LM2903VQPWRQ1 vs LM2902KAVQPWRQ1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903VQPWRQ1 tarafından Texas Instruments ve LM2902KAVQPWRQ1 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2903VQPWRQ1 | LM2902KAVQPWRQ1 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual general-purpose differential comparator | — |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single supply or dual supplies | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Minimum VCC Margin | At least 1.5 V above the lower supply | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Çıkış Türü | Open-collector | — |
| Common-Mode Input Range | Rail-to-rail | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 qualified |
| ESD Rating | 2 kV | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Paket | 8-pin TSSOP | 14-pin TSSOP |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range by grade] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Shipping Format | Tape and reel | — |
| Number of Amplifier Channels | — | 4 channels |
| Operating Supply Voltage Range | — | 3 V to 32 V |
| Nominal Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Slew Rate | — | 0.5 V/µs |
| Improved ESD Capability | — | 2 kV |
| Input Common-Mode Voltage | — | Includes ground |
| Architecture | — | Bipolar voltage-feedback operational amplifier |
| Temperature Grade | — | A to K temperature range |
| Packaging Method | — | Tape and reel |
| Channel Count | — | 4 independent amplifiers |
| RoHS Durumu | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |