LM2903VQPWRQ1 vs LM2902KAVQPWRQ1 So sánh
So sánh chi tiết song song của LM2903VQPWRQ1 bằng Texas Instruments và LM2902KAVQPWRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903VQPWRQ1 | LM2902KAVQPWRQ1 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual general-purpose differential comparator | — |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single supply or dual supplies | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Minimum VCC Margin | At least 1.5 V above the lower supply | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Kiểu đầu ra | Open-collector | — |
| Common-Mode Input Range | Rail-to-rail | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 qualified |
| ESD Rating | 2 kV | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Hộp | 8-pin TSSOP | 14-pin TSSOP |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range by grade] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Shipping Format | Tape and reel | — |
| Number of Amplifier Channels | — | 4 channels |
| Operating Supply Voltage Range | — | 3 V to 32 V |
| Nominal Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Slew Rate | — | 0.5 V/µs |
| Improved ESD Capability | — | 2 kV |
| Input Common-Mode Voltage | — | Includes ground |
| Architecture | — | Bipolar voltage-feedback operational amplifier |
| Temperature Grade | — | A to K temperature range |
| Packaging Method | — | Tape and reel |
| Channel Count | — | 4 independent amplifiers |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |