply Voltage | 32 V | — |
| Tested Differential Input Voltage | 30 V | — |
| Supply-Current Drain | 0.4 mA typical per comparator | — |
| Tipo de saída | Open-collector | Open-collector |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Encapsulamento | 8-pin SOIC, 0.154 inch (3.90 mm) width | 8-pin SOIC |
| Tipo de montagem | Surface mount | Surface mount |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 30 V |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range, Dual Supply | — | 2 V to 36 V total supply difference |
| Differential Input Voltage | — | ±38 V |
| Propagation Delay | — | 1.3 us |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Output Logic Compatibility | — | TTL, MOS, and CMOS |
| Input Pins | — | 2 differential input pins per comparator |
| Output Pins | — | 2 open-collector output pins |
| Supply Pins | — | VCC and ground |
| Automotive Qualification | — | Not stated in the verified manufacturer information |