LM2903VQPWRQ1 vs LM2902KAVQPWRQ1 Comparaison
Comparaison détaillée côte à côte de LM2903VQPWRQ1 par Texas Instruments et LM2902KAVQPWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ ActifComparaison des spécifications
| Paramètre | LM2903VQPWRQ1 | LM2902KAVQPWRQ1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual general-purpose differential comparator | — |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single supply or dual supplies | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Minimum VCC Margin | At least 1.5 V above the lower supply | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Type de sortie | Open-collector | — |
| Common-Mode Input Range | Rail-to-rail | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 qualified |
| ESD Rating | 2 kV | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Boîtier | 8-pin TSSOP | 14-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range by grade] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Shipping Format | Tape and reel | — |
| Number of Amplifier Channels | — | 4 channels |
| Operating Supply Voltage Range | — | 3 V to 32 V |
| Nominal Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Slew Rate | — | 0.5 V/µs |
| Improved ESD Capability | — | 2 kV |
| Input Common-Mode Voltage | — | Includes ground |
| Architecture | — | Bipolar voltage-feedback operational amplifier |
| Temperature Grade | — | A to K temperature range |
| Packaging Method | — | Tape and reel |
| Channel Count | — | 4 independent amplifiers |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |